Amba Jeeves DSB D-Straight 20-Bar Hardwired Towel Warmer

1. Introduction

The Amba Jeeves DSB D-Straight 20-Bar Hardwired Towel Warmer is designed to provide warm, dry towels and bathrobes. This unit helps keep towels fresher and cleaner for longer, potentially reducing laundry frequency. It can be used in various settings such as bathrooms, laundry rooms, mud rooms, and wet rooms for drying delicates, jackets, bathing suits, and other clothing items.

This model features 20 straight horizontal bars, with all vertical and horizontal bars heating up. It is ideal for drying and warming 2 to 4 towels.

Image: Amba Jeeves DSB D-Straight 20-Bar Hardwired Towel Warmer in Brushed finish.

Image: Amba Jeeves DSB Towel Warmer installed in a modern bathroom setting.

Product Overview Video

2. Safety Information

• Read all instructions before installation and use.
• This appliance is for indoor use only.
• Ensure the towel warmer is installed by a qualified electrician in accordance with local electrical codes.
• Do not immerse the towel warmer in water or other liquids.
• Avoid using the towel warmer near bathtubs, showers, or swimming pools.
• The surface of the towel warmer can become hot. Exercise caution and supervise children when in use.
• Do not use the towel warmer for purposes other than drying and warming towels or similar fabric items.

3. Setup and Installation

The Amba Jeeves DSB Towel Warmer is a hardwired unit, requiring direct electrical connection. A separate On/Off switch or timer is required for operation and is not included with the unit. The unit can be wired on either the right or left side to accommodate your installation needs.

Installation Guide Video

4. Operating Instructions

Once properly installed and connected to a switch or timer, operate your Amba Jeeves DSB Towel Warmer by activating the connected switch. The unit typically takes 35 to 45 minutes to reach its optimal operating temperature. Additional time is required to effectively warm and dry towels.

How to Use and Benefits Video

Achieving Optimal Warmth

For best results, drape towels over the bars, ensuring good contact with the heated surfaces. Avoid overcrowding the towel warmer to allow for proper air circulation and efficient heating.

Image: Illustration of the recommended method for hanging towels on the warmer.

Experience Warmth Video

5. Maintenance and Care

The Amba Jeeves DSB Towel Warmer is constructed from 304 stainless steel, ensuring that the finish will not rust, chip, or flake. To maintain its appearance, simply wipe the unit with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.

Hygiene Benefits Video

Material and Finish Video

Image: An illustration detailing the high-quality materials used in Amba heated towel racks.

6. Troubleshooting

• Unit not heating: Ensure the power supply is active and the connected On/Off switch or timer is in the 'On' position. Verify electrical connections are secure.
• Insufficient warmth: Allow the unit sufficient time (35-45 minutes) to reach full temperature. Ensure towels are draped properly and not excessively layered, which can hinder heat transfer.
• Unusual noises: If you hear any unusual sounds, immediately disconnect power and contact customer support.

For further assistance, please refer to the Warranty & Support section.

7. Specifications

8. Warranty and Support

Warranty Information

• The Amba Jeeves DSB Towel Warmer comes with a 10-year warranty on the unit.
• The heating element is covered by a separate 2-year warranty.
• The Jeeves models feature a replaceable heating element.

Customer Support

For technical support, warranty claims, or any questions regarding your Amba Jeeves Towel Warmer, please contact Amba Products directly.

Manufacturer: Amba Products

Visit the Amba Store on Amazon for more information and contact options.