Reverie R400 Adjustable Power Bed Base User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Reverie R400 Electric Bluetooth Fabric Adjustable Power Bed Base. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Safety Information

Important Safety Instructions:

• Assembly is required. Follow all assembly instructions carefully.
• Keep all electrical cords away from heat sources, water, and sharp objects to prevent damage and electrical hazards.
• Do not operate the massaging function or use the remote control while sleeping.
• Keep the remote control out of reach of children to prevent unintended operation.
• Ensure the power cord is securely plugged into a grounded electrical outlet.
• Avoid placing heavy objects on the adjustable base, especially when in motion.
• Do not allow children or pets to play on or under the adjustable base.

Package Contents

Verify that all components are present before beginning assembly:

• Reverie R400 Adjustable Power Bed Base Frame
• Legs (quantity may vary by size)
• Wireless Remote Control
• Power Supply and Cord
• Mattress Retainer Bar
• User Manual (this document)

Setup and Assembly

The Reverie R400 adjustable base requires user assembly. Follow these steps carefully:

1. Unpack Components: Carefully remove all items from the packaging. Place the base frame upside down on a clean, flat surface to access the leg attachment points.
2. Attach Legs: Screw each leg clockwise into the threaded receptacles on the underside of the base. Ensure all legs are tightened securely.
3. Attach Mattress Retainer Bar: Locate the retainer bar and insert its ends into the designated holes at the foot of the base.
4. Position the Base: With assistance, carefully flip the base over and place it in its desired location.
5. Connect Power: Plug the power cord into the power supply, then connect the power supply to the base. Finally, plug the power cord into a grounded electrical outlet.
6. Remote Control Pairing (if not pre-paired): Refer to the 'Operating Instructions' section for remote control pairing procedures if the remote does not immediately control the base.

Operating Instructions

Your Reverie R400 adjustable base is controlled by a wireless remote. Ensure the remote has fresh batteries and is paired with the base.

Wireless Remote Control Overview

• HEAD LIFT (+/-): Press '+' to raise the head section; press '-' to lower it.
• FOOT LIFT (+/-): Press '+' to raise the foot section; press '-' to lower it.
• FLAT: Press to return both head and foot sections to a flat position.
• ANTI-SNORE: Press for a preset position designed to reduce snoring.
• MASSAGE HEAD (+/-): Press '+' to increase head massage intensity; press '-' to decrease.
• MASSAGE FOOT (+/-): Press '+' to increase foot massage intensity; press '-' to decrease.
• FULL BODY MASSAGE: Activates or deactivates full body massage.
• MASSAGE STOP: Stops all massage functions.
• PRESET BUTTONS (1, 2, 3): These buttons may be pre-programmed or programmable for your favorite positions. Consult the full manual for programming instructions if needed.

Adjusting Positions

Use the HEAD LIFT and FOOT LIFT buttons to find your desired comfort position. The base will smoothly adjust to the selected angle.

Massage Functions

Activate the massage feature using the dedicated massage buttons on the remote. Adjust intensity for head and foot zones independently or select full body massage. Press 'STOP' to end the massage.

Bluetooth Connectivity

The Reverie R400 features Bluetooth connectivity, allowing control via a compatible mobile application. Refer to the Reverie website or app store for the official application and pairing instructions.

Maintenance and Care

To ensure the longevity and proper function of your Reverie R400 adjustable base, follow these care guidelines:

• Cleaning: Wipe the fabric and frame surfaces with a dry cloth. Avoid using liquid cleaners or abrasive materials that could damage the finish or electrical components.
• Inspections: Periodically check all connections, including the power cord and leg attachments, to ensure they are secure.
• Motor Care: The motors are designed for maintenance-free operation. Do not attempt to lubricate or open the motor housing.

Troubleshooting

If you experience issues with your Reverie R400 adjustable base, consult the following common troubleshooting steps:

• No Power/Base Not Responding:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check that the power supply is properly connected to the base.
  • Verify that the remote control batteries are fresh and correctly inserted.
  • If the remote is not paired, follow the pairing instructions (usually involves pressing a button on the control box under the base and then a button on the remote).
• Motor Noise:
  • Some motor noise during adjustment is normal. Excessive or unusual noise may indicate an issue.
  • Check for any obstructions under the base that might be interfering with the moving parts.
• Base Not Adjusting Evenly:
  • Ensure no objects are impeding the movement of the head or foot sections.
  • Check that the base is on a level surface.

If these steps do not resolve the issue, please contact Reverie customer support.

Specifications

Warranty and Support

For specific warranty details, please refer to the warranty card included with your product or visit the official Reverie website. For technical support, replacement parts, or further assistance, please contact Reverie customer service through their official channels.