PIR IP65 Outdoor Infrared Motion Sensor User Manual

1. Product Overview

This eecoo PIR IP65 Outdoor Infrared Motion Sensor is designed to automatically control lighting based on detected human movement. It is suitable for various indoor and outdoor applications, providing convenience and enhancing safety by illuminating areas when needed.

Key features include an adjustable time setting for how long the light remains on after detection, a wide detection range, and a robust IP65 waterproof design, making it ideal for challenging outdoor environments.

Figure 1: Front view of the eecoo PIR IP65 Outdoor Infrared Motion Sensor.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries.

• Installation should only be performed by a qualified electrician or in accordance with local electrical codes.
• Ensure power is disconnected at the circuit breaker before performing any wiring or maintenance.
• Do not exceed the maximum rated load of 100W.
• This device is designed for AC 110-240V input. Verify your power supply matches this requirement.
• Avoid installing the sensor near heat sources, air conditioning vents, or in direct sunlight, as this may affect its performance.
• Do not disassemble or modify the sensor.

3. Product Features

• Motion Detection: Automatically switches connected lighting when human body movement is detected.
• Wide Detection Range: Features a 120-140 degree detection angle and a sensing distance of 3-12 meters.
• Adjustable Time Setting: Allows adjustment of the light-on duration after motion detection, typically from 10 seconds to 15 minutes.
• Day/Night Operation: Can be configured to operate only at night or throughout the day.
• Durable Design: IP65 rated for outdoor use, providing protection against dust and water jets.
• Versatile Application: Ideal for safety lighting in gardens, pathways, garages, warehouses, and other outdoor or indoor areas.

Figure 2: Illustration of the motion sensor's detection range and sensing area.

Figure 3: Schematic diagram detailing detection range, sensing range, installation height, and adjustable delay settings.

4. Package Contents

• 1 x eecoo PIR IP65 Outdoor Infrared Motion Sensor
• (Additional mounting hardware or screws may be included, but are not explicitly listed in product data.)

5. Setup and Installation

Important: Disconnect power at the main circuit breaker before beginning installation to prevent electric shock.

1. Choose Installation Location: Select a suitable location for the sensor. The recommended installation height is between 1.8 to 2.5 meters (approximately 5.9 to 8.2 feet) from the ground. Ensure the sensor has a clear line of sight to the area where motion is to be detected. Avoid placing it near large metal objects, heat sources, or areas with constant air movement.
2. Mount the Sensor: Securely mount the sensor to a wall or ceiling using appropriate screws and anchors (not explicitly listed as included).
3. Wiring Connection: Connect the sensor to your lighting circuit. Refer to the wiring diagram below.
   • Connect the Live wire (L) from your power supply to the sensor's Live input.
   • Connect the Neutral wire (N) from your power supply to the sensor's Neutral input.
   • Connect the Lamp wire (A) from the sensor to the Live input of your light fixture.
   • Ensure the Neutral wire of your light fixture is connected to the main Neutral line.
   

   Figure 4: Wiring diagram for connecting the motion sensor to a light fixture. Input: AC 110-240V.

4. Restore Power: Once all connections are secure, restore power at the circuit breaker.

6. Operating Instructions

The sensor is designed for automatic operation. After installation and power-up, it will begin detecting motion within its specified range.

Adjusting Settings:

The sensor typically features adjustable controls for time delay and light sensitivity (day/night operation). These controls are usually small dials or switches located on the sensor body.

• Time Delay (TIME): This setting determines how long the connected light remains on after motion is no longer detected. Adjust the dial to set the desired duration, typically ranging from 10 seconds to 15 minutes.
• Light Sensitivity (LUX): This setting controls the ambient light level at which the sensor becomes active.
  • Set to the "sun" icon for day and night operation (sensor active regardless of ambient light).
  • Set to the "moon" icon for night-only operation (sensor active only when ambient light is low).

Figure 5: The motion sensor detecting movement and activating lighting in an indoor setting.

Figure 6: A top-down representation of the 120-degree detection range of the sensor.

7. Maintenance

The eecoo PIR motion sensor requires minimal maintenance.

• Cleaning: Periodically wipe the sensor lens with a soft, dry cloth to remove dust or debris that may obstruct detection. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the wiring and mounting for any signs of wear, damage, or loose connections.
• Environmental Factors: Ensure the sensor is not obstructed by growing foliage or new structures that could block its detection path.

8. Troubleshooting

9. Specifications

Figure 7: Detailed dimensions of the eecoo PIR motion sensor.

Figure 8: Examples of various applications where the motion sensor can be used, including hallways, bathrooms, warehouses, and parking garages.

10. Warranty and Support

Specific warranty information and detailed customer support contacts are not available in the provided product data. For warranty claims, technical assistance, or further inquiries, please refer to the product packaging or contact the seller/manufacturer directly through their official channels.

You can visit the eecoo store on Amazon for more information: eecoo Store