Ubiquiti Networks U-POE-af 802.3af PoE Injector Instruction Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Ubiquiti Networks U-POE-af 802.3af Power over Ethernet (PoE) Injector. Please read these instructions carefully before using the device to ensure optimal performance and safety.

Package Contents

• Ubiquiti Networks U-POE-af PoE Injector
• Power Cord
• Wall Mount Bracket (removable)

Setup

Follow these steps to connect your U-POE-af PoE Injector:

1. Connect the Power Cord: Plug the provided power cord into the power input of the U-POE-af injector and then into a standard electrical outlet. The LED indicator on the injector should illuminate, indicating power.
2. Connect to Network (LAN): Connect an Ethernet cable from your network switch or router to the port labeled LAN on the PoE injector. This port carries data from your network.
3. Connect to PoE Device: Connect another Ethernet cable from the port labeled PoE on the injector to your PoE-compatible device (e.g., access point, IP camera, VoIP phone). This port delivers both data and power to the connected device.

This image displays the Ubiquiti Networks U-POE-af PoE Injector. The device is white and rectangular, featuring two Ethernet ports on one end. One port is labeled 'LAN' and the other 'PoE', with a red lightning bolt icon next to 'PoE' indicating power output. The top surface shows the Ubiquiti logo and 'U-POE-af' text.

Optional Wall Mounting: The injector includes a removable bracket on the back for wall mounting. To mount, detach the bracket, secure it to the wall using appropriate fasteners (not included), and then slide the injector onto the mounted bracket.

Operating Instructions

Once properly connected, the U-POE-af injector will automatically provide power and data to your connected PoE-compatible device. The blue LED indicator on the injector signifies that the unit is powered on and operational.

The injector supports the 802.3af PoE standard, delivering up to 15 watts of power. Ensure your connected device is compatible with this standard to avoid damage or malfunction.

Maintenance

• Keep the device in a dry, well-ventilated area.
• Clean the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Ensure all cable connections are secure and free from damage.

Troubleshooting

No Power to Device:

• Verify the power cord is securely plugged into both the injector and the electrical outlet.
• Check if the blue LED indicator on the injector is illuminated. If not, try a different outlet.
• Ensure the connected device is PoE-compatible and adheres to the 802.3af standard.
• Inspect the Ethernet cable connecting the injector's PoE port to your device for damage.

No Data Connection:

• Confirm the Ethernet cable from your network switch/router is securely connected to the injector's LAN port.
• Check the Ethernet cable connecting the injector's PoE port to your device for proper connection and integrity.
• Verify that your network switch/router is functioning correctly.

Specifications

Warranty Information

Ubiquiti Networks products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Ubiquiti Networks website or the warranty card included with your purchase. Keep your proof of purchase for warranty claims.

Support

For technical assistance, product inquiries, or further support, please visit the official Ubiquiti Networks support portal or contact their customer service. Resources such as FAQs, documentation, and community forums are often available online.

Note: Always refer to the latest documentation available on the manufacturer's website for the most up-to-date information.