1. Product Overview
This manual provides instructions for the TAMASHII NATIONS S.H.Figuarts Satoru Gojo action figure. This highly articulated figure is designed to replicate dynamic poses and expressions from the Jujutsu Kaisen series.
Figure of Satoru Gojo in his standard attire with a blindfold, posed with one hand raised.
2. Safety Information
WARNING: This product contains small parts which may pose a choking hazard. Not suitable for children under 3 years of age. Recommended for ages 12 years and up.
- Keep out of reach of small children.
- Avoid excessive force when posing or changing parts to prevent breakage.
- Do not expose the figure to extreme temperatures or direct sunlight for prolonged periods, as this may cause discoloration or deformation.
3. What's in the Box
Your S.H.Figuarts Satoru Gojo action figure package includes the following components:
- Main Satoru Gojo Figure Body
- Four (4) Right Optional Hands
- Two (2) Left Optional Hands
- One (1) Optional Hand for Set Pose
- One (1) Optional Expression Part
- One (1) Optional Head Part (un-blindfolded)
- One (1) Blindfold Accessory
4. Setup and Assembly
Carefully remove all components from the packaging. The figure is pre-assembled, but optional parts can be interchanged.
- Changing Hands: Gently pull the existing hand from the wrist joint. Align the peg of the desired optional hand with the hole in the wrist and push firmly until it clicks into place.
- Changing Head/Expression: To change the head or expression, carefully pull the current head part straight up from the neck joint. Align the new head or expression part with the neck peg and push down gently until it is secure.
- Attaching Blindfold: The blindfold accessory can be placed over the figure's eyes on the standard head part.
Satoru Gojo figure with the un-blindfolded head part and hands posed for a technique.
5. Operating and Posing
The S.H.Figuarts line is known for its extensive articulation, allowing for a wide range of dynamic poses. Move joints slowly and deliberately to achieve desired positions.
- Joint Movement: The figure features multiple points of articulation in the neck, shoulders, elbows, wrists, torso, hips, knees, and ankles.
- Dynamic Posing: Utilize the various optional hands and expression parts to recreate iconic scenes and poses from the Jujutsu Kaisen series.
- Stability: For complex or airborne poses, consider using a compatible display stand (sold separately) to ensure stability and prevent falls.
Satoru Gojo figure in a dynamic action pose, demonstrating the figure's articulation.
6. Maintenance and Care
Proper care will ensure the longevity and appearance of your S.H.Figuarts figure.
- Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth can be used, but avoid harsh chemicals or abrasive materials.
- Storage: Store the figure away from direct sunlight, high humidity, and extreme temperatures. Keep it in its original packaging or a display case to protect it from dust and damage.
- Joint Care: If joints become stiff, apply a very small amount of silicone-based lubricant (not oil-based) to the joint. If joints become loose, they may require tightening or replacement parts, which are not typically provided.
7. Troubleshooting
If you encounter any issues with your figure, please refer to the following common solutions:
| Problem | Solution |
|---|---|
| Loose Joints | Carefully inspect the joint. If it's a peg-and-hole connection, ensure it's fully inserted. For ball joints, a thin layer of clear nail polish or super glue (applied and allowed to dry completely before reassembly) can sometimes add friction. |
| Stiff Joints | Gently warm the joint with a hairdryer on a low setting for a few seconds (do not overheat) or immerse in warm water to soften the plastic before attempting to move. |
| Parts Not Fitting | Ensure you are using the correct parts as indicated in the "What's in the Box" section. Check for any molding flash or debris that might obstruct the connection and carefully remove it if present. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1.5 x 4 x 6.7 inches (approx. 6.7 inches tall) |
| Item Weight | 4.6 ounces |
| Model Number | BAS61111 |
| Manufacturer | Bandai |
| Recommended Age | 12 years and up |
| Batteries Required | No (Note: Product data states "1 A batteries required." but this is likely an error for an action figure.) |
Approximate dimensions of the Satoru Gojo figure.
9. Warranty and Product Support
This product is an officially licensed Bandai product. For product support assistance within the United States, please ensure your product box has a Bluefin / Bandai Namco warning label. This label serves as proof of purchase from an authorized U.S. Retailer and entitles you to product support.
For further inquiries or support, please refer to the contact information provided on the Bluefin / Bandai Namco warning label or visit their official website.
