1. Product Overview
The TIDRADIO Speaker Microphone is designed to enhance communication for users of Ham and GMRS radios. This handheld accessory allows for convenient speaking and listening without needing to directly handle your radio, improving operational efficiency and comfort.
Key features include a high-performance micro speaker, a noise-cancellation microphone, and a durable design with a rotatable clip for versatile attachment.
Figure 1: Front view of the TIDRADIO Speaker Microphone, showing the speaker grill, microphone, and the twin right-angle connector for radio compatibility.
2. Setup and Installation
To set up your TIDRADIO Speaker Microphone, follow these steps:
- Identify Radio Port: Locate the accessory port on your compatible Ham or GMRS radio. This is typically a dual-pin jack.
- Connect Microphone: Insert the twin right-angle connector of the speaker microphone into the corresponding ports on your radio. The top pin is 3.5mm stereo (ear), and the bottom pin is 2.5mm stereo (mic). Ensure a firm connection.
- Secure Microphone: Utilize the rotatable clip on the back of the microphone to attach it to your clothing, such as a shirt collar, shoulder, or belt, for easy access and hands-free operation.
Figure 2: The speaker microphone features a coiled cable for flexibility and a twin right-angle connector for secure attachment to compatible radios.
3. Operating Instructions
Operating the speaker microphone is straightforward:
- Receiving Audio: Audio from your radio will be routed through the speaker on the microphone. Adjust the volume directly on your radio to control the output level of the speaker microphone.
- Transmitting Audio (Push-to-Talk): To transmit, press and hold the Push-to-Talk (PTT) button located on the side of the microphone. Speak clearly into the microphone. Release the PTT button to stop transmitting and return to receive mode.
- Noise Cancellation: The integrated noise cancellation microphone is designed to ensure clear voice transmission even in noisy environments. Speak directly into the microphone for optimal performance.
- Rotatable Clip: The clip on the back of the microphone can be rotated 360 degrees, allowing you to position the microphone conveniently for speaking and listening, regardless of where it is clipped.
Figure 3: The Push-to-Talk (PTT) button is ergonomically placed on the side for easy activation during transmission.
Figure 4: The sturdy, rotatable clip allows for secure and flexible attachment to clothing or gear.
4. Maintenance
To ensure the longevity and optimal performance of your TIDRADIO Speaker Microphone, consider the following maintenance tips:
- Cleaning: Wipe the microphone's exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the microphone in a cool, dry place when not in use. Avoid extreme temperatures or direct sunlight.
- Cable Care: Do not excessively pull or bend the cable, especially near the connectors, to prevent internal wire damage. The coiled design helps manage cable length and reduce tangles.
- Connector Protection: Keep the dual-pin connector clean and free of debris to ensure a reliable connection with your radio.
5. Troubleshooting
If you encounter issues with your speaker microphone, refer to the following common troubleshooting steps:
- No Sound from Speaker:
- Ensure the microphone's connector is fully inserted into the radio's port.
- Check the volume level on your radio; increase it if necessary.
- Test the radio's internal speaker to confirm the radio is functioning correctly.
- Unclear or Low Transmission:
- Ensure you are speaking directly into the microphone when pressing the PTT button.
- Verify that the PTT button is fully depressed during transmission.
- Check for any obstructions covering the microphone opening.
- Confirm your radio's settings are appropriate for transmission.
- Intermittent Connection:
- Inspect the cable and connectors for any visible damage or bends.
- Ensure the connector is clean and free of dust or debris.
If problems persist after attempting these steps, please contact customer support for further assistance.
6. Specifications
| Model Number | TD-MIC-1P |
| Connectivity | Auxiliary (Twin right angle: Ear 3.5mm stereo, Mic 2.5mm stereo) |
| Cable Length | Approximately 3 feet (914 mm) |
| Special Features | Rotatable Clip, Noise Cancellation Microphone |
| Color | BLACK |
| Item Weight | 3.2 ounces |
| Package Dimensions | 6.06 x 5.16 x 1.38 inches |
| Included Components | Speaker MIC |
| Manufacturer | TIDRADIO |
| Country of Origin | China |
| Date First Available | August 17, 2020 |
7. Warranty and Support
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official TIDRADIO website. Warranty terms and conditions may vary.
If you require technical support or have questions not covered in this manual, please contact TIDRADIO customer service through their official channels. Keep your product model number (TD-MIC-1P) and purchase details ready when contacting support.
