1. Introduction
Thank you for choosing the Timber Ridge Oversized Zero Gravity Chair. This manual provides essential information for the safe and effective use, maintenance, and care of your new chair. Please read all instructions carefully before use and retain this manual for future reference.
This chair is designed for comfort and durability, featuring a heavy-duty frame that supports up to 350 pounds. Its fully padded design offers maximum comfort, relieving pressure and enhancing relaxation. The chair extends to 72 inches when fully reclined and offers spacious dimensions of 43.25"(H) x 24"(W) x 22"(D) when unfolded, with a 20.5-inch seat height.
2. Setup
The Timber Ridge Oversized Zero Gravity Chair requires no assembly. It is designed for immediate use straight out of the box.
Unfolding the Chair:
- Carefully remove the chair from its packaging.
- Gently pull the chair's frame apart until it fully extends into the upright seating position.
- Ensure all locking mechanisms are disengaged before unfolding.
Folding the Chair for Storage:
- Return the chair to its upright, non-reclined position.
- Disengage any locking mechanisms.
- Push the front and back frames together until the chair folds flat.
- The folded dimensions are approximately 28.4" x 6.4" x 36", allowing for effortless storage and portability.
3. Operating Instructions
Adjusting Recline Position:
The chair features a patented locking system that allows adjustment from 0 to 170 degrees. To recline:
- Sit comfortably in the chair.
- Lean back slowly to your desired recline angle.
- Once at the desired angle, locate the locking levers on both armrests.
- Push the levers down to engage the lock and secure the chair in position.
- To adjust or return to an upright position, lift the levers to unlock and gently shift your weight.
Adjustable Headrest:
The chair includes an adjustable headrest for tailored support from neck to waist. The headrest can be slid up or down along the back of the chair to suit your preference, or removed entirely if not needed.
Using the Removable Side Table:
A convenient side tray is included to keep your drinks, snacks, and personal items close by. This table is designed to attach to the side of the chair frame. To attach, align the table's clips with the designated slots on the chair's armrest frame and press firmly until it clicks into place. Ensure it is securely fastened before placing items on it. The side table can be easily removed for storage or when not in use.
4. Maintenance
Proper care and maintenance will extend the life of your Timber Ridge Zero Gravity Chair.
Cleaning:
- Wipe down the fabric and frame with a damp cloth and mild soap.
- Rinse thoroughly with clean water.
- Allow to air dry completely before folding and storing.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the fabric and frame finish.
Storage:
- When not in use, especially during inclement weather or off-season, store the chair in a dry, protected area.
- Folding the chair flat helps save space during storage.
5. Troubleshooting
If you encounter any issues with your chair, please refer to the following common solutions:
- Chair not reclining smoothly: Check for any obstructions in the reclining mechanism. Ensure the locking levers are fully disengaged.
- Chair not staying in reclined position: Ensure both locking levers on the armrests are fully engaged by pushing them down firmly.
- Side table feels loose: Re-attach the side table, ensuring the clips are properly aligned and fully snapped into the chair frame.
For further assistance, please contact customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | TIMBER RIDGE |
| Model Name | Padded Reclining Lounge Chair with Adjustable Headrest & Cup Holder |
| Product Dimensions (Unfolded) | 22"D x 24"W x 43.5"H |
| Seat Height | 20.5 inches (from feature bullets) |
| Maximum Weight Recommendation | 350 Pounds |
| Material | Alloy Steel (Frame), Foam, Polyester (Fill) |
| Color | Brown-1 Pack |
| Special Features | Adjustable Backrest, Adjustable Headrest, Arm Rest, Cup Holders, Foldable |
| Reclining Position Count | Multiple (0 to 170 degrees) |
| Is Foldable | Yes |
| Assembly Required | No |
7. Safety Warnings
WARNING:
- Always ensure the chair is fully unfolded and stable before use.
- Do not exceed the maximum weight capacity of 350 pounds.
- Keep fingers and other body parts away from the reclining mechanism when adjusting position.
- Never leave the chair in the reclined position unattended.
- Always follow the manufacturer's instructions for proper use and assembly.
8. Warranty & Support
This Timber Ridge product comes with a 1-year manufacturer's warranty. For warranty claims, product support, or any questions not covered in this manual, please contact Timber Ridge customer service.
9. Product Media
Images:


















