Denver BTV-220GREY Portable Bluetooth Speaker User Manual

Introduction

Thank you for purchasing the Denver BTV-220GREY Portable Bluetooth Speaker. This manual provides essential information for the safe and correct use of your device. Please read these instructions thoroughly before use and keep them for future reference.

Product Overview

Package Contents

• Denver BTV-220GREY Portable Bluetooth Speaker
• USB Charging Cable
• User Manual

Speaker Components and Controls

Familiarize yourself with the various parts and controls of your speaker.

Image 1: Top view of the Denver BTV-220GREY speaker, showing the control panel with buttons for mode, volume/track control, power, and play/pause.

Image 2: Angled view of the Denver BTV-220GREY speaker, highlighting the illuminated blue LED light ring on one end, indicating power or active status.

The control panel typically includes:

• Power Button: To turn the speaker on or off.
• Mode Button (M): To switch between Bluetooth, AUX, USB, and SD card modes.
• Volume Up / Next Track Button (+): Short press for next track, long press for volume up.
• Volume Down / Previous Track Button (-): Short press for previous track, long press for volume down.
• Play/Pause Button: To play or pause audio, and to answer/end calls.
• Charging Port: For connecting the USB charging cable.
• AUX Input: For connecting external audio devices via a 3.5mm audio cable.
• USB Port: For playing music from a USB flash drive.
• Micro SD Card Slot: For playing music from a Micro SD card.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. The integrated rechargeable battery has a capacity of 2400 mAh.

1. Connect the supplied USB charging cable to the charging port on the speaker.
2. Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate during charging. It will typically turn off or change color once fully charged.
4. A full charge provides approximately 2.5 hours of playback at maximum volume or up to 6 hours at 50% volume.

2. Powering On/Off

• To Power On: Press and hold the Power Button for a few seconds until you hear an audible prompt or see the indicator light illuminate.
• To Power Off: Press and hold the Power Button again for a few seconds until the indicator light turns off.

3. Bluetooth Pairing

Pair your speaker with a Bluetooth-enabled device (e.g., smartphone, tablet) to stream audio wirelessly.

1. Ensure the speaker is powered on and in Bluetooth mode. If not, press the Mode Button (M) until you hear the Bluetooth pairing prompt. The indicator light will typically flash rapidly.
2. Enable Bluetooth on your mobile device.
3. Search for available Bluetooth devices. You should see "BTV-220GREY" in the list.
4. Select "BTV-220GREY" to connect. Once paired, you will hear a confirmation sound, and the indicator light will stop flashing and remain solid.
5. The speaker will automatically attempt to reconnect to the last paired device when powered on.

Operating Instructions

1. Playing Audio via Bluetooth

• Once paired, open your music player application on your device and start playback.
• Use the Play/Pause Button on the speaker to control playback.
• Short press + for the next track, short press - for the previous track.
• Long press + to increase volume, long press - to decrease volume.

2. Using AUX Input

Connect non-Bluetooth devices using a 3.5mm audio cable (not included).

1. Connect one end of the 3.5mm audio cable to the AUX input port on the speaker.
2. Connect the other end to the headphone jack of your audio device.
3. Press the Mode Button (M) until the speaker enters AUX mode.
4. Control playback and volume directly from your connected audio device.

3. Playing from USB Drive or Micro SD Card

The speaker supports playing audio files directly from a USB flash drive or a Micro SD card.

1. Insert a USB flash drive into the USB port or a Micro SD card into the Micro SD card slot.
2. The speaker will automatically switch to the corresponding mode (USB or SD card) and begin playing audio files. If not, press the Mode Button (M) to select the correct mode.
3. Use the Play/Pause, +, and - buttons on the speaker to control playback and volume.

4. Hands-Free Calling

When connected via Bluetooth to a smartphone, the speaker can be used for hands-free calls.

• Answering a Call: When a call comes in, press the Play/Pause Button once to answer.
• Ending a Call: During a call, press the Play/Pause Button once to end the call.
• Rejecting a Call: Press and hold the Play/Pause Button for a few seconds to reject an incoming call.

5. Light Effects

The speaker features an LED light effect with 3 modes.

• Specific button for light control is not detailed in the provided data, but typically a short press of the Mode button or a dedicated light button cycles through modes or turns them off. Refer to the speaker's physical buttons for a light control icon if available.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
• Water Resistance: This speaker is not waterproof. Avoid exposure to water or moisture.

Troubleshooting

Specifications

Warranty and Support

This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

Image 3: A red and white badge indicating "ONE YEAR WARRANTY GUARANTEED".

For technical support, warranty claims, or further assistance, please contact your retailer or the Denver customer service department. Contact information can typically be found on the Denver website or your purchase documentation.

Return Policy: The standard return policy allows for returns within 30 days for refund or replacement, subject to retailer terms and conditions.