Introduction
The Amplify Note 3.0 Series True Wireless Earphone Pods offer a cable-free audio experience with crisp stereo sound. Designed for daily use, these lightweight earphones provide reliable connectivity and intuitive controls. This manual provides essential information for setting up, operating, and maintaining your earphones.
Key Features:
- True Wireless Stereo Sound: Enjoy clear audio without cables.
- Bluetooth 5.3 Connectivity: Ensures faster pairing and a stable wireless connection.
- Built-in Microphone: For hands-free calling.
- Intuitive Touch Controls: Manage music and calls with simple taps.
- Up to 12 Hours Total Playtime: Includes charges from the compact charging case.
- USB-C Quick Charging: Efficient recharging in 1-2 hours.
- Compact Charging Case: Portable and convenient for travel.
- 13mm Audio Drivers: Deliver fuller sound quality.
What's in the Box:
- Amplify Note 3.0 TWS Earphones
- Charging Case
- USB-C Charging Cable
- Instruction Manual
Setup
1. Charging the Earphones and Case
- Place both earphones into the charging case.
- Connect the provided USB-C charging cable to the charging port on the case and a compatible USB power source.
- The indicator lights on the case will show charging status. A full charge typically takes 1-2 hours.
- Ensure the case is fully charged before first use to maximize battery life.
2. Initial Pairing
- Open the charging case. The earphones will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for available Bluetooth devices and select "Amplify Note 3.0 Series" from the list.
- Once connected, you will hear a confirmation tone, and the indicator lights on the earphones will change.
3. Wearing the Earphones
- Gently insert each earphone into your ear canal.
- Adjust them for a comfortable and secure fit to ensure optimal sound quality and stability.
Operating Instructions
Power On/Off
- Power On: Open the charging case, or long-press the touch area on both earphones for 3 seconds.
- Power Off: Place the earphones back into the charging case and close the lid, or long-press the touch area on both earphones for 5 seconds.
Bluetooth Connection
- After initial pairing, the earphones will automatically connect to the last paired device when removed from the case and Bluetooth is enabled on the device.
- If connection fails, ensure the earphones are charged and within range, then try re-pairing.
Touch Controls
The touch-sensitive areas on each earphone allow for easy control of music playback and calls.
- Play/Pause: Single tap on either earphone.
- Next Track: Double tap the right earphone.
- Previous Track: Double tap the left earphone.
- Answer/End Call: Single tap on either earphone during an incoming call.
- Reject Call: Long press on either earphone during an incoming call.
- Activate Voice Assistant: Triple tap on either earphone (if supported by your device).
Making and Receiving Calls
- When a call comes in, tap either earphone once to answer.
- To end a call, tap either earphone once.
- To reject an incoming call, long-press either earphone.
- The built-in microphone will automatically activate during calls.
Maintenance
Cleaning
- Regularly clean the earphones and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Gently remove any earwax or debris from the earphone grilles using a small, soft brush or cotton swab.
Storage
- Always store the earphones in their charging case when not in use to protect them and keep them charged.
- Store in a cool, dry place, away from extreme temperatures and direct sunlight.
Battery Care
- To prolong battery life, avoid fully discharging the earphones and charging case frequently.
- Charge the device regularly, even if not in frequent use.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Earphones not pairing with device. |
|
| No sound from earphones. |
|
| One earphone has no sound. |
|
| Charging case not charging. |
|
| Touch controls not responding. |
|
Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | Note 3.0 Series |
| Model Number | AM-1111-WT |
| Bluetooth Version | 5.3 |
| Bluetooth Range | Up to 10m |
| Profiles Supported | A2DP, HFP, SSPIAVRCP, HSP |
| Earbud Battery Capacity | 30mAh |
| Charging Case Battery Capacity | 230mAh |
| Charging Time | 1–2 Hours |
| Driver Size | 13mm |
| Impedance | 32Ω |
| Sensitivity | 108dB ± 3 (Earbuds), 120 dB (General) |
| Frequency Response | 20Hz – 20kHz (Earbuds), 20 KHz (General) |
| Playback Time (50% Volume) | 2.5–3 Hours |
| Playback Time (100% Volume) | 1–2 Hours |
| Total Playtime (with case) | Up to 12 Hours |
| Charging Port | USB-C |
| Form Factor | In Ear |
| Noise Control | Active Noise Cancellation (as per specifications, though description implies passive) |
| Manufacturer | SMD Technologies |
| Country of Origin | China |
Warranty Information
For detailed warranty information regarding your Amplify Note 3.0 Series True Wireless Earphone Pods, please refer to the product packaging or visit the official Amplify website. Keep your proof of purchase for any warranty claims.
Customer Support
If you encounter any issues or have questions not covered in this manual, please visit the official Amplify website for frequently asked questions, support resources, or to contact customer service.
You can find more information and support at: www.amplify.co.za
