Haoge LH-X200B Square Metal Lens Hood Instruction Manual

Introduction

The Haoge LH-X200B Square Metal Lens Hood is designed to protect the lens of your Fujifilm X100 series camera from stray light, improving image quality by preventing flare and ghosting. It also provides physical protection against accidental impacts and scratches. This accessory set includes a lens hood, an adapter ring, and a metal cap.

This lens hood is compatible with Fujifilm X100VI, X100V, X100F, X100T, and X100S cameras.

Package Contents

• 1 x Haoge LH-X200B Square Metal Lens Hood
• 1 x 49mm Adapter Ring
• 1 x Metal Cap

Image: Package contents showing the lens hood, adapter ring, and metal cap with their respective dimensions.

Setup and Installation

Follow these steps to correctly install the Haoge LH-X200B Square Metal Lens Hood on your Fujifilm X100 series camera.

1. Remove the Camera's Front Ring: Before installation, you must remove the decorative front ring from the top of your Fujifilm X100 series camera lens.
2. Separate Components: The lens hood and adapter ring are typically shipped assembled. Gently separate the adapter ring from the lens hood by unscrewing or pulling them apart.
3. Install Adapter Ring: Screw the adapter ring onto the camera lens. Ensure it is securely fastened.
4. (Optional) Install 49mm UV Filter: If desired, a 49mm UV filter (not included) can be installed onto the front of the adapter ring. Ensure the filter's diameter does not exceed 52mm to avoid interference.
5. Attach Lens Hood: Screw the square lens hood onto the adapter ring. Rotate it until the hood is horizontally aligned with the camera body. It does not need to be screwed completely to the end, just until it is level.

Image: Visual representation of the installation steps for the lens hood.

Operating and Usage

The Haoge LH-X200B lens hood is designed for optimal performance and protection during photography.

• Glare and Flare Reduction: The square design and internal matte coating effectively block stray light and reflections, significantly reducing lens flare and ghosting to improve image contrast and quality.


Image: The lens hood effectively blocks side backlight and glare, enhancing image quality.

• Lens Protection: The robust metal construction provides an additional layer of protection for your camera lens against accidental bumps, drops, and scratches.


Image: The lens hood protects the camera lens from scratches and accidental impact.

• Aesthetic Integration: The classic square design complements the retro style of Fujifilm X100 series cameras.

Image: The lens hood features a European classic square design, enhancing the camera's retro aesthetic.
• Material Quality: Constructed from 6061 T6 lightweight aluminum alloy with CNC precision machining and surface anodic oxidation for durability and a non-glare matte finish.


Image: Details on the internal special matte coating to block stray light and the 6061 T6 lightweight aluminum alloy material.

Maintenance

To ensure the longevity and performance of your Haoge LH-X200B Lens Hood, follow these simple maintenance guidelines:

• Cleaning: Use a soft, lint-free cloth to wipe the exterior of the lens hood. For stubborn smudges, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Storage: When not in use, store the lens hood and cap in a clean, dry place, preferably in a camera bag or protective pouch to prevent scratches and dust accumulation.
• Inspection: Periodically check the adapter ring and lens hood for any signs of wear or damage. Ensure the screw threads are clean and free of debris for smooth attachment.

Troubleshooting

If you encounter any issues with your Haoge LH-X200B Lens Hood, consider the following:

• Lens Hood Appears Crooked: Ensure the lens hood is screwed onto the adapter ring until it is horizontally level with the camera body. It does not need to be overtightened or screwed all the way to the end. Adjust gently until visually straight.
• Lens Cap is Loose: The metal cap is designed to fit snugly. If it feels loose, ensure the lens hood is properly installed and that there is no debris preventing a secure fit.
• Obstruction in Optical Viewfinder (OVF): Due to its design, the square lens hood may partially obstruct the optical viewfinder (OVF) on some Fujifilm X100 series cameras. This is normal. For an unobstructed view, use the electronic viewfinder (EVF) if available on your camera model.
• Shadows with Built-in Flash: Using the camera's built-in flash with the lens hood attached may result in a shadow cast by the hood in your photos. For flash photography, it is recommended to remove the lens hood or use an external flash unit.
• Difficulty Attaching Adapter Ring/Filter: Ensure the camera's original front ring has been completely removed. Check that the adapter ring and any 49mm filter are free of dust or debris that could impede threading.

Specifications

Warranty and Support

Haoge products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the documentation included with your purchase or visit the official Haoge website. Keep your proof of purchase for any warranty claims.