VASAGLE Bar Stools ULBC069B81 Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, safe use, and maintenance of your new VASAGLE Bar Stools (Model: ULBC069B81). Please read all instructions carefully before assembly and use to ensure proper function and safety.

Image 1.1: VASAGLE Bar Stools (Model ULBC069B81)

Image 1.2: Bar stools in a kitchen environment

2. Safety Information

Adherence to the following safety guidelines is crucial for preventing injury and damage to the product.

• Ensure the stool is used by one person at a time.
• The maximum weight capacity for each stool is 220 lb (100 kg). Do not exceed this limit.
• Always ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the stools.
• Keep children away during assembly. Small parts may pose a choking hazard.
• Place stools on a flat, stable surface to prevent tipping.

3. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 2 x Bar Stools (disassembled)
• 1 x Assembly Kit (includes screws, wrench, etc.)
• 1 x Instructions Manual (this document)

4. Assembly Instructions

Assembly is designed to be straightforward. Follow these steps carefully. An assembly tool is included.

Image 4.1: Assembly Diagram

1. Identify Parts: Lay out all components and compare them with the assembly diagram (Image 4.1) and the parts list in your physical manual. Ensure all parts (A, B, C, D, E, F, G) are accounted for.
2. Attach Seat to Frame: Secure the upholstered seat (A) to the upper frame (F) using the provided screws. Do not fully tighten yet.
3. Attach Backrest: Connect the backrest (B) to the upper frame (F) using the designated screws. Do not fully tighten yet.
4. Assemble Legs: Attach the leg frames (D and E) to the upper frame (F). Ensure the legs are oriented correctly.
5. Install Footrest Ring: Connect the footrest ring (C) to the leg frames (D and E) using the remaining screws (G). This ring provides structural integrity and a comfortable footrest.
6. Final Tightening: Once all parts are loosely assembled, place the stool on a flat surface. Gradually tighten all screws evenly until secure. Avoid over-tightening.

Image 4.2: Strong Structure for Stability

Image 4.3: Non-Slip Footpads

5. Usage

These bar stools are designed for use at bar-height tables or counters. Their compact design allows them to be tucked away when not in use, optimizing space.

• Seating Comfort: The stools feature well-padded PU leather upholstered seats and low backrests for comfortable seating.
• Footrest: Utilize the integrated footrest for added comfort and support.
• Placement: Ideal for bar tables or kitchen counters with a height of 40-43 inches (100-110 cm).

Image 5.1: Sizing Guide for Optimal Use

Image 5.2: Attached Footrest for Comfort

Image 5.3: Curved Backrest for Support

Image 5.4: PU-Upholstered Seat Features

6. Maintenance

Proper care will extend the life and appearance of your bar stools.

• Cleaning: Wipe with a dry cloth to clean the metal frame and rustic brown backrest. For the PU upholstered seat, use a damp cloth with mild soap if necessary, then wipe dry immediately. Avoid harsh chemicals.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
• Placement: Avoid prolonged exposure to direct sunlight or extreme humidity, which can affect the materials.

7. Troubleshooting

If you encounter any issues with your bar stools, refer to the following common solutions:

• Wobbling Stool: Ensure the stool is on a flat, even surface. Check and tighten all assembly screws. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned before tightening.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure all parts are correctly oriented as shown in the diagram. Do not fully tighten screws until all components are loosely fitted.
• Missing Parts: If any parts were missing from the package, please contact VASAGLE customer support for assistance.

8. Specifications

Detailed product specifications for the VASAGLE Bar Stools ULBC069B81:

Image 8.1: Product Dimensions and Weight Capacity

9. Warranty and Support

VASAGLE products are manufactured with quality and customer satisfaction in mind. For warranty information, product support, or to report missing/damaged parts, please refer to the contact information provided with your purchase or visit the official VASAGLE website.

Please retain your proof of purchase for any warranty claims.