1. Introduction
This manual provides essential information for the proper handling, display, and care of your Funko POP! Marvel #672 - Spider-Man [with Pizza] Exclusive collectible figure. This figure is a stylized vinyl representation of Spider-Man, featuring him holding a slice of pizza, and is intended for display purposes.
Please read these instructions carefully to ensure the longevity and preservation of your collectible.
2. Setup and Unboxing
Your Funko POP! figure comes packaged in a protective display box. Follow these steps for safe unboxing and initial setup:
- Inspect Packaging: Before opening, examine the outer packaging for any signs of damage.
- Careful Opening: Gently open the top or bottom flaps of the box. Avoid tearing the packaging, as the box itself is often part of the collectible's value.
- Remove Figure: Carefully slide the plastic insert containing the figure out of the box.
- Detach Figure: Remove the figure from its plastic casing. Some figures may have a clear plastic stand attached to their feet; ensure this is securely fitted if present.
Image 2.1: The Funko POP! Marvel #672 Spider-Man with Pizza figure, both inside its original packaging and displayed outside the box on a clear stand.
3. Display and Handling
This Funko POP! figure is designed for static display. Proper placement and handling are crucial for its preservation.
- Display Location: Place the figure on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity. Direct sunlight can cause paint fading over time.
- Avoid Moisture: Keep the figure away from liquids and damp environments to prevent damage to the paint or material.
- Secure Placement: Ensure the figure is placed where it cannot be easily knocked over, especially if it has a small base.
- Gentle Handling: When moving or adjusting the figure, hold it by its main body. Avoid applying pressure to smaller, delicate parts like the pizza slice or web-shooters.
4. Maintenance and Cleaning
Regular, gentle cleaning will help maintain the appearance of your Funko POP! figure.
- Dusting: Use a soft, dry brush (such as a clean makeup brush or a soft-bristled paintbrush) or a microfiber cloth to gently remove dust from the figure's surface.
- Spot Cleaning: For minor smudges, lightly dampen a cotton swab with distilled water and gently wipe the affected area. Avoid harsh chemicals or abrasive cleaners, as these can damage the paint finish.
- Avoid Immersion: Do not submerge the figure in water or any cleaning solutions.
5. Troubleshooting
While Funko POP! figures are generally robust, minor issues can sometimes occur.
| Issue | Possible Cause | Solution |
|---|---|---|
| Figure does not stand stably. | Base not properly attached, uneven surface, or slight manufacturing variation. | Ensure the clear plastic stand (if included) is firmly inserted into the figure's feet. Place on a completely flat surface. If the issue persists, contact Funko support. |
| Minor paint imperfection. | Standard manufacturing variation. | Minor paint variations are common in mass-produced collectibles. If the imperfection is significant, refer to the warranty information. |
| Figure feels sticky or oily. | Residue from manufacturing or environmental factors. | Gently wipe with a slightly damp microfiber cloth. Avoid harsh solvents. |
6. Product Specifications
- Brand: Funko
- Model Number: 49911
- Product Dimensions: 2.36 x 1.57 x 3.15 inches (approximately)
- Item Weight: 7.8 ounces (approximately)
- Material: Vinyl
- ASIN: B08F9MNM4H
- Date First Available: August 5, 2020
7. Warranty and Support
Funko products are manufactured to high-quality standards. For specific warranty information or support regarding manufacturing defects, please refer to the official Funko website or contact their customer service directly.
Keep your proof of purchase for any warranty claims.
Funko Official Website: www.funko.com