1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Electrolux ENS8TE19S built-in combined refrigerator-freezer. Please read these instructions carefully before using the appliance and keep them for future reference.
1.1 Safety Information
- Ensure the appliance is properly earthed.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- Always disconnect the appliance from the power supply before cleaning or maintenance.
- Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
- This appliance is intended for household use only.
2. Setup and Installation
The Electrolux ENS8TE19S is designed for built-in installation. Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified technician.
2.1 Unpacking
Carefully remove all packaging materials. Inspect the appliance for any damage during transit. Report any damage to your retailer immediately.
2.2 Positioning and Ventilation
- Ensure adequate ventilation around the appliance as specified in the installation guide (separate document).
- Avoid placing the appliance near heat sources (e.g., ovens, radiators, direct sunlight) to maintain energy efficiency.
2.3 Electrical Connection
- Connect the appliance to a properly earthed electrical outlet (Type F – 2 pins, Germany standard).
- The voltage requirement is 230 Volts. Ensure your household supply matches this.
2.4 Door Reversal (if applicable)
The appliance comes with the door hinged on the right. If you need to reverse the door opening direction, refer to the detailed instructions in the separate installation manual or contact a qualified service technician.
Image 1: Front view of the Electrolux ENS8TE19S built-in combined refrigerator-freezer. This image shows the appliance's exterior, designed for seamless integration into kitchen cabinetry.
3. Operating Instructions
3.1 Initial Start-up
- After installation, wait at least 4 hours before connecting the appliance to the power supply to allow the refrigerant to settle.
- Once connected, set the desired temperature using the electronic controls. Allow the appliance to cool for several hours before loading food.
3.2 Dual Touch Electronic Controls
The appliance features Dual Touch electronic controls, allowing precise temperature management for both the refrigerator and freezer compartments. The integrated display provides clear feedback on current settings. Refer to the control panel diagram in the full manual for specific button functions.
3.3 MultiSpace Design
The MultiSpace design offers increased capacity compared to standard models. This feature provides flexible storage solutions, allowing you to customize the interior layout to accommodate various food items.
3.4 CustomFlex Storage System
The CustomFlex system allows you to personalize the refrigerator door storage. It includes movable containers of different sizes that can be repositioned or removed to suit your storage needs. This provides flexibility for organizing items of various shapes and sizes.
3.5 TwinTech No Frost Technology
The TwinTech No Frost system utilizes a dual refrigeration system to prevent food from drying out and to eliminate ice build-up in the freezer. This advanced No Frost technology cools the refrigerator and freezer independently, maintaining optimal humidity levels in the refrigerator and ensuring a frost-free freezer compartment.
4. Maintenance and Cleaning
Regular cleaning and maintenance ensure the longevity and efficient operation of your appliance.
4.1 Cleaning the Interior
- Before cleaning, disconnect the appliance from the power supply.
- Clean the interior regularly with a soft cloth and a mild, non-abrasive detergent.
- Rinse with clean water and dry thoroughly. Avoid using harsh chemicals or abrasive cleaners.
- Removable shelves (tempered glass) and CustomFlex containers can be washed with warm soapy water.
4.2 Cleaning the Exterior
Wipe the exterior surfaces with a soft, damp cloth. For stubborn marks, use a mild detergent. Ensure no water enters the electrical components.
4.3 Defrosting
The TwinTech No Frost technology automatically prevents ice build-up in the freezer compartment, eliminating the need for manual defrosting. The refrigerator compartment also features automatic defrosting.
5. Troubleshooting
Before contacting service, please check the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not operate. | No power supply. | Check if the plug is correctly inserted into the socket. Check the fuse. |
| Temperature is not cold enough. | Door not closed properly; too much food loaded; high ambient temperature; temperature setting too high. | Ensure door is sealed; reduce food load; adjust temperature setting lower. |
| Excessive noise. | Appliance not level; objects touching the back wall. | Adjust leveling feet; ensure nothing is touching the appliance. |
| Water on the bottom of the refrigerator compartment. | Drain hole blocked. | Clean the drain hole with a small tool (e.g., pipe cleaner). |
If the problem persists after checking these points, please contact Electrolux customer service.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | ENS8TE19S |
| Brand | Electrolux |
| Installation Type | Built-in |
| Configuration | Bottom Freezer |
| Total Capacity | 267 Litres |
| Dimensions (L x W x H) | 23.23 x 82.28 x 22.83 cm (Note: Overall product height is approximately 189.4 cm as per product title) |
| Defrost System | Automatic (No Frost) |
| Voltage | 230 Volts |
| Shelf Type | Tempered Glass |
| Number of Doors | 2 |
| Door Hinge Position | Right |
| Compressor Type | Rotary Screw |
| Power Source | Corded Electric |
| Adjustable Temperature Control | Yes |
7. Warranty and Support
7.1 Compressor Warranty
This appliance includes a ten-year warranty on the compressor. This warranty covers potential damages related to labor, transport, removal, gas refilling, or general maintenance of the compressor unit. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For further assistance, technical support, or warranty claims, please contact Electrolux customer service. Refer to the official Electrolux website or your purchase documentation for contact details specific to your region.