Yaheetech Portable 3-Folding Massage Table

Introduction

This manual provides essential instructions for the safe and effective use of your Yaheetech Portable 3-Folding Massage Table. Please read this manual thoroughly before initial setup and operation, and retain it for future reference.

Image: The Yaheetech Portable 3-Folding Massage Table, fully assembled and ready for use. It features a pink padded surface, adjustable headrest, and armrests, supported by an aluminum frame.

Safety Information

To ensure safe operation and prevent injury or damage, observe the following safety guidelines:

• Ensure proper assembly for stability before each use.
• Do not exceed the maximum load capacity of the table.
• Exercise caution when adjusting the height and backrest to prevent pinching or sudden movements.
• Keep hands and fingers clear of moving parts during folding and unfolding.
• Place the table on a flat, stable surface.

Package Contents

Verify that all components are present upon unpacking:

• Portable 3-Folding Massage Table (main unit)
• Adjustable Headrest
• Pair of Armrests
• Hand Pallet
• Non-Woven Carrying Bag

Image: An illustration showing the various components of the massage table, including the adjustable bed end, armrests, face cradle (headrest), swing hand pallet, adjustment knob for height, and foot pads.

Setup Instructions

The Yaheetech Portable Massage Table is designed for quick and easy setup without tools.

1. Unfolding the Table: Place the folded table on its side. Release the clasps. Gently unfold the table from the middle, allowing the legs to extend automatically. Ensure all legs are fully extended and locked into position.
2. Attaching Accessories:
   • Headrest: Insert the headrest support bars into the designated slots at one end of the table. Secure it using the quick-lock system.
   • Armrests: Slide the armrests into the slots located on the sides of the table.
   • Hand Pallet: Attach the hand pallet to the headrest assembly if desired.

Image: A four-panel illustration demonstrating the setup process: 1. Carrying the folded table. 2. Unfolding the table. 3. Attaching the headrest and armrests. 4. The fully assembled table.

Operating Instructions

Customize the table to suit your needs with its adjustable features.

Adjusting Table Height

The table offers 8 different height options. To adjust, locate the adjustment knobs on each leg. Press the button on the leg to release the lock, slide the inner leg to the desired height, and ensure the button snaps securely into one of the pre-drilled holes. Repeat for all legs, ensuring the table is level.

Adjusting Backrest

The backrest can be adjusted to various angles. Lift the backrest to the desired incline. The support mechanism will lock into place. To lower, lift the backrest slightly to disengage the lock, then gently lower it.

Adjusting Headrest

The headrest features a quick-lock system for angle adjustment. Lift the lever to unlock the headrest, adjust it to the desired angle, and push the lever down to lock it securely. The headrest is attached with hook-and-loop fasteners and includes a hand pallet for user comfort.

Image: Detailed view of the headrest adjustment mechanism. One image shows lifting a lever to unlock the headrest for height adjustment, and another shows pushing the lever down to lock it in place.

Maintenance

Proper care will extend the life of your massage table.

• Cleaning: Wipe the PVC leather surface with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. Dry thoroughly.
• Frame Care: Periodically check the aluminum frame for any loose screws or connections and tighten as necessary. Clean the frame with a damp cloth.
• Storage: When not in use, fold the table and store it in its non-woven carrying bag in a dry, cool place away from direct sunlight.

Image: A close-up showing the soft, resilient high-density foam padding and the skin-friendly, breathable PVC leather covering of the massage table, highlighting the material quality.

Folding and Portability

The table is designed to fold into a compact, portable case for easy transport and storage.

1. Remove all accessories (headrest, armrests, hand pallet).
2. Ensure the backrest is fully lowered.
3. Collapse the legs by releasing the height adjustment buttons and pushing the inner legs fully in.
4. Fold the table inward from the middle. Secure the clasps on the side to keep it closed.
5. Place the folded table into the non-woven carrying bag for protection and easy transport.

Image: A four-panel illustration demonstrating the folding process: 1. Carrying the folded table. 2. Unfolding the table. 3. Attaching the headrest and armrests. 4. The fully assembled table. (This image also illustrates the reverse process for folding).

Troubleshooting

If you encounter issues with your massage table, consider the following:

• Table Wobbles: Ensure all legs are fully extended and locked into their height adjustment positions. Verify the table is on a flat, even surface.
• Difficulty Adjusting Height/Backrest: Check for any obstructions or debris in the adjustment mechanisms. Ensure release buttons/levers are fully engaged or disengaged as required.
• Accessories Not Fitting: Confirm that accessories are oriented correctly and inserted into the appropriate slots. Do not force components.

Specifications

Image: A detailed diagram illustrating the dimensions of the Yaheetech Portable 3-Folding Massage Table, including length, width, height range, and folded dimensions.

Warranty and Support

For warranty information, product support, or to purchase replacement parts, please contact Yaheetech customer service. Refer to the product packaging or the official Yaheetech website for contact details.