Kastar BA-1B-V28U-22

Kastar Ni-MH Battery Replacement Instruction Manual

Model: BA-1B-V28U-22

1. Introduction

This instruction manual provides essential information for the safe and effective use of your Kastar Ni-MH Battery Replacement. Please read this manual thoroughly before using the battery and retain it for future reference.

2. Safety Information

To ensure safe operation and prolong the life of your battery, observe the following precautions:

  • Do not expose to high temperatures: Avoid direct sunlight, heat sources, or storing the battery in hot environments.
  • Do not disassemble: Attempting to open or modify the battery can lead to hazards.
  • Avoid short circuits: Do not allow metal objects to come into contact with the battery terminals.
  • Charge properly: Use only compatible chargers designed for Ni-MH batteries.
  • Environmental Protection: This Ni-MH battery is designed with eco-friendly cells, free from harmful substances like Mercury (Hg), Cadmium (Cd), and Lead (Pb). The DBCK steel shell provides protection against overpressure.
  • Extended Lifespan: The battery incorporates mix-protection additives to the cathode, which helps prevent material degradation during charging and discharging cycles, extending its lifespan up to 1000 cycles.
Kastar Ni-MH battery with caution label

Image 1: Kastar Ni-MH battery showing the caution label. The label advises against exposure to high temperatures, disassembly, or short circuits.

3. Product Overview

The Kastar Ni-MH Battery Replacement is designed to provide reliable power for compatible Sony camcorders. Key features include:

  • High Capacity: Engineered to offer extended operational time for your camcorder.
  • Low Self-Discharge: Features an embedded seal structure that helps the battery retain its charge for longer periods when not in use.
  • Battery Type: Ni-MH (Nickel-Metal Hydride)
  • Voltage: 6.0V
  • Capacity: 2650mAh
Top view of Kastar Ni-MH battery

Image 2: Top view of the Kastar Ni-MH battery, illustrating its compact design.

4. Compatibility

This Kastar battery is compatible with the following Sony battery and camcorder models:

Compatible Battery Models:

  • Sony: NP-33, NP-55, NP-55H, NP-66, NP-68, NP-77, NP-77H, NP-78, NP-90, NP-98, NP-98H, NP-99

Compatible Camcorder Models:

Sony CCD-TR Series:

  • CCD-TR100, CCD-TR101, CCD-TR105, CCD-TR105E, CCD-TR150, CCD-TR2000, CCD-TR202, CCD-TR202E, CCD-TR21, CCD-TR23, CCD-TR250E, CCD-TR28, CCD-TR30, CCD-TR303, CCD-TR305, CCD-TR305E, CCD-TR30S, CCD-TR31, CCD-TR323, CCD-TR323E, CCD-TR33, CCD-TR330, CCD-TR330E, CCD-TR333, CCD-TR333E, CCD-TR340E, CCD-TR353E, CCD-TR36, CCD-TR380E, CCD-TR385E, CCD-TR4, CCD-TR40, CCD-TR400, CCD-TR403, CCD-TR420, CCD-TR420E, CCD-TR44, CCD-TR440, CCD-TR440E, CCD-TR450, CCD-TR45E, CCD-TR45WH, CCD-TR490E, CCD-TR5, CCD-TR50, CCD-TR501E, CCD-TR502E, CCD-TR503E, CCD-TR505, CCD-TR505K, CCD-TR506, CCD-TR506E, CCD-TR507, CCD-TR50E, CCD-TR51, CCD-TR514, CCD-TR520E, CCD-TR530, CCD-TR54, CCD-TR55, CCD-TR550, CCD-TR55E, CCD-TR580E, CCD-TR590E, CCD-TR6, CCD-TR60, CCD-TR600, CCD-TR606E, CCD-TR60E, CCD-TR61, CCD-TR614, CCD-TR620E, CCD-TR64, CCD-TR65, CCD-TR66, CCD-TR7, CCD-TR70, CCD-TR700, CCD-TR705, CCD-TR705E, CCD-TR707, CCD-TR707E, CCD-TR70E, CCD-TR71, CCD-TR714, CCD-TR72, CCD-TR720E, CCD-TR73, CCD-TR74, CCD-TR740E, CCD-TR75, CCD-TR750, CCD-TR750E, CCD-TR75BR, CCD-TR75E, CCD-TR78, CCD-TR8, CCD-TR805, CCD-TR805E, CCD-TR808, CCD-TR81, CCD-TR814, CCD-TR82, CCD-TR83, CCD-TR84, CCD-TR86, CCD-TR88, CCD-TR880, CCD-TR880E, CCD-TR9, CCD-TR900, CCD-TR91, CCD-TR916, CCD-TR93, CCD-TR94, CCD-TR96, CCD-TR98, CCD-TR99

