ELEKICO 8FT LED Bulbs Instruction Manual

1. Introduction

Thank you for choosing ELEKICO 8FT LED Bulbs. These super bright, energy-efficient LED tube lights are designed to replace traditional fluorescent light bulbs in T8, T10, and T12 fixtures. With a high lumen output and long lifespan, they provide superior illumination while significantly reducing electricity consumption.

This manual provides essential information for the safe and proper installation, operation, and maintenance of your new LED bulbs.

Image: A pack of six 8-foot ELEKICO LED bulbs, showcasing their length and single-pin FA8 base.

Image: Examples of ELEKICO 8FT LED bulbs installed in different indoor environments such as garages and workshops, demonstrating their bright and even light distribution.

2. Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always turn off power at the circuit breaker before installing or servicing the bulbs.
• These bulbs are designed for indoor use only.
• Do not use with dimmers unless explicitly stated as compatible. These bulbs are not dimmable.
• Ensure the fixture is compatible with FA8 single-pin LED tubes.
• Handle bulbs with care to avoid breakage.
• If you are unsure about any part of the installation process, consult a qualified electrician.
• Keep out of reach of children.

3. Product Components and Features

Each ELEKICO 8FT LED bulb features a robust design for optimal performance and longevity.

• FA8 Single Pin Base: Designed for easy replacement in existing fluorescent fixtures.
• Dual Row LED Design: Provides wider light distribution and improved heat dissipation.
• Aluminum Body: Enhances durability and heat management.
• Clear Cover: Maximizes light output and brightness.

Image: A detailed view of the ELEKICO LED bulb, highlighting the individual LED chips, the FA8 single pin connector, and the aluminum housing for heat dissipation.

4. Specifications

Key technical specifications for the ELEKICO 8FT LED Bulbs:

Image: A visual representation of the product parameters, including brand, wattage, voltage, brightness, color temperature, and material.

5. Setup and Installation

These ELEKICO LED bulbs are designed for easy installation with a ballast bypass method. This means the existing ballast in your fluorescent fixture must be removed or bypassed.

Installation Steps (Ballast Bypass):

1. Turn Off Power: Before starting, ensure the power to the fixture is completely OFF at the circuit breaker. This is crucial for safety.
2. Remove Old Fluorescent Tubes: Carefully remove the existing fluorescent tubes from the fixture.
3. Bypass/Remove Ballast:
   • Locate the ballast inside the fixture.
   • Cut the wires leading to and from the ballast.
   • Connect the live (L) wire from the power source directly to one end of the fixture's tombstone (socket).
   • Connect the neutral (N) wire from the power source directly to the other end of the fixture's tombstone.
   • Ensure all connections are secure using wire nuts or appropriate connectors.
   • Remove the old starter if your fixture has one.
4. Install LED Bulbs: Insert the FA8 single-pin LED bulbs into the modified fixture's tombstones.
5. Restore Power: Turn the power back ON at the circuit breaker.

Special Note: Please remove the starter and ballast before installation. These LED tubes are direct wire and do not require a ballast.

Image: A clear diagram illustrating the ballast bypass wiring for installing the LED tube lights, showing how to connect live (L) and neutral (N) wires directly to the bulb sockets after removing the inductive or electronic ballast.

6. Operating Instructions

Once properly installed, operating your ELEKICO LED bulbs is straightforward:

• Simply use the existing wall switch connected to your fixture to turn the lights ON or OFF.
• These LED bulbs provide instant-on illumination without flickering or warm-up time.

7. Maintenance

ELEKICO LED bulbs require minimal maintenance due to their long lifespan and durable construction.

• Cleaning: Ensure the power is OFF before cleaning. Gently wipe the bulbs with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Replacement: Due to their extended lifespan (up to 50,000 hours), frequent replacement is not necessary. If a bulb needs replacement, follow the installation steps in Section 5.

8. Troubleshooting

If you encounter issues with your ELEKICO LED bulbs, consider the following common troubleshooting steps:

• Bulb Not Lighting Up:
  • Check if the power is ON at the circuit breaker and wall switch.
  • Verify that the ballast has been completely bypassed or removed as per installation instructions. These bulbs require direct wiring.
  • Ensure the bulb is securely seated in the fixture's tombstones.
  • Inspect wiring connections for looseness or damage.
• Flickering:
  • Flickering is often caused by an incompatible or improperly bypassed ballast. Double-check your wiring to ensure the ballast is completely out of the circuit.
  • Ensure the voltage supplied to the fixture is within the bulb's specified range (AC100-277V).
• Reduced Brightness:
  • Ensure the bulbs are clean and free of dust.
  • Verify that the correct wattage bulbs are installed for your lighting needs.

If these steps do not resolve the issue, please contact ELEKICO customer support for further assistance.

9. Warranty and Support

ELEKICO stands behind the quality of its products.

• Return Policy: This product is eligible for a 30-day refund/replacement policy from the date of purchase.
• Manufacturer Warranty: While specific warranty duration is not detailed here, ELEKICO products are generally designed for long-term reliability. For detailed warranty information or to claim warranty service, please refer to the official ELEKICO website or contact their customer support directly.
• Customer Support: For any questions, technical assistance, or support needs, please visit the official ELEKICO store on Amazon or contact their customer service team.

Manufacturer: ELEKICO

For more information, visit the ELEKICO Store on Amazon.