Telesin GP-BCG-901
Telesin GP-BCG-901 3-Channel Storage Battery Charger Box
User Instruction Manual
Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Telesin GP-BCG-901 3-Channel Storage Battery Charger Box. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Overview
The Telesin GP-BCG-901 is a versatile accessory designed for GoPro Hero 9 camera batteries. It functions as both a 3-channel battery charger and a protective storage box, capable of holding up to three batteries and two TF (microSD) cards.
Figure 1: Telesin GP-BCG-901 Charger Box and USB Cable.
Key Features:
- 3-Channel Charging: Simultaneously charges up to three GoPro Hero 9 batteries.
- Battery Storage: Securely stores up to three batteries when not in use.
- TF Card Storage: Integrated slots for storing two TF (microSD) cards.
- Rapid Charging: Fully charges batteries within approximately 2.5 hours.
- Smart LED Indicators: Provides real-time charging status (Red: charging, Yellow: near full, Green: fully charged).
- Multi-Protection System: Includes over-current, over-voltage, over-charge, over-discharge, over-temperature, and overpower protection for safe charging.
- Compact and Portable Design: Small size and lightweight for easy transport.
- USB Type-C Interface: Supports convenient power input.
Figure 2: Charger box in closed and open states, showing battery slots.
Setup
- Unpack the Charger: Carefully remove the Telesin GP-BCG-901 charger box and the included USB Type-C charging cable from its packaging.
- Inspect for Damage: Before first use, inspect the charger and cable for any visible signs of damage. Do not use if damaged.
- Prepare Batteries: Ensure your GoPro Hero 9 batteries are clean and free of debris on their contacts.
Operating Instructions
Charging Batteries:
- Connect Power: Connect the included USB Type-C cable to the charger's Type-C port. Connect the other end of the cable to a 5V-2.4A USB power adapter (not included), a computer USB port, or a power bank.
- Insert Batteries: Open the lid of the charger box. Insert up to three GoPro Hero 9 batteries into the designated slots. Ensure the battery contacts align correctly with the charger's pins.
- Monitor Charging Status: Observe the LED indicators on the front of the charger:
- Red Light: Indicates the battery is currently charging.
- Yellow Light: Indicates the battery is nearing full charge.
- Green Light: Indicates the battery is fully charged.
- Remove Batteries: Once the LED indicator turns green for a battery, it is fully charged and can be safely removed.
Figure 3: Charger connected to power source with batteries and TF cards.
Storing Batteries and TF Cards:
The charger box also serves as a convenient storage solution:
- Battery Storage: Place up to three GoPro Hero 9 batteries into the charging slots for secure storage. The lid will protect them from dust and minor impacts.
- TF Card Storage: Two dedicated slots are available inside the lid for storing TF (microSD) cards. Gently push the cards into the slots until they click into place.
Figure 4: Illustration of Type-C interface and fast charging capability.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents. Ensure no dust or debris accumulates in the charging ports or battery slots.
- Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Moisture: Keep the charger away from water and high humidity. This device is not waterproof.
- Handle with Care: Avoid dropping or subjecting the charger to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Batteries not charging (no LED light) | No power supply; loose cable connection; faulty cable/adapter; incorrect battery insertion. | Ensure power adapter is working and connected. Check USB-C cable connection. Try a different USB-C cable or power adapter. Re-insert batteries, ensuring proper alignment. |
| Charging is slow | Low power output from adapter; using a non-standard USB-C cable. | Use a 5V-2.4A (or higher amperage) USB power adapter. Ensure the USB-C cable is of good quality and supports fast charging. |
| LED indicator stuck on Red/Yellow | Battery issue; charger malfunction. | Try charging a different battery. If the issue persists with multiple batteries, contact customer support. |
| Charger feels warm during operation | Normal operation; excessive heat. | A slight warmth is normal during charging. If it becomes excessively hot, disconnect power immediately and contact support. Ensure adequate ventilation. |
Specifications
- Model: GP-BCG-901
- Input: 5V-2.4A
- Output: 4.4V 800mA x 3
- Charging Time: Approximately 2.5 hours (for full charge of all batteries)
- Dimensions: 6.8 x 6.8 x 5 cm (2.68 x 2.68 x 1.97 inches)
- Weight: 69 g (2.43 oz)
- Compatibility: GoPro Hero 9 Batteries
- Certifications: UL, FCC, CE
Warranty and Support
Telesin products are manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Telesin website. Please have your model number (GP-BCG-901) and purchase details ready when contacting support.
Official Website: www.telesin.cn (Example link, actual link may vary)