Introduction
This manual provides instructions for the MONSIATUG Replacement Remote Control, designed for various Jensen TV models. This remote control is ready to use immediately after battery installation, requiring no programming.
Compatible Jensen TV models include: JTV2815DC, JTV19DC, JTV1917DVDC, JE4208, JE5015, JE1911, JE3211, JE2414, JE2417, JE2814, JE2815, JE3208, JE3217, JE4015, JE4815, JE2608WV, JE1914DVDC, JE1913AC2, JE3213AC, JE3214, JE1914, JE2414, JE2613AC, PSVCJE1912LED, RTPSVCJE1912LED, JE2212LED, JE2613, JE3213, JE1913, PSVCJE3212, PSVCJE1914, LE3212LED, PSVCJE3212LED, PSVCJE2212LED, PSVCJE1914LED, JE3212LED, PSVCJE3212LED, JE3215, JE2608WV, JE2611RTL, JE1911, JE3211, JE1909, JE1909ACB, JE2611, JE4011, JE4011RTL, PSVCJE4208, JE4208, JE1907, JE1907DC, JE2411, PSVCJE909, PSVCJE1911.
Setup
Battery Installation
The remote control requires two (2) AA batteries for operation. Batteries are not included with the product.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Rear view of the remote control, highlighting the battery compartment cover. This is where two AA batteries should be inserted for operation.
Once batteries are installed, the remote control is ready for immediate use with compatible Jensen TV models. No additional programming is required.
Operating Instructions
This remote control provides full functionality for your compatible Jensen TV. Point the remote directly at the TV's infrared sensor for optimal performance.
Image: Front view of the MONSIATUG replacement remote control, displaying all buttons for TV and DVD functions. The buttons are clearly labeled for easy identification.
Key Functions:
- POWER (Red Button): Turns the TV on or off.
- TV/DVD (Top Right Buttons): Selects between TV and DVD modes if your TV has an integrated DVD player or connected DVD device.
- Number Buttons (0-9): Directly input channel numbers.
- CH +/-: Changes channels up or down.
- VOL +/-: Adjusts the volume level.
- MUTE: Silences the TV audio.
- SOURCE: Cycles through available input sources (e.g., HDMI, AV).
- MENU: Accesses the TV's main menu.
- Navigation Arrows (Up, Down, Left, Right) & ENTER: Navigate through menus and confirm selections.
- EXIT: Exits the current menu or on-screen display.
- EPG: Accesses the Electronic Program Guide (if supported by your TV and broadcast).
- SETUP: Enters the setup menu.
- AUDIO: Adjusts audio settings or selects audio tracks.
- SUB-T: Activates or deactivates subtitles.
- DISP: Displays information about the current program or input.
- SLEEP: Sets a sleep timer for the TV.
- CC: Activates or deactivates Closed Captions.
- PICTURE: Adjusts picture settings.
- RETURN: Returns to the previous channel or menu.
For specific functions not listed, refer to your Jensen TV's original user manual.
Maintenance
Cleaning the Remote Control
To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both AA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.
Dispose of used batteries according to local regulations.
Troubleshooting
Remote Control Not Responding
- Check Batteries: Ensure the batteries are inserted correctly with the correct polarity (+/-). Replace old batteries with new AA batteries.
- Line of Sight: Make sure there are no obstructions between the remote control and the TV's infrared sensor. The remote requires a clear line of sight to operate.
- Distance: Ensure you are within an effective range of the TV.
- TV Compatibility: Verify that your Jensen TV model is listed as compatible with this remote control. While this remote is designed for a wide range of Jensen TVs, some older or very new models might have different infrared codes.
- Infrared Interference: Bright sunlight or strong artificial light sources can sometimes interfere with the remote's infrared signal. Try operating the remote in a different lighting condition.
If the issue persists after performing these checks, contact customer support.
Specifications
| Brand | MONSIATUG |
| Model Number | MX-SB-144 |
| Compatible Devices | Jensen Televisions (various models) |
| Batteries Required | 2 x AA (not included) |
| Special Feature | No Programming Required |
| Color | Black |
| Max Number of Supported Devices | 1 |
| Item Weight | 4.3 ounces |
| Package Dimensions | 9.69 x 4.09 x 1.5 inches |
| Manufacturer | MONSIATUG |
Warranty Information
This MONSIATUG Replacement Remote Control comes with a 30-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For any questions, concerns, or if your specific TV model is not listed in the compatibility section, please contact MONSIATUG customer support. We are here to assist you.
Please refer to the retailer's website or your purchase documentation for contact information.