Salomon S/Max 90 Women's Ski Boot Instruction Manual

1. Product Overview

The Salomon S/Max 90 Women's Ski Boots are designed to provide a precise, warm, and comfortable fit, delivering exceptional on-piste performance. Featuring Custom HD Shell construction and anatomically shaped seamless liners, these boots offer a tailored fit for efficient energy transfer from the foot to the ski. They are engineered to be lightweight, powerful, and smooth for an optimal skiing experience.

Image 1.1: Side view of the Salomon S/Max 90 Women's Ski Boot, showcasing the overall design and buckle system.

2. Setup and Initial Adjustment

Proper setup is crucial for comfort and performance. Follow these steps for initial adjustment:

1. Unbuckling and Entry: Fully unbuckle all four buckles and loosen the power strap. Pull the tongue forward to open the boot wide. Slide your foot into the boot, ensuring your heel is seated firmly against the back.
2. Buckle Closure: Start by gently closing the two lower buckles (forefoot and instep) to a comfortable, snug fit. Then, close the two upper buckles (cuff) to secure your ankle and lower leg. Avoid overtightening.
3. Power Strap: Fasten the power strap around the top of the cuff. This strap provides additional support and helps transfer energy to the ski. Adjust it for a firm but not restrictive feel.
4. Flex Test: Stand up and flex forward at the ankles, mimicking a skiing stance. The boot should allow for natural forward flex without excessive pressure points. If the boot feels too stiff or too soft, minor adjustments to buckle tension can be made.
5. Liner Molding (if applicable): These boots feature seamless liners. For optimal fit, consider having them heat-molded by a certified boot fitter. This process customizes the liner to the contours of your foot, enhancing comfort and performance.

Image 2.1: Rear view of the ski boot, showing the cuff and upper shell design.

3. Operating Your Ski Boots

Once your boots are properly set up, understanding their operation ensures a safe and enjoyable skiing experience.

• Putting On: Always ensure boots are at room temperature before putting them on. Cold plastic is stiffer and harder to open. Follow the unbuckling and entry steps from Section 2.
• Buckle Tension During Skiing: During skiing, buckles should be snug enough to hold your foot securely without causing discomfort or restricting circulation. It is common to adjust buckle tension throughout the day as your feet swell or conditions change. The top two buckles and power strap are critical for controlling the ski.
• Walking: When walking, you may loosen the top two buckles and power strap to allow for more ankle articulation. However, ensure they are re-tightened before skiing. The rubber sole material provides some grip, but caution should always be exercised on slippery surfaces.
• Taking Off: Fully unbuckle all buckles and loosen the power strap. Pull the tongue forward and use the rear loop on the liner to help pull your foot out.

Image 3.1: Front view of the ski boot, highlighting the buckle system and power strap.

4. Maintenance

Regular maintenance extends the life of your ski boots and ensures consistent performance.

• Drying Liners: After each use, remove the liners from the shells and allow them to air dry completely at room temperature. Avoid direct heat sources like radiators or heaters, as this can damage the liner material. Ensure the shells also dry thoroughly.
• Cleaning: Wipe down the exterior of the boots with a damp cloth to remove dirt, snow, and salt. For stubborn grime, a mild soap solution can be used. Do not use harsh chemicals or solvents.
• Buckle Inspection: Periodically check all buckles, straps, and screws for any signs of wear, damage, or looseness. Tighten any loose screws. Replace damaged components immediately.
• Storage: When storing your boots for extended periods (e.g., off-season), buckle them loosely to maintain their shape. Store them in a cool, dry place away from direct sunlight and extreme temperatures.

Image 4.1: Bottom view of the ski boot sole, showing the rubber material and binding interface points.

5. Troubleshooting Common Issues

Here are solutions to common problems you might encounter:

• Pressure Points/Discomfort:
  • Solution: Loosen buckles slightly. If persistent, consider professional boot fitting for shell modification or liner adjustment. Ensure socks are thin and wrinkle-free.
• Loose Fit/Heel Lift:
  • Solution: Tighten buckles, especially the instep and cuff buckles, and the power strap. Ensure your heel is fully seated before buckling. A professional boot fitter can assess if a volume reducer or custom footbed is needed.
• Difficulty Getting Boots On/Off:
  • Solution: Ensure boots are at room temperature. Fully unbuckle all buckles and pull the tongue forward as much as possible. Use a boot horn if necessary.
• Cold Feet:
  • Solution: Ensure liners are dry. Wear appropriate, non-cotton ski socks. Check if boots are too tight, restricting circulation.

Image 5.1: View of the ski boot with the liner removed, showing the internal shell structure and the seamless liner.

6. Specifications

Key technical specifications for the Salomon S/Max 90 Women's Ski Boot:

7. Warranty Information

Salomon products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and product. Please retain your proof of purchase for any warranty claims.

For detailed warranty information, please refer to the official Salomon website or contact their customer support directly.

8. Support

If you require further assistance, have questions about your Salomon S/Max 90 Ski Boots, or need to report an issue, please contact Salomon customer support.

• Online Support: Visit the official Salomon website for FAQs, product registration, and contact forms.
• Authorized Retailers: Your local authorized Salomon retailer or ski shop can often provide expert advice, fitting services, and assistance with product issues.