Poraxy 4-in-1 STEM Kits Instruction Manual

Introduction

This manual provides detailed instructions for assembling and operating the Poraxy 4-in-1 STEM Kits. These kits are designed to engage users in hands-on learning through building an Electronic Coin Bank Box, a Password Lock Case, a Hand-Cranked Music Box, and a Clockwork Piano Music Box. Please read all instructions carefully before beginning assembly.

Safety Information

• Adult supervision is recommended, especially for younger children, due to small parts and electrical components.
• Keep small parts away from children under 3 years old to prevent choking hazards.
• Handle wooden components with care to avoid breakage.
• Ensure batteries are inserted with correct polarity. Do not mix old and new batteries.

Package Contents

Each kit includes pre-cut wooden boards, electronic components (motors, wires, battery holders), screws, and a screwdriver. Specific components vary by model.

Image: Overview of the kit contents, including wooden parts, electronic components, and assembly tools.

Assembly Instructions

Follow the detailed instructions provided with each individual kit. The general steps involve:

1. Identify Components: Separate and identify all wooden pieces and electronic parts for the specific model you are building.
2. Assemble Wooden Structure: Carefully detach wooden pieces from their frames and assemble the main structure according to the diagrams. No glue is typically required as pieces interlock or are secured with screws.
3. Install Electronic Components: Connect wires, motors, and battery holders as indicated in the instructions. Pay close attention to polarity when installing batteries.
4. Secure with Screws: Use the provided screwdriver to secure components. Note that screw lengths may vary; refer to the specific kit's instructions for guidance.
5. Test Functionality: After assembly, test the model to ensure all functions operate correctly.

Specific Model Assembly Notes:

1. Electronic Coin Bank Box (Robot)

This kit involves assembling a robot-shaped bank that "eats" coins. Ensure all wiring for the motor and coin detection mechanism is correctly connected.

Image: A coin being inserted into the Electronic Coin Bank Box, demonstrating its function.

Tip: The metal rods for arm joints can be tight; gentle, firm pressure is needed. Verify the arms move freely after assembly.

2. Password Lock Case

Assemble the wooden box and integrate the mechanical password lock mechanism. Follow the instructions carefully to ensure the lock functions correctly.

Image: A child interacting with the assembled Password Lock Case, which features a three-digit combination lock.

Setting the Password: The initial password is typically 000. Refer to the specific kit's instructions for changing the password. It is crucial to remember your new password.

3. Hand-Cranked Music Box

This kit involves assembling a small wooden box and integrating a hand-cranked music mechanism. Ensure the mechanism is securely mounted and the crank operates smoothly.

Image: The Hand-Cranked Music Box, highlighting its internal mechanism and the external crank.

Operation: Turn the hand crank to play the melody. Avoid over-winding or forcing the mechanism.

4. Clockwork Piano Music Box

Assemble the miniature piano structure and install the clockwork music mechanism. Ensure the winding key is accessible and functions correctly.

Image: The Clockwork Piano Music Box, illustrating its winding key and musical notes.

Operation: Wind the clockwork mechanism using the key. The music will play as the mechanism unwinds. Do not over-wind.

Operating Instructions

• Electronic Coin Bank Box: Insert coins into the designated slot. The robot's arms will activate to "eat" the coin.
• Password Lock Case: Enter the correct three-digit password to unlock the case. Ensure the dials align precisely.
• Hand-Cranked Music Box: Turn the handle clockwise to play the melody. Release the handle to stop.
• Clockwork Piano Music Box: Gently wind the key clockwise until resistance is felt. Do not force. The music will play automatically.

Maintenance

• Cleaning: Wipe wooden surfaces with a dry, soft cloth. Avoid using water or cleaning solutions.
• Storage: Store the assembled models in a dry place away from direct sunlight and extreme temperatures to prevent warping or damage to electronic components.
• Battery Replacement: If electronic functions cease, replace batteries in the respective battery holders. Ensure correct polarity.
• Component Care: Avoid excessive force on moving parts, especially the music box mechanisms and robot arms, to prevent breakage.

Troubleshooting

Specifications

• Model Number: PODIY003
• Package Dimensions: 8.7 x 6.57 x 2.83 inches
• Item Weight: 1.33 pounds
• Manufacturer Recommended Age: 6 - 14 years
• Material: Pre-cut wooden boards, various electronic components

Contact and Support

For further assistance, questions, or to report missing/damaged parts, please contact Poraxy customer support through the retailer where the product was purchased.