Introduction
This manual provides comprehensive instructions for the operation and maintenance of your Discovery Kids Multi Function Digital Watch. Designed for active children, this watch combines durability with essential digital functions. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.
"Discovery Kids Watch is a perfect blend of style, fashion, and function. This easy to wear watch has a Fast Wrap Band which makes it easy for kids to put on and take off. Sporty and Adventurous; Water Resistant; Glow Light; and Stopwatch with Lap Times. Kid Approved!"
Key Features
- Nylon Easy Fast Wrap Band: Designed for quick and easy wearing and removal, ideal for children.
- 30 Meter Water Resistance: Suitable for splashes, rain, and brief immersion in water. Not recommended for swimming or diving.
- Backlight Function: Illuminates the display for visibility in low-light conditions.
- 6-Digit LCD Module: Clear digital display.
- Multi-Functionality: Includes Time, Date, Alarm, and Stopwatch with Lap Times.
- Sporty and Fashionable Design: Super fashionable color and style appealing to kids.
Watch Overview

Image: Front view of the Discovery Kids Multi Function Digital Watch. The watch features a vibrant lime green casing with a dark blue nylon fast-wrap strap. The digital display shows the time as 6:22 PM. Visible buttons are labeled 'MODE' on the left, 'LIGHT' on the top left, 'ST/STP' on the top right, and 'RESET' on the bottom right. The watch face also indicates "ALARM CHRONO" and "WR 30M" (Water Resistant 30 Meters).
Familiarize yourself with the watch's buttons and display indicators:
- MODE Button (Left-Middle): Cycles through Time, Alarm, Stopwatch modes.
- LIGHT Button (Top-Left): Activates the backlight.
- ST/STP Button (Top-Right): Starts/stops the stopwatch; adjusts settings in setting mode.
- RESET Button (Bottom-Right): Resets stopwatch; selects settings in setting mode.
- Bottom-Center Button (LIGHT): Also activates the backlight.
Setup and Initial Configuration
Setting Time and Date
- From the normal time display, press the MODE button three times to enter time setting mode. The seconds will flash.
- Press the RESET button to zero out the seconds.
- Press the ST/STP button to move to the next setting (hours).
- Press the RESET button to adjust the hours. Pay attention to AM/PM indicator.
- Repeat step 3 and 4 for minutes, month, date, and day of the week.
- Once all settings are adjusted, press the MODE button to exit setting mode and return to normal time display.
Operating Instructions
Using the Backlight
Press either the LIGHT button (top-left) or the button located at the bottom-center of the watch face to illuminate the display for a few seconds.
Alarm Function
- From the normal time display, press the MODE button once to enter Alarm mode. The alarm time will be displayed.
- Press the RESET button to turn the alarm ON/OFF. An alarm icon will appear when activated.
- To set the alarm time, press the ST/STP button. The hour digits will flash.
- Press the RESET button to adjust the hour.
- Press the ST/STP button to move to the minute digits.
- Press the RESET button to adjust the minutes.
- Press the MODE button to exit alarm setting mode.
Stopwatch Function
- From the normal time display, press the MODE button twice to enter Stopwatch mode. The display will show 00:00:00.
- Press the ST/STP button to start the stopwatch.
- Press the ST/STP button again to pause the stopwatch.
- To resume, press ST/STP again.
- To reset the stopwatch to zero, ensure it is paused, then press the RESET button.
- To record lap times, press the RESET button while the stopwatch is running. The lap time will freeze on the display for a few seconds while the stopwatch continues to run in the background.
- Press the MODE button to exit Stopwatch mode.
Maintenance and Care
- Water Resistance: The watch is 30-meter water resistant. This means it can withstand splashes, rain, and brief immersion. Do not press any buttons while the watch is wet or submerged. Avoid hot water, steam, or prolonged exposure to water.
- Cleaning: Wipe the watch with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the watch is dried thoroughly afterwards. Do not use chemical cleaners.
- Battery Replacement: The watch uses a standard watch battery. Battery replacement should ideally be performed by a qualified watch technician to ensure water resistance is maintained.
- Storage: When not in use, store the watch in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead battery. | Replace the battery. |
| Time is incorrect. | Time not set correctly or accidental button press. | Refer to "Setting Time and Date" section to reset. |
| Alarm does not sound. | Alarm is turned off or set incorrectly. | Ensure alarm is ON and time is set correctly in Alarm mode. |
| Water inside the watch. | Buttons pressed underwater or exceeding water resistance limits. | Immediately take to a watch repair specialist. Do not attempt to dry it yourself. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | DSC714AC |
| Manufacturer | Accutime |
| Water Resistance | 30 Meters (3 ATM) |
| Display Type | Digital LCD (6-digit) |
| Functions | Time (Hour/Minute/Second, AM/PM), Date (Month/Day/Day of Week), Alarm, Stopwatch with Lap Times, Backlight |
| Strap Type | Nylon Fast Wrap Band |
| Country of Origin | China |
| Approx. Dimensions | 9.7 x 7.1 x 6.6 cm (Parcel Dimensions) |
| Approx. Weight | 30 g (Parcel Weight) |
Warranty and Support
This product is manufactured by Accutime under the AWC DISCOVERY brand. For specific warranty information, please refer to the packaging or contact the retailer where the product was purchased. General support inquiries can be directed to the manufacturer's customer service.
For further assistance or technical support, please visit the official AWC DISCOVERY website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.





