1. Safety Information
Please read and understand all safety information before operating this device. Failure to follow these instructions may result in injury or damage to the device.
- This product is a Class IIA laser product with less than 1mW power output.
- Do not stare directly into the laser beam. Direct exposure to the laser beam may cause eye damage.
- Do not disassemble the device. Repairs should only be performed by qualified personnel.
- Keep the device out of reach of children.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
2. Product Overview and Features
The HISS 2-in-1 Laser Tape Measure combines the precision of a laser distance meter with the convenience of a traditional tape measure, offering versatile measurement solutions for various tasks.
Figure 2.1: Key features of the HISS Laser Tape Measure.
- Dual Measurement Capability: Features a 16 ft (5m) physical tape measure and a 196 ft (60m) laser distance meter.
- High Accuracy: Laser measurement is accurate up to ±1/8 inch.
- Digital LCD Display: Clear, backlit display for easy reading of laser measurements in any environment.
- Unit Conversion: Seamlessly switch between various units including feet-inch, inch (1/16th), inch decimal, feet decimal, and meter.
- Movable Magnetic Hook: The tape measure features a strong magnetic hook for secure attachment to metallic surfaces, aiding in single-handed measurements.
- Durable Construction: Built with a robust internal structure and a nylon-coated exterior for enhanced durability and a comfortable grip.
- Compact Design: Small dimensions allow for easy portability and storage in a pocket or toolkit.
Video 2.1: Overview of the 2-in-1 Laser Tape Measure's features and range.
3. Getting Started
3.1 Battery Installation
The device requires 2 AAA batteries (included). Use the provided mini screwdriver to open the battery compartment located at the rear of the unit. Insert the batteries according to the polarity markings (+/-), then close the compartment and secure it with the screw.
3.2 Power On/Off
- To power on the device, press the READ button once. The LCD display will illuminate.
- The device features an auto-shutdown function after 150 seconds of inactivity to conserve battery life.
- To manually power off, press and hold the READ and UNIT buttons simultaneously for a few seconds.
4. Operating Instructions
4.1 Using the Tape Measure
The physical tape measure extends up to 16 feet (5 meters). It features both US customary (feet, inches) and metric (centimeters) markings for convenience. The tape has an automatic locking mechanism; simply pull it out to the desired length, and it will stay in place. To retract, press the button on the front of the unit.
Figure 4.1: Practical application of the HISS Laser Tape Measure.
4.2 Using the Laser Measure
The laser measure provides quick and accurate distance readings up to 196 feet (60 meters).
- Activate Laser: With the device powered on, press the READ button once. A red laser dot will appear, indicating the measurement target.
- Take Measurement: Press the READ button a second time. The measured distance will instantly appear on the LCD display.
- Adjust Reference Point: The laser can measure from either the front or the back of the device. To change the reference point, press and hold the UNIT button. An icon on the display will indicate the current reference point (front or back).
4.3 Unit Conversion
The device supports multiple units of measurement for the laser function:
- Feet-Inch (e.g., 5' 6")
- Inch (1/16th) (e.g., 66 1/2")
- Inch Decimal (e.g., 66.5")
- Feet Decimal (e.g., 5.5 ft)
- Meter (e.g., 1.69 m)
To cycle through these units, short press the UNIT button while the device is powered on.
Video 4.2: Demonstration of laser measurement and unit conversion.
Video 4.3: Review and demonstration of the laser tape measure's functions.
5. Maintenance
- Cleaning: Wipe the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always use new AAA alkaline batteries.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Device not powering on: Check battery installation and ensure batteries are new and correctly inserted.
- Inaccurate laser readings: Ensure the laser lens is clean. Check the reference point setting (front/back of device). If persistent, refer to the full user manual for calibration instructions.
- Display issues: Low battery may cause dim or flickering display. Replace batteries.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | HISS |
| Color | Yellow, Clear |
| Blade Length | 16 Feet |
| Laser Measure Range | 196 Ft (60 m) |
| Measurement Accuracy | ±1/8 inch |
| Case Material | Nylon |
| Lock Type | Automatic |
| Blade Material | Metal |
| Item Weight | 14.1 ounces |
| Batteries | 2 AAA batteries (included) |
| Laser Class | Class IIA (<1mW) |
8. Warranty and Support
This HISS product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the full User Manual PDF available for download or contact HISS customer support.
For additional information and support, please visit the official HISS website or refer to the comprehensive User Manual (PDF) provided with your purchase.
User Manual (PDF): Download Here