NIORSUN NI-08

NIORSUN Solar Indoor/Outdoor LED Pendant Lights Instruction Manual

Model: NI-08

Introduction

Thank you for choosing NIORSUN Solar Indoor/Outdoor LED Pendant Lights. This product is designed to provide efficient and versatile lighting for various indoor and outdoor environments, utilizing solar energy for a sustainable and cost-effective solution. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your lights.

NIORSUN Solar Pendant Light features including Auto ON/OFF, Manually ON/OFF, IP65 Waterproof, Dimmable, Energy Saving, and 3000K/4000K/5000K color temperatures.

Figure 1: Key features of the NIORSUN Solar Pendant Light.

Safety Information

Ensure the solar panel is installed in a location that receives direct sunlight for optimal charging.
Do not submerge the pendant lights or solar panel in water, despite their IP65 waterproof rating.
Keep the product away from fire or high temperatures.
Do not attempt to disassemble or modify the product. Refer to qualified personnel for repairs.
Keep out of reach of children.

Package Contents

Verify that all components are present in your package:

2 x Solar Pendant Lights
1 x Solar Panel
1 x Remote Control
1 x Screw Kit (for mounting)
Instruction Manual

Diagram showing all included components: two pendant lights, one solar panel, remote control, and screw kit.

Figure 2: All components included in the NIORSUN Solar Pendant Light 2-pack.

Setup & Installation

Initial Charging

Before first use, ensure the solar panel is placed in direct sunlight for 6-8 hours to fully charge the internal batteries. The red indicator light on the pendant light will flash during charging and turn off when fully charged.

Solar panel charging on a rooftop, with text indicating 6-8 hours charging time and max 16 hours lighting time. Also shows IP65 waterproof, heat resistant, and frost resistant features.

Figure 3: Solar panel charging and environmental resistance.

Mounting the Solar Panel

Choose a location for the solar panel that receives maximum direct sunlight throughout the day. Use the provided screw kit to securely mount the panel. The panel is designed to withstand various weather conditions.

Close-up of a solar panel under bright sunlight, indicating 6-8 hours charging time and 16 hours lighting time.

Figure 4: Solar panel charging in direct sunlight.

Mounting the Pendant Lights

The pendant lights come with a metal hanging ring for easy installation. You can hang them in desired locations such as gazebos, sheds, patios, or indoors. The cable length from each lamp to the solar panel is 16.4ft (5m), allowing for flexible placement.

Close-up of the pendant light's hanging ring with a cable zip tie, illustrating easy installation.

Figure 5: Detail of the hanging ring and cable connection.

Connecting Components

Connect the cables from the pendant lights to the solar panel. Ensure the waterproof connectors are securely fastened to prevent water ingress.

Close-up of a waterproof cable connector, showing how to connect the light to the solar panel.

Figure 6: Securely connecting the waterproof cable.

Operating Instructions

The NIORSUN Solar Pendant Lights can be controlled via the included remote control, offering various lighting modes and settings.

Diagram of the remote control with labels for each button: NC (turn off light sensing mode), ON/OFF, 100% Brightness, 50% Brightness, Cool White (W), Natural White (WY), Warm White (Y), AUTO (turn on light sensing mode), 3H, 5H, 8H (timing setting).

Figure 7: Remote Control Functions.

ON/OFF: Press the 'ON' button to turn the lights on, and 'OFF' to turn them off.
Brightness Adjustment: Use the sun icon buttons to adjust brightness. The lights offer 100% and 50% brightness levels.
Color Temperature: Choose from three color temperatures: 'W' for Cool White (5000K), 'Y' for Warm White (3000K), and 'WY' for Natural White (4000K).
NC (Turn off Light Sensing Mode): Press 'NC' to disable the light sensing mode, allowing manual control even during the day.
AUTO (Light Sensing Mode): Press 'AUTO' for dusk-to-dawn operation. The lights will automatically turn on at night and turn off at dawn.
Timer Settings: Set the lights to turn off automatically after 3, 5, or 8 hours using the '3H', '5H', or '8H' buttons.

Two panels illustrating control modes: Manually Turn ON & OFF with remote control, and Automatically Turn ON & OFF (Dusk to Dawn) with solar panel.

Figure 8: Manual and Automatic Control Modes.

Three light settings: 3000K Warm Light, 4000K Natural Light, 5000K White Light, with a hand holding the remote control to freely control each light.

Figure 9: Adjusting color temperature with the remote control.

Video 1: Official NIORSUN demonstration of solar pendant lights with 3000K/4000K/5000K color temperature options.

Maintenance

Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may hinder charging efficiency. Clean the pendant lights as needed.
Battery Care: For optimal battery life, ensure the solar panel receives adequate sunlight daily. Avoid prolonged periods of non-use in dark conditions.
Waterproofing: While rated IP65 waterproof, ensure all cable connections are tight and secure to prevent water from entering the system, especially where the cord attaches to the light.

Troubleshooting

Problem	Possible Cause	Solution
Lights do not turn on at night.	Insufficient charging; AUTO mode not activated; solar panel obstructed.	Ensure solar panel receives 6-8 hours of direct sunlight. Press 'AUTO' on remote. Clear any obstructions from the solar panel.
Lights are dim or turn off quickly.	Insufficient charge; low battery capacity.	Allow more charging time. Ensure solar panel is clean. If problem persists after prolonged use, battery may be degrading.
Remote control not working.	Remote batteries dead; remote out of range; signal obstruction.	Replace AAA batteries in remote. Ensure remote is within 40ft range. Clear line of sight between remote and lights.
Water inside the light fixture.	Loose cable connection.	Ensure all cable connections are tightly sealed. Apply silicone sealant around the cord entry point if necessary.

Specifications

Brand: NIORSUN
Model Name: Solar Indoor Lights Outdoor
Item Model Number: NI-08
Power Source: Solar Powered
Light Source Type: LED
Number of Light Sources: 2
Brightness: 2x400 Lumens (Total 800 Lumens)
Color Temperature: 3000K (Warm White), 4000K (Natural White), 5000K (Cool White)
Battery Capacity: 2x4000mAh (Total 8000mAh)
Solar Panel: 6V/6W Polysilicon
Charging Time: 6-8 hours (in full direct sunlight)
Lighting Time: Max. 16 hours (fully charged)
Control Method: Remote Control (up to 40ft range)
Water Resistance Level: IP65 Waterproof (lights and panel)
Material: Aluminum, Metal
Product Dimensions: 7.9"L x 7.9"W x 3.1"H (per light)
Cable Length: 2x16.4ft (5m) from each lamp to solar panel
Battery Life: Approximately 5 years (2000 charge/discharge cycles)

Comparison table showing NIORSUN features vs. 'Other' brands, highlighting superior lighting mode, color temperature, lumen, battery capacity, lighting time, photovoltaic panels, and battery life.

Figure 10: Product specifications comparison.

Warranty & Support

NIORSUN provides a worry-free 24-month friendly after-sales service for this product. If you have any questions or encounter any issues with your solar powered lights, please do not hesitate to contact us for assistance.

For purchasing extension cables, search ASIN: B0BRQLFF9W on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.