1. Introduction and Product Overview
The TinkerTools AW-22 AW22 Kerosene Heater Allied Wick is a high-quality replacement component designed for various kerosene heaters. This wick is engineered to provide an exact fit, ensuring optimal performance and safety for your heating appliance. It is crucial to use the correct wick for your specific heater model to maintain efficiency and prevent operational issues.
This wick features exact length, diameter, and thickness specifications to ensure compatibility and proper fuel absorption and combustion. It is a critical part of your kerosene heater's functionality, directly impacting flame quality and heat output.
This image displays the retail packaging for the AW-22 Kerosene Heater Allied Wick. The packaging is a clear plastic bag with a red and white header featuring a star design and the text 'KEROSENE HEATER WICK American Wick'. The wick itself, made of white fibrous material, is visible through the clear plastic, with a black band at the top indicating the 'AW 22' model number and 'American Wick' branding. The text 'MADE IN ENGLAND' is also visible.
2. Setup and Installation
Proper installation of the AW-22 AW22 wick is essential for safe and efficient heater operation. Always refer to your specific kerosene heater's owner's manual for detailed, model-specific instructions. The following are general guidelines:
- Safety First: Ensure the heater is completely cool, unplugged (if applicable), and free of fuel before beginning any work. Work in a well-ventilated area.
- Access the Wick Assembly: Carefully remove the heater's top cover, combustion chamber, and any other components necessary to access the old wick and its assembly.
- Remove Old Wick: Loosen the screws or clips holding the old wick in place. Gently pull the old wick out of its holder. Dispose of the old wick responsibly.
- Clean Wick Holder: Clean any carbon buildup or debris from the wick holder and surrounding areas. A clean surface ensures the new wick seats properly.
- Install New Wick: Carefully insert the new AW-22 AW22 wick into the wick holder. Ensure it is seated evenly and securely. The wick should move smoothly up and down if it's a movable type.
- Reassemble Heater: Reattach all components in reverse order of removal, ensuring all parts are securely fastened.
- Saturate Wick: Fill the heater's fuel tank with clean, fresh kerosene. Allow at least 60 minutes for the new wick to fully saturate with fuel before attempting to light the heater. This prevents damage to the wick.
3. Operating Guidelines (Wick-Specific)
Once the AW-22 AW22 wick is installed and fully saturated, operate your kerosene heater according to its manufacturer's instructions. The wick's primary function is to draw fuel to the combustion area. Ensure the wick is adjusted to the correct height for a stable, blue flame with minimal yellow tips. A proper flame indicates efficient combustion and optimal heat output.
Avoid operating the heater with a wick that is too low, as this can lead to incomplete combustion and odor. Conversely, a wick that is too high can produce excessive soot and a large, unstable flame.
4. Maintenance
Regular maintenance of your AW-22 AW22 wick will extend its lifespan and ensure consistent heater performance.
- Wick Cleaning (Dry Burn): Periodically, perform a 'dry burn' to remove carbon buildup. With the heater running, allow it to burn off all remaining fuel until the flame extinguishes naturally. This process helps to clean the wick.
- Trim Carbon: After a dry burn and once the wick is cool, you may gently brush off any loose carbon deposits from the top of the wick using a soft brush or cloth. Do not cut or trim the wick unless specifically instructed by your heater's manual.
- Fuel Quality: Always use only 1-K grade kerosene. Impure or contaminated fuel can quickly clog and damage the wick, leading to poor performance and increased odor.
- Storage: If storing the heater for an extended period, remove all fuel from the tank and allow the wick to dry completely. This prevents gumming and deterioration of the wick.
5. Troubleshooting (Wick-Related)
If you experience issues with your kerosene heater, the wick may be a contributing factor. Here are common wick-related problems and solutions:
| Problem | Possible Cause (Wick-Related) | Solution |
|---|---|---|
| Low, weak flame or no flame | Wick not fully saturated; wick too low; wick clogged with carbon/tar; wick worn out. | Ensure wick is saturated; adjust wick height; perform dry burn; replace wick. |
| Excessive smoke or odor | Wick too high; wick clogged; poor fuel quality. | Adjust wick height; perform dry burn; use fresh 1-K kerosene; replace wick if necessary. |
| Difficulty igniting | Wick not saturated; wick too low; wick worn out. | Allow more saturation time; adjust wick height; replace wick. |
| Uneven flame | Wick not seated evenly; partial clogging. | Re-seat wick; perform dry burn. |
If these steps do not resolve the issue, consult your heater's specific troubleshooting guide or contact a qualified technician.
6. Specifications
The TinkerTools AW-22 AW22 Kerosene Heater Allied Wick is manufactured to precise standards to ensure compatibility and performance.
- Brand: TinkerTools
- Model: AW-22 AW22
- Special Feature: Replacement Part for Specific Heaters
- Item Weight: Approximately 3.2 ounces
- Fuel Type Compatibility: Kerosene (1-K grade recommended)
- Dimensions (Packaging): Approximately 10.8" H x 8" W x 0.4" L
- UPC: 654204800517
- Fits Models: Aladdin TR6000, Aloha JY-1130, Arturo API JY-1130, Comfort Glow C-22600, ComfortTemp GG8440, Corona 22DK, 22DKA, 22DKB, 22DKC, XLDK, Crestline 3870, Heatmate 2200, Henry Island Magnum, Keray Husky II, Magnum 22, Northern Light Magnum 23, Northstar NS22, Sun Air Glow US235, Suncrest 4870, Teknika TKC2000, 2200, Thousand.
7. Warranty and Support
Information regarding specific warranty coverage for the TinkerTools AW-22 AW22 Kerosene Heater Allied Wick is not provided in this manual. For warranty details, please refer to the product packaging or contact TinkerTools customer support directly. For technical assistance or further inquiries, please reach out to the manufacturer or the retailer from whom the product was purchased.