1. Introduction
This manual provides essential information for the safe and efficient operation of your FECiDA 130W LED Grow Light, Model GL-CR600. This full-spectrum grow light is designed to support all stages of plant growth, from seedling to bloom, with its dimmable and daisy-chain capabilities. Please read this manual thoroughly before installation and use.
2. Safety Information
- Always disconnect the power supply before installation, maintenance, or moving the light.
- Do not look directly at the LED lights when they are operating. Eye protection is recommended.
- Ensure the installation environment is dry and well-ventilated. This product is for indoor use only.
- Do not block the cooling fan or vents on the light fixture to prevent overheating.
- Keep the light away from water, heat sources, and flammable materials.
- Use only the provided power cable and hanging accessories.
- If any damage is observed, discontinue use and contact customer support.
3. Package Contents
Verify that all items are present in your package:
- 1 x FECiDA LED Grow Light CR600
- 1 x Power Cable
- 1 x Hanging Kits
- 1 x Rope Hanger
- 1 x User Manual (this document)
4. Product Features
- 130W Real Power (1200W Equivalent): Delivers high light intensity while consuming only 130W, comparable to a 1200W traditional HPS light.
- Full Spectrum Output: Balanced light spectrum (380–780 nm) suitable for all plant growth stages: seedling, vegetative, and bloom. Includes white, red, and blue diodes for optimal photosynthesis.
- 0–100% Smooth Dimming: Stepless dimming knob allows precise adjustment of light intensity for different growth phases.
- Daisy Chain Design: Connect up to 8 lights together using the daisy chain port, simplifying wiring for larger grow setups.
- Quiet Cooling System: Features a high-efficiency aluminum heat sink and a low-noise fan for effective heat dissipation, extending the light's lifespan beyond 50,000 hours.
- UV-IR Included: Incorporates UV and IR LEDs to enhance plant growth and yield quality.
5. Setup
- Unpack: Carefully remove the grow light and all accessories from the packaging. Inspect for any damage.
- Attach Hanging Kits: Connect the provided hanging wires to the four corners of the grow light fixture.
- Install Rope Hanger: Attach the rope hanger to the hanging wires. The rope hanger allows for easy adjustment of the light's height.
- Mount the Light: Securely hang the grow light from a sturdy support structure in your grow tent or indoor garden area. Ensure it is level and stable.
- Connect Power: Plug the power cable into the light fixture and then into a suitable electrical outlet.
- Daisy Chain (Optional): If connecting multiple lights, use the provided power cable as a daisy chain cable. For 110VAC input, connect a maximum of 4 CR600 lights. For 220VAC input, connect a maximum of 8 CR600 lights. Connect the output port of one light to the input port of the next.
6. Operating Instructions
- Power On/Off: Turn the dimming knob to the "OFF" position to power off the light. Turn it clockwise to power on and increase intensity.
- Adjust Brightness: Use the stepless dimming knob to adjust the light intensity from 0% to 100%. This allows you to customize the light output according to your plants' specific needs at different growth stages.
- Recommended Settings:
- Seed Starting / Seedlings: 30% intensity (approx. 39W), 12 hours/day, hanging height 14in/35cm.
- Growing / Vegetative: 60% intensity (approx. 78W), 14 hours/day, hanging height 14in/35cm.
- Flower / Blooming: 90% intensity (approx. 117W), 16 hours/day, hanging height 14in/35cm.
7. Maintenance
- Cleaning: Periodically wipe the light fixture with a soft, dry cloth to remove dust and debris. Ensure the light is unplugged before cleaning.
- Fan and Vents: Ensure the cooling fan and vents are free from obstructions to maintain optimal airflow and prevent overheating. Do not attempt to open the unit to clean internal components.
- Cable Inspection: Regularly check the power cable and hanging wires for any signs of wear or damage. Replace immediately if damage is found.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, dimming knob set to OFF. | Check power outlet, ensure cable is securely plugged in, turn dimming knob clockwise from OFF. |
| Light intensity is too low. | Dimming knob set to low percentage. | Adjust the dimming knob to a higher percentage. |
| Light is overheating. | Blocked fan/vents, poor ventilation in grow area. | Ensure fan and vents are clear. Improve air circulation in the grow space. |
| IR LEDs appear dim. | Normal operation for IR LEDs. | IR LEDs (730nm) are designed to be much dimmer than red LEDs and may not be visible to the naked eye. This is normal and does not indicate a fault. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact FECiDA customer support for assistance.
9. Specifications
| Model Number | GL-CR600 |
| Rated Power | 130 Watts |
| Input Voltage | AC100V-240V |
| Number of LEDs | 588 PCS |
| Waterproof Rating | IP44 |
| Product Size (L x W x H) | 12.4"L x 8.4"W x 1.8"H (31.5cm x 21cm x 4.5cm) |
| Net Weight | 1.35 Kilograms (3 lbs) |
| Material | Aluminum |
| Light Source Type | LED |
| Color Temperature | 4000 Kelvin |
| Color Rendering Index (CRI) | 80 |
| Special Features | Dimmable, UV-IR |
10. Warranty and Support
FECiDA offers a 2-year warranty for this LED Grow Light. Additionally, a 30-day money-back guarantee is provided. For any service inquiries, technical support, or warranty claims, please contact FECiDA customer service. FECiDA has over 13 years of experience in manufacturing LED grow lights and is committed to providing reliable products and excellent service to all gardening enthusiasts.
You can find more information and contact details on the official FECiDA store page: FECiDA Store.
