Introduction
This instruction manual provides essential information for the proper use and care of your ReadyWired Power Supply Cord. This cord is specifically designed to provide power to the Blackweb BWD19AAS11 Party Speaker. Please read this manual thoroughly before use to ensure optimal performance and safety.
Product Overview
The ReadyWired Power Supply Cord is a replacement or spare power cable for compatible devices. It features a standard two-prong Type A plug for wall outlets and a C7 (figure-8) connector for the device. The cable is 6 feet in length and includes foil and braid shielding to reduce electromagnetic interference (EMI) and radio-frequency interference (RFI).
Image: The ReadyWired Power Supply Cord, featuring a standard two-prong wall plug and a two-hole C7 connector, with the black cable neatly coiled.
Setup Instructions
- Identify the Power Port: Locate the power input port on your Blackweb BWD19AAS11 Party Speaker. This port is typically a two-hole, figure-8 shape.
- Connect to Speaker: Insert the C7 (figure-8) connector end of the ReadyWired Power Supply Cord firmly into the power input port of the Blackweb BWD19AAS11 Party Speaker. Ensure a snug fit.
- Connect to Power Outlet: Plug the two-prong Type A end of the power cord into a standard 120V AC wall outlet. Ensure the outlet is functional and provides stable power.
- Verify Connection: Once both ends are connected, the speaker is ready to receive power. Turn on your speaker using its power button.
Operating Instructions
The ReadyWired Power Supply Cord functions as a direct power conduit for your Blackweb BWD19AAS11 Party Speaker. Once properly connected to both the speaker and a power outlet, the cord continuously supplies electrical power to the speaker, allowing it to operate. There are no specific operational controls on the cord itself.
Maintenance
- Cleaning: To clean the power cord, disconnect it from both the speaker and the wall outlet. Wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling or bending the cable sharply, as this can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or bent prongs. If any damage is observed, discontinue use immediately and replace the cord.
- Handling: Always grasp the plug when connecting or disconnecting the cord from an outlet or device. Do not pull on the cable itself.
Troubleshooting
If your Blackweb BWD19AAS11 Party Speaker does not power on after connecting the ReadyWired Power Supply Cord, consider the following:
- Check Connections: Ensure both ends of the power cord are securely and fully inserted into the speaker and the wall outlet.
- Test Outlet: Plug another working appliance into the same wall outlet to confirm the outlet is receiving power. If the outlet is not working, try a different one.
- Inspect Cord for Damage: Visually inspect the entire length of the power cord for any visible damage such as cuts, kinks, or exposed wires. If damaged, the cord must be replaced.
- Speaker Power Button: Ensure the power button on your Blackweb BWD19AAS11 Party Speaker is pressed or switched to the 'ON' position.
If the issue persists after performing these checks, consult the instruction manual for your Blackweb BWD19AAS11 Party Speaker or contact the speaker manufacturer for further assistance.
Specifications
| Brand | ReadyWired |
| Compatibility | Blackweb BWD19AAS11 Party Speaker Large |
| Length | 6 Feet (1.83 meters) |
| Color | Black |
| Connector Type (Wall) | Type A (2-prong) |
| Connector Type (Device) | C7 (Figure-8) |
| Voltage | 125 Volts (AC) |
| Shielding | Foil and Braid |
| Item Weight | 2.08 ounces |
| Package Dimensions | 6.81 x 6.42 x 0.63 inches |
Warranty Information
This ReadyWired Power Supply Cord comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures compatibility as specified. For warranty claims or further details, please refer to the seller's return and warranty policy or contact ReadyWired customer service.
Support
For technical assistance, troubleshooting beyond the scope of this manual, or inquiries regarding your ReadyWired Power Supply Cord, please contact the retailer or ReadyWired customer support. When contacting support, please have your product model (BWD19AAS11) and purchase information readily available.