Roca Aquaria Toilet Seat (Model A801250004) Instruction Manual

1. Product Overview

The Roca Aquaria Toilet Seat, Model A801250004, is a genuine replacement part designed for compatibility with Roca toilets. It features a durable white lacquered finish and includes stainless steel hinges for reliable performance. The round shape is engineered for easy installation and removal, facilitating cleaning and maintenance.

An image showing the Roca Aquaria toilet seat and lid in white. The lid is partially open, revealing the round shape of the seat. The design emphasizes its smooth, lacquered finish and the integrated stainless steel hinges.

2. Package Contents

Please verify that all components are present before beginning installation:

• Roca Aquaria Toilet Seat
• Toilet Seat Lid
• Stainless Steel Hinges (pre-attached or separate, depending on packaging)
• Mounting Hardware (bolts, washers, nuts)

3. Safety Information

• Always handle tools with care during installation.
• Do not overtighten mounting hardware, as this may damage the toilet bowl or seat.
• Keep small parts away from children to prevent choking hazards.
• Ensure the toilet seat is securely fastened before use to prevent injury.

4. Setup and Installation

This section outlines the general steps for installing your Roca Aquaria Toilet Seat. Specific toilet models may vary slightly.

Tools Required:

• Adjustable Wrench or Screwdriver (depending on bolt type)
• Soft Cloth

Installation Steps:

1. Remove Old Toilet Seat: If replacing an existing seat, lift the hinge covers at the back of the seat. Unscrew the bolts that secure the seat to the toilet bowl. Remove the old seat and clean the area thoroughly.
2. Position New Seat: Place the new Roca Aquaria toilet seat onto the toilet bowl, aligning the hinge posts with the mounting holes on the bowl.
3. Insert Mounting Hardware: From the top, insert the bolts through the hinge posts and the mounting holes on the toilet bowl.
4. Secure Bolts: From underneath the toilet bowl, attach the washers and nuts to the bolts. Hand-tighten them initially.
5. Adjust and Tighten: Adjust the seat position to ensure it is centered and aligned with the bowl. Once satisfied, use an adjustable wrench or screwdriver to firmly tighten the nuts. Do not overtighten.
6. Attach Hinge Covers: Snap the hinge covers back into place over the mounting hardware.
7. Test Stability: Gently press down on the seat to ensure it is stable and does not wobble.

5. Operating Instructions

The Roca Aquaria Toilet Seat operates like a standard toilet seat. Simply lift the lid and seat to use the toilet, and lower them gently when finished. The stainless steel hinges are designed for smooth movement.

6. Maintenance and Cleaning

Proper care will extend the life and maintain the appearance of your toilet seat.

• Regular Cleaning: Clean the toilet seat regularly with a soft cloth, warm water, and a mild, non-abrasive soap.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, strong acids, alkalis, or organic solvents, as these can damage the lacquered finish and hinges.
• Drying: After cleaning, wipe the seat dry with a soft, clean cloth to prevent water spots.
• Hinge Care: Periodically check the hinge screws for tightness and re-tighten if necessary to prevent wobbling.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• Seat is Loose/Wobbles: Check the mounting nuts underneath the toilet bowl. Tighten them securely with a wrench or screwdriver.
• Seat Does Not Align Properly: Loosen the mounting nuts slightly, adjust the seat position until it is centered, then re-tighten the nuts.
• Squeaking Hinges: A small amount of silicone-based lubricant can be applied to the hinge pins if they become noisy. Avoid oil-based lubricants.

8. Specifications

9. Warranty and Support

For information regarding warranty coverage or technical support, please refer to the official Roca website or contact Roca customer service directly. Keep your purchase receipt as proof of purchase.

Roca Official Website: www.roca.com