Elefloom HHH-222
Elefloom Linear Shower Drain User Manual
Model: HHH-222
1. Introduction
Thank you for choosing the Elefloom Linear Shower Drain. This product is engineered from high-quality AISI 304 stainless steel, designed for superior durability, corrosion resistance, and efficient water drainage. Its modern design integrates seamlessly into various environments, including bathrooms, kitchens, garages, basements, and toilets. This manual provides essential information for the proper installation, operation, and maintenance of your linear shower drain to ensure long-lasting performance.

Figure 1.1: Elefloom Linear Shower Drain seamlessly integrated into a shower floor.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these guidelines may result in property damage or injury.
- Professional Installation: It is highly recommended that installation be performed by a qualified professional to ensure proper function and compliance with local plumbing codes.
- Water Sealing: Ensure all connections are properly sealed to prevent leaks and water damage.
- Material Handling: Handle the stainless steel components with care to avoid scratches or damage.
- Chemical Exposure: Avoid using harsh chemicals or abrasive cleaners that could damage the stainless steel finish.
3. Product Overview and Components
The Elefloom Linear Shower Drain system consists of several key components designed for efficient and reliable performance.

Figure 3.1: Exploded view of the linear shower drain components.
Components:
- Drain Channel: The main body of the drain, featuring a deep X-shaped diversion for rapid water flow.
- Removable Grate Cover: The top cover with square perforations, allowing water to pass while preventing large debris.
- Hair Catcher: A removable basket designed to collect hair and small debris, preventing clogs.
- Leveling Feet: Adjustable feet for precise height and slope adjustment during installation.
- Lifting Hook: A small tool provided for easy removal of the grate cover for cleaning and maintenance.
4. Setup and Installation
Proper installation is critical for the optimal performance of your linear shower drain. Consult with a professional plumber or contractor for installation to ensure compliance with all local building and plumbing codes.
Key Installation Considerations:
- Floor Slope: Unlike traditional center drains, the Elefloom Linear Shower Drain requires the shower floor to be sloped in only one direction towards the drain, simplifying the tiling process.
- Drain Base Compatibility: This linear shower drain is designed to be fully compatible with standard shower drain bases.
- Leveling: Utilize the adjustable leveling feet to ensure the drain is perfectly level and at the correct height relative to the finished floor.
- Waterproofing: Ensure proper waterproofing membranes are installed around the drain area to prevent water penetration.
- Connection: Securely connect the drain outlet to your plumbing system, ensuring all seals are watertight.

Figure 4.1: Example of the linear drain installed in a shower setting.
5. Operating Principles
The Elefloom Linear Shower Drain operates passively, relying on gravity and its intelligent design to efficiently remove water from your shower area.
- Fast Drainage: The drain features a deep X-shaped diversion and a high-capacity water storage space, allowing for a rapid flow rate of up to 60 liters per minute. This design minimizes water accumulation and helps keep your bathroom floor dry.
- Deep Shaped "V" Design: The internal V-shaped design of the channel further increases water flow rate and helps eliminate residual water, preventing stagnant water and potential odors.

Figure 5.1: Illustration of the Deep Shaped "V" design for enhanced drainage.
6. Maintenance
Regular cleaning of your Elefloom Linear Shower Drain is essential to maintain optimal drainage performance and prevent clogs.
Cleaning Procedure:
- Remove Grate Cover: Use the provided lifting hook to carefully remove the grate cover from the drain channel.
- Remove Hair Catcher: Lift out the hair catcher basket from the drain channel.
- Clean Components: Rinse the hair catcher and the underside of the grate cover thoroughly with water to remove accumulated hair and debris. For stubborn residue, a mild soap solution and a soft brush can be used.
- Clean Drain Channel: Inspect the drain channel for any debris and rinse it out.
- Reassemble: Place the clean hair catcher back into the drain channel, then replace the grate cover, ensuring it sits flush.
Frequency: It is recommended to clean the hair catcher every 3 weeks, or more frequently depending on usage and hair accumulation, to prevent clogging and maintain efficient drainage.
7. Troubleshooting
If you encounter issues with your Elefloom Linear Shower Drain, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Drainage | Accumulation of hair and debris in the hair catcher or drain channel. | Perform the cleaning procedure outlined in Section 6. Ensure the hair catcher is clear and the channel is free of obstructions. |
| Water Accumulation on Floor | Improper floor slope towards the drain; drain not level. | Verify that the shower floor has a consistent slope towards the linear drain. If necessary, consult a professional to adjust the drain's leveling feet or floor slope. |
| Unpleasant Odors | Stagnant water or debris in the drain; dry P-trap. | Clean the drain thoroughly. Ensure the P-trap (part of your plumbing system) always contains water to block sewer gases. If the shower is rarely used, run water periodically to refill the P-trap. |
8. Specifications
Detailed technical specifications for the Elefloom Linear Shower Drain (Model HHH-222).

Figure 8.1: Product dimensions and available sizes.
- Model: HHH-222
- Material: AISI 304 Stainless Steel
- Color: Stainless Steel
- Finish Type: Stainless Steel
- Product Dimensions (for 24 inch model): 24"W x 24"H (Note: 24"W refers to length, 24"H refers to overall height including pipe connection, actual channel height is 2.5")
- Item Weight: 3.99 pounds
- Special Feature: AISI 304 Stainless Steel to Prevent Rust and Clogging with CUPC certification
- Style: Contemporary
- Flow Rate: 60 Liters/Minute (L/min)
- UPC: 738634263545

Figure 8.2: Quality and certification details.
9. Warranty and Support
Elefloom is committed to providing high-quality products and customer satisfaction. Your linear shower drain is manufactured to stringent quality standards.
- Missing Parts: If you find any part you need missing from your shower drain package, please do not hesitate to contact us directly. Replacement parts will be sent to you free of charge.
- Customer Service: For any questions, concerns, or support needs regarding your Elefloom Linear Shower Drain, please contact Elefloom customer service through the retailer where you purchased the product or visit the official Elefloom store online.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.