Sony CCD-TRV Series:

  • CCD-TRV10, CCD-TRV100, CCD-TRV10E, CCD-TRV11, CCD-TRV112, CCD-TRV119, CCD-TRV11E, CCD-TRV12, CCD-TRV14E, CCD-TRV19, CCD-TRV21, CCD-TRV211, CCD-TRV212, CCD-TRV21E, CCD-TRV22, CCD-TRV24E, CCD-TRV29, CCD-TRV30, CCD-TRV30E, CCD-TRV31, CCD-TRV312, CCD-TRV32, CCD-TRV33, CCD-TRV34, CCD-TRV40, CCD-TRV44, CCD-TRV44E, CCD-TRV512, CCD-TRV52, CCD-TRV53, CCD-TRV60, CCD-TRV70, CCD-TRV73

5. Setup and Installation

Follow these steps to prepare and install your new battery:

  1. Initial Charge: Before first use, fully charge the battery using a compatible Ni-MH battery charger. Refer to your charger's manual for specific charging instructions.
  2. Installing the Battery:
    • Ensure your camcorder is powered off.
    • Locate the battery compartment on your camcorder.
    • Align the battery with the compartment's terminals and slide it into place until it clicks securely.
    • Close the battery compartment cover, if applicable.

6. Operating the Battery

Once installed, the battery will power your camcorder. Monitor the battery level indicator on your camcorder to determine when recharging is necessary. For optimal performance, it is recommended to fully discharge and recharge Ni-MH batteries periodically to prevent memory effect.

7. Maintenance and Storage

Proper care extends battery life:

  • Regular Charging: Recharge the battery when its power is low. Avoid leaving it fully discharged for extended periods.
  • Storage: If storing the battery for a long time, charge it to about 50% capacity and store it in a cool, dry place away from direct sunlight and extreme temperatures. Recharge every 3-6 months to maintain its health.
  • Cleaning: Keep the battery terminals clean and free of dust or debris. Use a dry cloth to wipe them if necessary.
  • Disposal: Dispose of old or damaged batteries responsibly according to local regulations. Do not incinerate.

8. Troubleshooting

If you encounter issues with your battery, consider the following:

  • Battery not charging:
    • Ensure the charger is properly connected and functioning.
    • Check for any debris on the battery or charger terminals.
    • Verify that the charger is compatible with Ni-MH batteries.
  • Short operating time:
    • Ensure the battery is fully charged before use.
    • Ni-MH batteries can develop a "memory effect" over time. Perform a full discharge and recharge cycle.
    • Battery capacity naturally degrades over many charge cycles.
  • Battery not fitting in camcorder:
    • Double-check the compatibility list to ensure your camcorder model is supported.
    • Ensure the battery is oriented correctly before attempting to insert it.

9. Specifications

Model NumberBA-1B-V28U-22
Battery TypeNi-MH (Nickel-Metal Hydride)
Battery Voltage6.0V
Battery Capacity2650mAh
Product Dimensions1.85 x 0.93 x 3.51 inches
Item Weight7 ounces
ManufacturerKastar

10. Warranty and Support

For any questions, technical assistance, or support regarding your Kastar battery, please refer to the contact information provided with your purchase or visit the official Kastar website. Your feedback is valuable to us.

Kastar 'Help us Improve!' message on packaging

Image 3: Packaging showing a message encouraging customers to provide feedback to Kastar.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.