Instruction Manual for DOBE FOMIS ELECTRONICS TNS-19252 Switch Controller

1. Introduction

This manual provides comprehensive instructions for the DOBE FOMIS ELECTRONICS TNS-19252 Switch Controller. Designed for the Nintendo Switch console, this plug-and-play controller enhances your gaming experience with advanced features such as six-axis gyroscope, dual-motor vibration, and the ability to charge while playing. Please read this manual thoroughly before use to ensure proper installation and operation.

2. Product Features

• Plug and Play Connectivity: Designed for direct installation onto the Nintendo Switch console, providing automatic connection upon insertion.
• Enhanced Grip: Improves the ergonomic feel and comfort during extended gaming sessions.
• Dual-Motor Vibration: Provides realistic haptic feedback based on in-game scenarios, enhancing immersion.
• Six-Axis Gyroscope: Built-in gyroscope chip allows for accurate and sensitive somatosensory operations.
• Charge While Playing: Features a Type-C interface that supports charging the Switch console using its original power adapter or a standard 15V PD protocol power adapter.
• E-sports Level 3D Joystick: Offers precise and continuous direction output for agile in-game movements.
• Screen Capture Button: Dedicated button for capturing in-game screenshots.
• Customizable Button Caps: Flexible design allows for changing button caps to suit personal preferences.

Figure 2.1: Illustration of the six-axis gyroscope for precise motion sensing.

Figure 2.2: The Type-C charging port allows for fast charging while gaming.

Figure 2.3: Ergonomic design and e-sports level 3D joystick for enhanced control.

Figure 2.4: Dual-motor vibration provides immersive feedback during gameplay.

Figure 2.5: The controller features a non-slip and sweat-proof design for comfortable handling.

Figure 2.6: Product diagram illustrating the various function buttons and interfaces.

3. Setup Instructions

Follow these steps to properly set up your TNS-19252 controller with your Nintendo Switch console:

1. Prepare the Switch Console:
   • Before installing the controller, power on your Nintendo Switch console.
   • Navigate to the System Settings menu.
   • Locate the "Controllers and Sensors" setting item.
   • Set "Pro Controller Wired Communication" to "On".
2. Install the Controller:
   • Carefully slide your Nintendo Switch console into the grip of the TNS-19252 controller. Ensure it is securely seated.
   • The controller should automatically connect to the console upon proper insertion.
3. Calibrate Sensors (Recommended):
   • After connection, return to the "Controllers and Sensors" setting menu on your Switch.
   • Perform calibration for "Calibrate Rocker" and "Calibrate Gyro Sensor" to ensure optimal performance.

Figure 3.1: Enable "Pro Controller Wired Communication" in Switch System Settings.

Figure 3.2: The controller automatically connects once the Switch console is inserted.

Video 3.1: An official product video demonstrating the setup and key features of the TNS-19252 controller.

4. Operating Instructions

4.1 Basic Operation

Once the Nintendo Switch console is securely installed and connected to the TNS-19252 controller, you can begin playing games. The controller functions as a direct extension of your Switch, providing a more traditional and comfortable gaming experience.

• Button Layout: Refer to Figure 2.6 (Product Diagram) for the layout of all buttons, joysticks, and triggers.
• Screen Capture: Press the dedicated screen capture button (refer to Figure 2.6) to instantly save screenshots of your gameplay.
• Vibration Feedback: The dual-motor vibration system will automatically provide haptic feedback during compatible games, enhancing immersion.
• Gyroscope Control: For games that support motion controls, the built-in six-axis gyroscope allows for intuitive control by tilting the controller. Ensure calibration is performed as described in the Setup section.

4.2 Charging While Playing

The TNS-19252 controller supports charging the Nintendo Switch console while it is docked in the controller. This feature allows for extended gaming sessions without interruption.

• Locate the Type-C charging port on the bottom of the controller (refer to Figure 2.2).
• Connect the Nintendo Switch original power adapter or a standard 15V PD protocol power adapter to this port.
• The Switch console will begin charging while you continue to play.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your TNS-19252 controller.

• Cleaning: Use a soft, dry cloth to wipe down the controller regularly. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive cleaners.
• Storage: When not in use, store the controller in a cool, dry place away from direct sunlight and extreme temperatures. If a carrying case is provided, utilize it for protection during transport and storage.
• Avoid Liquid Exposure: Do not expose the controller to water or other liquids. In case of accidental spills, immediately disconnect from the Switch and allow it to dry completely before re-use.
• Handle with Care: Avoid dropping the controller or subjecting it to strong impacts, as this can damage internal components.

6. Troubleshooting

If you encounter issues with your TNS-19252 controller, please refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

For information regarding warranty coverage, technical support, or service for your DOBE FOMIS ELECTRONICS TNS-19252 Switch Controller, please contact the manufacturer directly or refer to the warranty card included with your purchase. You may also reach out to the seller from whom you purchased the product for assistance.

Please retain your proof of purchase for any warranty claims.