Product Overview
The GINTOOYUN 12V 24V DC 5.5mm x 2.1mm Car Cigarette Lighter Extension Power Supply Adapter Cable is designed to provide extended power connectivity for various electronic devices in vehicles. This cable features a male car cigarette lighter plug on one end and a DC 5.5mm x 2.1mm male plug on the other, making it compatible with a wide range of portable electronics.
Key features include:
- Wide Voltage Compatibility: Supports 12V to 24V DC input.
- Standard DC Connector: Equipped with a 5.5mm x 2.1mm DC plug, tip positive.
- Safety Features: Built-in replaceable 10A fuse (model F10AL250V) for circuit protection.
- Durable Construction: Made with ABS plastic shell and high-quality pure copper wire for stable transmission.
- LED Indicator: A red LED light indicates operational status.
Image: The GINTOOYUN 12V 24V DC 5.5mm x 2.1mm Car Cigarette Lighter Extension Power Supply Adapter Cable, showing the cigarette lighter plug and the DC 5.5mm x 2.1mm connector.
Setup Instructions
- Verify Compatibility: Before connecting, ensure your device requires a DC 5.5mm x 2.1mm male connector and operates within the 12V-24V DC range. Confirm the polarity of your device matches the cable's tip-positive configuration.
- Connect to Vehicle Power: Insert the male car cigarette lighter plug firmly into your vehicle's 12V or 24V cigarette lighter socket. The red LED indicator on the plug should illuminate, indicating power is being supplied.
- Connect to Device: Insert the DC 5.5mm x 2.1mm male plug into the corresponding power input port of your electronic device.
Image: Close-up view of the DC 5.5mm x 2.1mm connector, illustrating its dimensions and the tip-positive polarity.
Operating Instructions
This power adapter cable is designed for plug-and-play operation. Once properly connected to both the vehicle's cigarette lighter socket and your electronic device, power will be supplied automatically.
- LED Indicator: The red LED light on the cigarette lighter plug serves as a visual indicator. When the cable is correctly inserted into a powered cigarette lighter socket, the LED will light up, confirming that power is flowing through the cable. If the LED is not lit, check the connection or refer to the troubleshooting section.
- Usage: The cable is suitable for powering various devices such as portable car air pumps, DVD players, GPS units, Bluetooth speakers, and LED light strips.
Image: A visual representation of various devices compatible with the GINTOOYUN power cable, including a car subwoofer, car DVR, car monitor, portable DVR player, portable on-board air pump, and radio.
Maintenance
To ensure optimal performance and longevity of your GINTOOYUN power cable, follow these maintenance guidelines:
- Cleaning: Keep the connectors clean and free from dust or debris. Use a dry, soft cloth to wipe the cable and connectors. Do not use liquid cleaners.
- Storage: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly coiling the cable.
- Fuse Replacement: The cable features a built-in replaceable 10A fuse (model F10AL250V) for protection. If the cable stops working and the LED indicator does not light up, the fuse may need replacement.
Fuse Replacement Procedure:
- Unplug the cigarette lighter adapter from the vehicle's socket.
- Unscrew the metal cap at the tip of the cigarette lighter plug.
- Carefully remove the old fuse.
- Insert a new 10A fuse (model F10AL250V) into the fuse holder.
- Screw the metal cap back on securely.
- Test the cable by plugging it back into the vehicle's cigarette lighter socket. The LED should illuminate.
Image: An exploded view diagram of the cigarette lighter plug, highlighting components such as the copper spring, metal contact, fuse nut, fuse (F10AL250V), plastic shell, shell ring, screw, and red LED indicator light.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cable not providing power / LED not lit | Loose connection in vehicle socket | Ensure the cigarette lighter plug is fully and securely inserted into the vehicle's socket. |
| Cable not providing power / LED not lit | Blown fuse in the cigarette lighter plug | Replace the 10A fuse (model F10AL250V) as described in the Maintenance section. |
| Cable not providing power / LED not lit | Vehicle's cigarette lighter socket is not powered | Check your vehicle's fuse box for the cigarette lighter fuse. Consult your vehicle's manual. |
| Device not powering on | Incorrect DC connector size or polarity for your device | Verify that your device requires a DC 5.5mm x 2.1mm connector with tip-positive polarity. This cable is not compatible with other sizes or polarities. |
| Device not powering on | Device power requirements exceed cable's capacity | Ensure your device's current draw does not exceed 10A and voltage is within 12V-24V. |
Technical Specifications
| Feature | Specification |
|---|---|
| Input Voltage | 12V - 24V DC |
| Connector A | Car Cigarette Lighter Male Plug |
| Connector B | DC 5.5mm x 2.1mm Male Plug (Tip Positive) |
| Rated Current | 10 Amps (Max) |
| Fuse Type | Replaceable 10A (F10AL250V) |
| Conductor Specification | 18 AWG Copper Wire |
| Cable Length | Approximately 10 feet (3 meters) |
| Material | ABS Plastic Shell, PVC Wire Jacket |
| Color | Black |
| Item Weight | 4.4 ounces |
Image: A diagram illustrating the dimensions of the DC 5.5mm x 2.1mm connector (40mm length, 5.5mm outer diameter, 2.1mm inner diameter) and the cigarette lighter plug (90mm length, 20mm width), along with the overall cable length of 3 meters (approximately 10 feet).
Package Contents
- 1x DC 5.5mm x 2.1mm Car Cigarette Lighter Cable
Warranty and Support
For any questions, concerns, or technical support regarding your GINTOOYUN 12V 24V DC 5.5mm x 2.1mm Car Cigarette Lighter Extension Power Supply Adapter Cable, please contact the manufacturer or your point of purchase. Please refer to your purchase documentation for specific warranty details and contact information.