LYFRO Flow Portable Smart Sensing Sanitising Mist Dispenser

Important Safety Information

Please read all safety instructions carefully before using the LYFRO Flow dispenser. Failure to follow these instructions may result in product damage or personal injury.

• Recommended Sanitiser: Use with 75% and above alcohol-based sanitiser for optimal disinfection results.
• Flammable Liquids: Do not smoke or expose the product to open flames or high heat sources when in use or when filled with alcohol. Alcohol is highly flammable.
• Children: Keep out of reach of children. Adult supervision is required if children are using the device.
• Liquid Type: Do not fill with corrosive liquids, gels, or thick lotions, as this may damage the atomization mechanism.
• Disassembly: Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.

Product Overview

The LYFRO Flow is a portable, smart sensing sanitising mist dispenser designed for convenient, touch-free hand sanitisation. It features advanced nanoscale atomisation for an ultra-fine mist and a leak-proof design.

Image: The LYFRO Flow dispenser demonstrating its intelligent touch-free sensor, automatically activating mist when hands are detected within range. The image highlights the 15-second maximum spray duration, 12cm auto-detection range, and 45ml capacity.

Key Features:

• Intelligent Touch-Free Sensor: Automatically activates or stops mist dispensing when objects are detected and removed within a range of up to 12cm.
• Portable Design: Compact size with an integrated 1800mAh battery, supporting usage on the go or while charging.
• Long Battery Life: Up to 6 hours of continuous use or approximately 1440 sprays (based on 15-second maximum spray per detection).
• Leak-Proof Design: Prevents liquid overflow and spills.
• Advanced Nanoscale Atomisation: Ensures thorough sanitisation with an ultra-fine mist.
• USB-C Charging: Convenient Type-C input (5V/1A) for rapid recharge.

Package Contents

Ensure all items are present in the package:

• 1 x LYFRO Flow Portable Smart Sensing Sanitising Mist Dispenser
• 1 x USB-A to USB-C Charging Cable (1 meter, white)
• 1 x User Manual (this document)

Setup

1. Charging the Device

1. Locate the USB-C charging port on the device.
2. Connect the provided USB-A to USB-C cable to the dispenser and a compatible 5V/1A USB power adapter (not included).
3. The indicator light will show charging status (e.g., red for charging, blue/green for fully charged).
4. A full charge provides up to 6 hours of continuous use or 1440 sprays.

Image: The LYFRO Flow dispenser being charged via its USB-C port, illustrating the rapid USB-C recharge capability and highlighting up to 6 hours of continuous use.

2. Filling the Sanitiser Tank

1. Gently twist and remove the top section of the dispenser to access the liquid tank.
2. Carefully pour liquid alcohol-based sanitiser (75% or higher concentration recommended) into the tank. Do not overfill; the capacity is 45ml.
3. Ensure the liquid level does not exceed the maximum fill line.
4. Replace the top section, ensuring it is securely twisted back into place to maintain the leak-proof seal.

Image: A view of the LYFRO Flow dispenser's base, showing the transparent refillable tank where sanitising liquid is stored. This illustrates the ease of refilling the 45ml capacity.

Operating Instructions

Using the Dispenser:

1. Place the LYFRO Flow dispenser on a flat, stable surface or hold it upright.
2. Ensure the device is charged and filled with sanitiser.
3. Position your hand or object within 12cm directly above the sensor area.
4. The intelligent sensor will detect your hand and automatically dispense a fine mist of sanitiser.
5. The dispenser will spray for a maximum of 15 seconds per detection. Remove your hand to stop spraying earlier.
6. Rub your hands together thoroughly to ensure complete sanitisation.

Image: The LYFRO Flow dispenser positioned next to a laptop, illustrating its portable size and suitability for various environments, emphasizing its leakproof design for peace of mind.

Maintenance

Cleaning the Device:

• Ensure the device is powered off or disconnected from charging before cleaning.
• Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• For the sensor area, gently wipe with a dry, soft cloth to ensure optimal performance.
• If the nozzle becomes clogged, try spraying a few times with fresh alcohol. If the issue persists, contact customer support.

Storage:

• When not in use for extended periods, empty the sanitiser tank and ensure the device is clean and dry.
• Store in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

Information regarding product warranty and customer support was not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for details on warranty coverage and how to contact customer support for service or inquiries.

Manufacturer Contact Information: UNIQ

Importer Contact Information: INFO@GOLIFESTYLERETAIL.COM