Introduction
Welcome to your new Carson Lume Series Magnifier. This manual provides instructions for the proper setup, operation, and maintenance of your AS-95 magnifier. The Carson Lume Series AS-95 features a 2x aspheric main lens, a 7x spot lens, and three ultra-bright COB LED lights with two brightness settings for enhanced viewing.
1. Setup
1.1 Battery Installation
The magnifier requires 2 AAA batteries (not included).
- Locate the battery compartment cover at the base of the handle.
- Gently slide the cover downwards in the direction of the arrow to open.
- Insert 2 AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Slide the battery cover back into place until it clicks securely.

2. Operation
2.1 Using the Main 2x Magnifier
Hold the magnifier approximately 3-5 inches above the object you wish to magnify. Adjust the distance slowly until the image is clear and in focus. The large 4.25-inch aspheric lens provides a wide, distortion-free view.

2.2 Using the 7x Spot Lens
For higher magnification of very small details, use the integrated 7x spot lens. This smaller lens is located within the main lens area. Position the spot lens directly over the area you need to examine closely.

2.3 Activating the COB LED Lights
The magnifier features three ultra-bright COB LED lights for illumination.
- Press the power button located on the handle once for the low brightness setting.
- Press the power button a second time for the high brightness setting.
- Press the power button a third time to turn the lights off.
The COB LEDs are designed to provide even, glare-free illumination across the viewing area.

3. Care and Maintenance
3.1 Cleaning the Lens
To clean the lens, use a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners, chemical solvents, or rough cloths, as these can scratch the lens.
3.2 Storage
Store the magnifier in a clean, dry place away from direct sunlight and extreme temperatures. To prevent scratches, avoid placing the lens face down on hard surfaces.
3.3 Battery Replacement
If the LED lights dim or stop working, replace the AAA batteries as described in the "Battery Installation" section. Remove batteries if the device will not be used for an extended period to prevent leakage.
4. Troubleshooting
4.1 Blurry Image
Ensure the magnifier is held at the correct distance from the object. Adjust the distance slowly until the image comes into clear focus.
4.2 Lights Not Working
Check if the batteries are inserted correctly with the proper polarity. Replace the batteries if they are old or depleted.
4.3 Uneven Illumination
The COB LEDs are designed for even light distribution. If illumination appears uneven, ensure the lens is clean and free of smudges or debris.
5. Specifications
| Feature | Detail |
|---|---|
| Model | AS-95 |
| Main Magnification | 2x |
| Spot Lens Magnification | 7x |
| Lens Type | Aspheric |
| Lens Diameter | 4.25 inches |
| Illumination | 3 Ultra-Bright COB LEDs |
| Brightness Settings | 2 |
| Power Source | 2 x AAA Batteries (not included) |
| Material | Acrylic (Lens), Plastic (Handle) |
| Item Weight | 164 Grams |
| Color | Black |
6. Warranty Information
This Carson product comes with a Limited Lifetime Warranty. For detailed warranty terms and conditions, please refer to the official Carson website or contact customer support.
7. Customer Support
If you have any questions or require assistance with your Carson Lume Series Magnifier, please visit the official Carson website or contact their customer support team.
Online Support: www.carson.com





