Philips Audio TAR3205 LED Clock Radio User Manual

Introduction

The Philips Audio TAR3205 LED Clock Radio is designed for simplicity and ease of use, providing essential features for your daily routine. This device includes a digital FM radio, dual alarm functionality, and a clear LED display. It is equipped with a sleep timer for comfortable listening and a gentle wake function for a smooth start to your day. A backup battery ensures your settings are retained during power outages.

Package Contents

• Philips Audio TAR3205 LED Clock Radio
• Power Adapter
• User Manual (this document)

Controls and Features

Figure 1: Front View. This image shows the front of the clock radio with its large, green LED display clearly showing the time. Indicators for Alarm 1 (AL1) and Alarm 2 (AL2) are visible on either side of the display.

Figure 2: Angled View. This image provides an angled perspective, highlighting both the LED display and the control buttons located on the top surface of the unit. The speaker grille is also visible on the top.

Figure 3: Top View. This image offers a clear overhead view of the clock radio, detailing all the control buttons: Power, SET TIME, PRESET, HR (Hour), MIN (Minute), TUN (Tune), VOL (Volume) +/-, AL1 (Alarm 1), AL2 (Alarm 2), SNOOZE, and SLEEP.

Button Functions:

• Power Button (⏻): Turns the unit on or off.
• SET TIME: Enters time setting mode.
• PRESET: Saves or recalls preset radio stations.
• HR (Hour): Adjusts the hour during time or alarm setting.
• MIN (Minute): Adjusts the minute during time or alarm setting.
• TUN (◀ / ▶): Tunes FM radio frequency.
• VOL (+ / -): Adjusts the volume level.
• AL1 (Alarm 1): Sets or activates Alarm 1.
• AL2 (Alarm 2): Sets or activates Alarm 2.
• SNOOZE/SLEEP: Snoozes an active alarm or activates the sleep timer function.

Setup

1. Power Connection

1. Connect the power adapter to the DC IN socket on the back of the clock radio.
2. Plug the power adapter into a wall outlet.
3. For backup power, insert 2 x AAA batteries (not included) into the battery compartment. This will preserve time and alarm settings during a power outage.

2. Setting the Time

1. Ensure the unit is powered on.
2. Press and hold the SET TIME button until the hour digits begin to flash on the display.
3. Press the HR button repeatedly to set the hour.
4. Press the MIN button repeatedly to set the minute.
5. Press the SET TIME button again to confirm and exit time setting mode.

3. Setting Alarms (AL1 and AL2)

The clock radio features two independent alarms, AL1 and AL2.

1. Press and hold the AL1 or AL2 button until the hour digits for that alarm begin to flash.
2. Press the HR button to set the desired alarm hour.
3. Press the MIN button to set the desired alarm minute.
4. Press the AL1 or AL2 button again to confirm the alarm time.
5. Immediately after setting the time, press the AL1 or AL2 button repeatedly to cycle through alarm modes:
   • FM: Wake up to FM radio.
   • Buzzer: Wake up to a standard buzzer sound.
   • OFF: Turn the alarm off.
6. The corresponding alarm indicator (AL1 or AL2) will light up on the display when the alarm is active.

4. FM Radio Tuning and Presets

1. Manual Tuning: Press the TUN ◀ or TUN ▶ buttons to manually tune to a desired FM frequency.
2. Automatic Scan: Press and hold the TUN ◀ or TUN ▶ buttons to automatically scan for the next available station.
3. Saving Presets:
   1. Tune to the desired station.
   2. Press and hold the PRESET button until the preset number flashes on the display.
   3. Use the TUN ◀ or TUN ▶ buttons to select the desired preset number (P01-P10).
   4. Press the PRESET button again to confirm and save the station.
4. Recalling Presets: Briefly press the PRESET button to cycle through your saved stations.

Operating

1. Using the Alarms

• When an alarm sounds, it will gradually increase in volume (Gentle Wake function).
• To stop the alarm for 24 hours, press the Power button. The alarm will reactivate at the same time the next day.
• To completely deactivate an alarm, follow the "Setting Alarms" steps and select "OFF" for the desired alarm.

2. Snooze Function

• When an alarm is sounding, press the large SNOOZE/SLEEP button. The alarm will pause for approximately 9 minutes and then sound again.

3. Sleep Timer

• While the radio is playing, press the SNOOZE/SLEEP button repeatedly to cycle through the sleep timer options (e.g., 120, 90, 60, 30, 15 minutes, OFF).
• The radio will automatically turn off after the selected duration.

4. Adjusting Volume

• Press the VOL + button to increase the volume.
• Press the VOL - button to decrease the volume.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the clock radio. Do not use abrasive cleaners or solvents.
• Battery Replacement: If the backup batteries are depleted, replace them with new AAA batteries to ensure time and alarm settings are saved during power interruptions.
• Storage: If storing the unit for an extended period, disconnect it from power and remove the backup batteries.

Troubleshooting

Specifications

• Model: TAR3205/05
• Brand: PHILIPS
• Display Type: Digital LED
• Power Source: AC Power (with DC adapter), 2 x AAA batteries for backup (not included)
• Radio Tuner: FM Digital
• Alarms: Dual Alarms (FM or Buzzer)
• Special Features: Sleep Timer, Snooze Function, Gentle Wake
• Dimensions (L x W x H): Approximately 5.16 x 5.16 x 2.13 inches (13.1 x 13.1 x 5.4 cm)
• Weight: Approximately 7.1 ounces (0.2 kg)
• Material: Plastic

Warranty and Support

This Philips product is covered by a limited warranty. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Philips support website. For technical support, troubleshooting assistance, or service inquiries, please contact Philips customer support through their official channels.

Please retain your proof of purchase for warranty claims.