INNO STAGE F20-072AM-Black

INNO STAGE 21-inch Smokeless Fire Pit Instruction Manual

Model: F20-072AM-Black

Brand: INNO STAGE

1. Introduction

Thank you for choosing the INNO STAGE 21-inch Smokeless Fire Pit. This manual provides essential information for the safe and efficient use, assembly, and maintenance of your new fire pit. Please read all instructions carefully before use and retain this manual for future reference.

This fire pit features a patented double-wall design engineered to maximize airflow and combustion efficiency, resulting in significantly less smoke and more flame. It is designed for outdoor use with wood pellets or small pieces of wood, providing a warm and inviting ambiance for various outdoor activities.

2. Safety Warnings

  • Outdoor Use Only: This fire pit is intended for outdoor use only. Do not use indoors or in enclosed spaces.
  • Clearance: Maintain a safe distance from combustible materials, structures, and vegetation. Ensure adequate overhead clearance.
  • Stable Surface: Place the fire pit on a flat, level, non-combustible surface.
  • Supervision: Never leave a burning fire pit unattended. Keep children and pets away from the fire pit.
  • Fuel Type: Use only dry, seasoned wood or wood pellets. Do not use gasoline, kerosene, diesel fuel, lighter fluid, or alcohol to start or rekindle a fire.
  • Do Not Overfill: Do not overfill the fire pit with fuel.
  • Hot Surfaces: The fire pit becomes extremely hot during use and remains hot for a significant period afterward. Do not touch hot surfaces with bare hands. Use heat-resistant gloves.
  • Ash Disposal: Allow hot ash to cool down naturally. Do not extinguish with water to avoid thermal shock, which can cause peeling, rust, or damage to the product. Dispose of cooled ash safely.
  • Natural Patina: The whitening phenomenon after burning is a normal reaction and not a defect. Do not force cleaning to damage the product surface and cause paint peeling.
  • Emergency: Keep a fire extinguisher or a bucket of sand/water nearby in case of emergency.

3. Package Contents

Please ensure all components are present before assembly:

  • Fire Pit Body (2-tier structure)
  • Ash Tray
  • Portable Carrying Storage Bag

Note: Additional accessories like cooking grates or poker sticks may be sold separately or included in specific bundles.

4. Setup

The INNO STAGE Smokeless Fire Pit is designed for easy assembly. Simply place the two main parts together.

  1. Unpack Components: Carefully remove all parts from the packaging.
  2. Assemble Fire Pit Body: The fire pit consists of two main sections. Place the upper section onto the lower section, ensuring they fit securely. The portable handles are integrated into the upper section.
  3. Insert Ash Tray: Slide the ash tray into the designated slot at the bottom of the fire pit. This tray collects ash for easy disposal.
INNO STAGE Smokeless Fire Pit assembled outdoors
Figure 1: Assembled INNO STAGE Smokeless Fire Pit in an outdoor setting.
Diagram showing double wall airflow and bottom vent holes of the fire pit
Figure 2: Internal structure highlighting the double wall for maximized airflow and bottom vent holes for efficient combustion.

5. Operation

5.1 Fueling the Fire Pit

  • The INNO STAGE fire pit is designed for wood pellets or small pieces of wood/twigs.
  • Fill the fire pit with your chosen fuel, ensuring it does not exceed the top air vents.
Hand pouring wood pellets into the INNO STAGE Smokeless Fire Pit
Figure 3: Adding wood pellets to the fire pit for burning.

5.2 Lighting the Fire

  • Place a fire starter (e.g., natural fire starter, paper, kindling) at the bottom of the fuel.
  • Ignite the fire starter. The fire may take a few minutes to establish.
  • Once the fire is burning steadily and the fire pit heats up, the patented double-wall design will draw in air through the bottom vents, heat it, and release it through the top vents, creating a secondary combustion that burns off smoke.
INNO STAGE Smokeless Fire Pit with a roaring fire
Figure 4: The fire pit in full operation, showcasing the vibrant flames and minimal smoke.

5.3 Official Product Video

Video 1: Official demonstration of the INNO STAGE Smokeless Fire Pit in use, highlighting its wood pellet burning capabilities and low smoke output.

6. Maintenance & Cleaning

6.1 Ash Disposal

  • After use, allow the fire pit and ash to cool down completely and naturally. This may take several hours.
  • Once cooled, carefully remove the ash tray from the bottom of the fire pit.
  • Dispose of the ash in a non-combustible container.
  • Important: Do not use water to extinguish hot ash or to clean the fire pit while it is hot, as this can cause thermal shock, leading to peeling paint, rust, and damage.
Hand removing the ash tray from the bottom of the fire pit
Figure 5: The ash tray can be easily removed from the bottom of the fire pit for convenient ash disposal once cooled.

6.2 Cleaning and Storage

  • Clean the fire pit exterior with a soft cloth and mild detergent if necessary, only after it has completely cooled.
  • The whitening phenomenon after burning is a normal reaction and does not require aggressive cleaning.
  • Store the fire pit in a dry, covered area when not in use to prolong its lifespan. The included portable carrying bag is ideal for this purpose.
Side-by-side comparison of a new fire pit and one with natural patina after 100 days
Figure 6: Illustration of the natural patina that may develop on the fire pit over time with use, which is a normal characteristic.

7. Troubleshooting

  • Excessive Smoke: If you experience more smoke than expected, ensure you are using dry, seasoned wood or pellets. Wet or unseasoned wood produces more smoke. Also, ensure the fire pit has reached optimal operating temperature for the secondary combustion to fully engage. Do not overfill.
  • Difficulty Lighting: Ensure adequate kindling and airflow when starting the fire. Use appropriate fire starters.
  • Reduced Heat Output: Check for proper airflow. Ensure bottom vents are clear of ash or debris.

8. Specifications

FeatureSpecification
BrandINNO STAGE
Model NumberF20-072AM-Black
MaterialMetal
Product Dimensions20.75"D x 20.75"W x 18"H
Item Weight34 Pounds
Fuel TypeWood
ColorBlack
Finish TypePainted

9. Warranty & Support

For warranty information and customer support, please refer to the product packaging or contact INNO STAGE customer service directly. Keep your purchase receipt as proof of purchase.

© 2025 INNO STAGE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.