Introduction
The eufy Security Certified eufyCam Solar Panel provides a continuous power supply to your compatible eufyCam devices, ensuring uninterrupted operation. Designed for outdoor use, this 2.6W high-efficiency solar panel is IP65 weatherproof, making it resilient against various environmental conditions. This manual provides essential information for setup, operation, and maintenance of your solar panel.
What's Included
- 1x Solar Panel
- 1x 13ft (4m) Long Charging Cable
- 1x 360-Degree Mounting Bracket
- 1x Set of Installation Screws & Wall Anchors
- 4x Camera Adapters
- 1x Quick Start Guide
Key Features
- Universal Compatibility: Provides continuous charging for eufyCam, eufyCam E, eufyCam 2, eufyCam 2 Pro, eufyCam 2C, eufyCam 2C Pro, SoloCam (E20/E40/L20/L40/S40), and 4G LTE Starlight Camera.
- Solar-Powered Continuous Charging: 2.6W high-efficiency solar panel ensures your camera stays charged around the clock with just a few hours of direct sunlight daily.
- Easy Installation: Features a 13ft (4m) cable for flexible placement and a 360-degree mounting bracket with included wall anchors and screws for straightforward setup.
- Certified Safety: Only certified eufy Security solar panels are designed to sync with eufyCam for correct power management, preventing potential battery damage from non-certified alternatives.
- Weatherproof Design: IP65 weatherproof rating ensures durability and reliable performance in extreme weather conditions.
Setup and Installation
Follow these steps to properly install your eufyCam Solar Panel:
- Choose a Location: Select a location that receives several hours of direct sunlight daily for optimal charging. The 13ft (4m) cable provides flexibility for placement.
- Mount the Bracket: Use the included installation screws and wall anchors to securely attach the 360-degree mounting bracket to your chosen surface.
- Attach the Solar Panel: Secure the solar panel to the mounting bracket. Adjust the panel's angle to maximize sun exposure.
- Connect to eufyCam: Select the appropriate camera adapter from the four provided and connect the charging cable to your eufyCam. Ensure a secure, weather-resistant fit.
- Cable Management: Utilize the wire management feature on the back of the solar panel to neatly wrap any excess cable, ensuring a clean installation.
- Configure in App: Open the eufy Security app and change the charging method for the connected camera to "solar panel" to ensure correct power management.
Operation
Once installed and connected, the eufyCam Solar Panel will automatically begin charging your compatible eufyCam device. The 2.6W high-efficiency monocrystalline silicon panel is designed to convert sunlight into electrical energy, providing a continuous trickle charge to maintain your camera's battery level. With adequate daily sunlight exposure, your camera can remain charged around the clock, eliminating the need for manual recharging.
Maintenance
The eufyCam Solar Panel is designed for minimal maintenance due to its durable construction and IP65 weatherproof rating. To ensure optimal performance:
- Cleaning: Periodically wipe the surface of the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may accumulate and reduce efficiency. Avoid abrasive cleaners.
- Obstruction Check: Ensure no objects (e.g., tree branches, leaves, snow) are blocking the solar panel's surface, as this will hinder sunlight absorption.
- Cable Inspection: Occasionally check the charging cable and connections for any signs of wear or damage. Ensure the weather-resistant seal at the camera connection remains intact.
Troubleshooting
If your eufyCam is not charging as expected with the solar panel, consider the following:
- Insufficient Sunlight: Ensure the solar panel receives direct sunlight for several hours daily. Relocate the panel if necessary to a less shaded area.
- Panel Obstruction: Check for any dirt, dust, leaves, or other obstructions on the panel's surface and clean it as described in the Maintenance section.
- Incorrect Connection: Verify that the charging cable is securely connected to both the solar panel and the eufyCam, and that the correct camera adapter is used.
- App Configuration: Confirm that the charging method for your camera is correctly set to "solar panel" within the eufy Security app.
- Non-Certified Panel Warning: Be aware that using non-certified solar panels may damage the eufyCam battery. Ensure you are using an official eufy Security solar panel.
- Extreme Weather: While IP65 weatherproof, prolonged periods of heavy cloud cover or extreme cold may temporarily reduce charging efficiency.
Specifications
| Attribute | Value |
|---|---|
| Brand | eufy Security |
| Model Number | T8700021 |
| Material | Monocrystalline Silicon |
| Product Dimensions | 7.32"L x 4.56"W x 1"H |
| Item Weight | 0.69 Pounds (11 ounces) |
| Efficiency | High Efficiency |
| Connector Type | Micro USB |
| Included Components | Solar Panel |
| Maximum Power | 2.6 Watts |
| IP Rating | IP65 Weatherproof |
| Cable Length | 13ft (4m) |
Warranty and Support
For detailed warranty information and customer support, please refer to the full product manual included in your package or visit the official eufy Security website. You can also find FAQs and contact information for technical assistance there.
