Introduction
Thank you for choosing the WOLTU Adjustable Swivel Bar Stools. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
Image: Two WOLTU adjustable swivel bar stools in a kitchen environment.
Safety Instructions
- Weight Limit: Do not exceed the maximum weight capacity of 100 kg (220 lbs) per stool.
- Assembly: Ensure all parts are correctly assembled and tightened before use. Periodically check all fasteners for tightness.
- Stability: Always use the stool on a flat, stable surface. Avoid standing on the stool.
- Children: Keep children away from the assembly area. Small parts can be a choking hazard. Supervise children when they are using the stools.
- Movement: Do not move the stool while someone is seated on it.
- Gas Lift: The gas lift mechanism contains pressurized gas. Do not attempt to disassemble or puncture it. Only qualified personnel should service the gas lift.
- Floor Protection: The base includes a rubber ring to protect floors. Ensure it is properly seated before use.
Package Contents
Please check that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact WOLTU customer support.
- Seat (2x)
- Gas Lift Cylinder (2x)
- Footrest (2x)
- Base (2x)
- Base Cover (2x)
- Screws and Allen Key (for seat attachment)
- Instruction Manual (1x)
Image: Exploded view of bar stool components.
Assembly Instructions
Follow these steps to assemble your WOLTU bar stools. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Step 1: Prepare the Base. Remove the protective cap from the top of the gas lift cylinder. Insert the gas lift cylinder into the center hole of the base. Place the base cover over the gas lift cylinder.
Image: Assembly of the base and gas lift.
- Step 2: Attach the Footrest. Slide the footrest over the gas lift cylinder, ensuring it rests securely on the designated groove.
Image: Attaching the footrest.
- Step 3: Secure the Seat. Align the mounting plate on the underside of the seat with the top of the gas lift cylinder. Press down firmly to secure the seat onto the gas lift. Ensure the seat is fully engaged and stable.
Image: Securing the seat to the gas lift.
- Step 4: Test Stability. Once assembled, gently test the stool's stability before full use. Repeat for the second stool.
Operating Instructions
Adjusting Seat Height
Your WOLTU bar stool features an adjustable gas lift mechanism for customized seating height.
- To Raise: While standing, pull the lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- To Lower: While seated, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.
Image: Height adjustment lever.
Swivel Function
The seat of your bar stool can rotate 360 degrees. Simply turn the seat to face your desired direction.
Care and Maintenance
- Cleaning the Velvet Seat:
- For light dust, use a soft brush or vacuum cleaner with an upholstery attachment.
- For spills, blot immediately with a clean, dry cloth. Do not rub.
- For stubborn stains, use a mild upholstery cleaner according to the product instructions. Test on an inconspicuous area first.
- Avoid harsh chemicals or abrasive cleaners.
- Cleaning the Metal Parts: Wipe metal surfaces with a soft, damp cloth. Dry immediately to prevent water spots or rust.
- Regular Checks: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Floor Protection: Ensure the rubber ring on the base is clean and free of debris to maintain floor protection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool is wobbly. | Loose fasteners. Uneven floor. | Check and tighten all screws and bolts. Move the stool to a flat surface. |
| Seat does not adjust height. | Gas lift protective cap not removed. Gas lift malfunction. | Ensure the black protective cap on the gas lift cylinder is removed during assembly. If the issue persists, contact customer support. |
| Squeaking noise during swivel. | Lack of lubrication. | Apply a small amount of silicone-based lubricant to the swivel mechanism (avoiding the gas lift cylinder). |
| Scratches on floor. | Rubber ring on base is damaged or missing. Debris under base. | Check the rubber ring for damage and replace if necessary. Clean any debris from under the base. |
Specifications
| Feature | Detail |
|---|---|
| Brand | WOLTU |
| Model Number | B08LMHVYSL |
| Color | Black |
| Material | Velvet seat, Metal frame |
| Overall Height | Approx. 82.5 - 104 cm (32.5 - 40.9 inches) |
| Adjustable Seat Height | Approx. 59.5 - 81 cm (23.4 - 31.9 inches) |
| Seat Dimensions (W x D) | Approx. 42.5 x 35 cm (16.7 x 13.8 inches) |
| Backrest Height | Approx. 23.5 cm (9.3 inches) |
| Base Diameter | Approx. 38.5 cm (15.2 inches) |
| Weight Capacity | Max. 100 kg (220 lbs) |
| Features | Adjustable height, 360° swivel, Ergonomic backrest, Footrest, Floor protection ring |
| Item Weight (each) | 6.5 kg (14.3 lbs) |
Image: Bar stool dimensions diagram.
Warranty and Support
WOLTU products are designed for quality and durability. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical assistance, missing parts, or any questions regarding your WOLTU bar stools, please contact WOLTU customer support through the retailer where you purchased the product or visit the official WOLTU website.
Online Support: Visit the WOLTU Store on Amazon