REPTI ZOO 50 Gallon Reptile Terrarium (Model RK0119) - Instruction Manual

Introduction

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your REPTI ZOO 50 Gallon Reptile Terrarium, Model RK0119. This high-quality glass enclosure is designed to provide a secure and comfortable habitat for various reptiles and amphibians, featuring versatile ventilation options and easy access.

Figure 1: Fully assembled REPTI ZOO 50 Gallon Reptile Terrarium with internal decor.

Safety Guidelines

• All glass panels are made of tempered glass. Do NOT attempt to cut or drill holes into the glass, as this will cause damage and void the warranty.
• Handle all glass components with care to prevent breakage and injury. It is recommended to wear protective gloves during assembly.
• Ensure the terrarium is placed on a stable, level surface capable of supporting its full weight when filled with substrate, water, and decor.
• Keep the terrarium away from direct sunlight or extreme temperature fluctuations to maintain a stable environment for your pet.
• Always secure the locking mechanisms to prevent accidental escapes.

Setup and Assembly

Follow these steps carefully to assemble your REPTI ZOO terrarium. An assembly video is provided for visual guidance.

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the parts diagram are present and undamaged.


Figure 2: All terrarium components unpacked and ready for assembly.

2. Install Metal Poles: Insert the four metal support poles into the designated slots on the terrarium base. Ensure they are rotated tightly for stability.


Figure 3: Installation of the metal support poles into the base.

3. Install Back Supports and Front Doors: Carefully slide the two back support panels and the two front glass doors into their respective channels.


Figure 4: Front doors installed and open for access.

4. Install Side Panels (Mesh or Glass): Choose between the metal mesh panels for increased ventilation or the glass panels for higher humidity retention. Slide them into the side slots.


Figure 5: Demonstrating the 2-in-1 side mesh and glass panel options.

5. Install Cable Pass: Insert the cable pass component into the designated circular opening on the side panel. This allows for neat routing of wires and tubing.


Figure 6: Detail of the closable cable pass for equipment wires.

6. Secure Top Frame: Place the top frame onto the assembled structure. Secure it using the provided metal screws and rubber caps.
7. Install Door Lock: Attach the door lock mechanism to the front doors as shown in the video to ensure secure closure and prevent escapes.


Figure 7: The door lock in place, securing the front doors.

Operating Your Terrarium

• Front Doors: The double hinge front doors can be opened separately for easy feeding, cleaning, and maintenance. Always ensure they are securely closed and locked after access.
• Ventilation: The terrarium features window ventilation on the left, right, and top. The 2-in-1 side panels allow you to switch between metal mesh for increased airflow and glass for higher humidity, adapting to your reptile's specific needs.
• Cable Inlets: Utilize the closable inlets for wires and tubing to safely route heating elements, lighting, and other equipment while maintaining enclosure integrity.
• Waterproof Bottom: The raised bottom frame is designed to accommodate a substrate heater. The waterproof bottom allows the tank to be used for both desert and rainforest setups, supporting a maximum water height of 2.3 inches.


Figure 8: Indication of the maximum water level for aquatic setups.

Maintenance

• Cleaning: Glass terrariums are hygienic and easy to clean. Use reptile-safe cleaning solutions and a soft cloth to wipe down surfaces regularly. Avoid abrasive cleaners that could scratch the glass or harm your pet.
• Substrate Replacement: Follow guidelines specific to your reptile's needs for regular substrate replacement to maintain a clean and healthy environment.
• Ventilation Maintenance: Periodically check the mesh panels and ventilation openings for any blockages and clean as necessary to ensure proper airflow.

Troubleshooting

• Damaged Parts: In the event of damaged parts upon receipt, please contact REPTI ZOO customer service for a replacement service. Do not attempt to use damaged components.
• Difficulty Assembling: Refer to the assembly video and step-by-step instructions. Ensure all parts are correctly oriented and tightened.
• Door Not Closing Securely: Check that the glass panels are properly seated in their channels and that the locking mechanism is correctly installed and engaged.

Specifications

Figure 9: Terrarium dimensions for Model RK0119.

Warranty and Customer Support

REPTI ZOO is committed to providing high-quality products. For any questions, concerns, or assistance with damaged parts, please contact REPTI ZOO customer support. Refer to your purchase documentation for specific warranty details and contact information.