Introduction
Thank you for choosing the Vont LED Headlamp, model VNT-SHL02. This headlamp is designed for durability and versatility, making it suitable for various activities such as running, camping, hiking, fishing, and general use. It features ultra-bright VLEDS, 7 distinct light modes, an ergonomic 45° tilt function, and an IPX5 waterproof rating for reliable performance in diverse conditions.
Setup
1. Unpacking and Initial Inspection
Carefully remove the headlamp from its packaging. Inspect the unit for any visible damage. The package includes two headlamps with pre-installed batteries.
2. Charging the Headlamp
The Vont LED Headlamp is rechargeable via USB Type-C. Before first use, fully charge the headlamp to ensure optimal battery life.
- Locate the USB Type-C charging port on the headlamp.
- Connect the provided USB Type-C cable to the headlamp and a compatible USB power source (e.g., wall adapter, computer USB port).
- An indicator light will show the charging status. Once fully charged, the indicator will change (refer to specific light behavior on the device, typically green or off).
Image: The Vont LED Headlamp featuring its USB Type-C charging port and the stretchable, soft strap for comfort.
3. Adjusting the Headband
The headlamp features an adjustable, stretchable strap for a secure and comfortable fit. Adjust the strap to fit snugly around your head or over a helmet.
Image: A person adjusting the Vont LED Headlamp strap, demonstrating its comfortable and secure fit.
Operating Instructions
The Vont LED Headlamp offers 7 light modes, easily accessible via a single button.
1. Power On/Off and Main Light Modes
- To turn on the main white light: Press the power button once.
- To cycle through main white light modes: With the main light on, press the power button repeatedly to switch between Low, Medium, High, and Strobe modes.
- To turn off the main white light: After cycling through all white light modes, press the button again, or press and hold the button for approximately 3 seconds.
2. Red Light Modes
The headlamp includes two side red lights for preserving night vision or signaling.
- To turn on the red lights: Press and hold the power button for approximately 3 seconds from an off state or while the white light is on.
- To cycle through red light modes: With the red light on, press the power button repeatedly to switch between Low, SOS, and Strobe modes.
- To turn off the red lights: After cycling through all red light modes, press the button again, or press and hold the button for approximately 3 seconds.
Image: Detailed diagram illustrating the single-button control for activating and cycling through the 7 unique light modes, including main white light and side red lights.
Image: A visual guide to the 7 distinct light modes available on the Vont LED Headlamp, showcasing the different brightness levels and flashing patterns for both white and red lights.
3. Tilt Adjustment
The headlamp unit can be tilted up to 45 degrees to direct the light beam precisely where needed, reducing neck strain.
- Gently hold the headlamp body and tilt it to the desired angle.
- The mechanism is designed to hold the chosen angle securely.
Maintenance
1. Cleaning
To clean the headlamp, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the unit.
2. Battery Care
- Recharge the headlamp regularly, especially after prolonged use or if the light appears dim.
- For long-term storage, charge the battery to approximately 50% and store the headlamp in a cool, dry place. Recharge every 3-6 months to maintain battery health.
3. Waterproofing
The Vont LED Headlamp is IPX5 waterproof, meaning it can withstand splashes and light rain. It is not designed for submersion in water.
Image: The Vont LED Headlamp shown with water splashing, highlighting its IPX5 waterproof capability to withstand splashes and downpours.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlamp does not turn on. | Battery is depleted. | Charge the headlamp using the USB Type-C cable. |
| Light is dim or flickers. | Low battery charge. | Recharge the headlamp. |
| Cannot change light modes. | Incorrect button press sequence. | Refer to the "Operating Instructions" section for correct button usage. Ensure a single, quick press for mode changes and a long press for red light activation/deactivation. |
| Headlamp not charging. | Faulty cable or power source; charging port obstruction. | Try a different USB Type-C cable or power adapter. Ensure the charging port is clean and free of debris. |
If troubleshooting steps do not resolve the issue, please contact Vont customer support for assistance.
Specifications
- Model: VNT-SHL02
- Manufacturer: Vont
- Dimensions: 5.72 x 3.48 x 4.27 cm
- Weight: 65.2 g
- White Brightness: 180 Lumens
- Light Source Type: LED
- Power Source: Rechargeable Battery (USB Type-C)
- Waterproof Rating: IPX5
- Material: ABS
- Color: Black
- Special Features: Adjustable Light Modes, Adjustable Strap, Lightweight, Weatherproof, 45° Tilt
Warranty and Support
The Vont LED Headlamp comes with a Lifetime Warranty covering defects. Vont is committed to providing reliable products and offers 24/7 customer support.
For warranty claims, technical assistance, or any inquiries, please visit the official Vont website or contact their customer support team directly. Please retain your proof of purchase for warranty services.
Note: Warranty terms and conditions may apply. Refer to the official Vont website for the most current warranty information.
