Introduction
This user manual provides essential information for the safe and proper use, assembly, and maintenance of your Infanti Sky TS Travel System Stroller. This system includes a stroller, an infant car seat (Narni model), and a vehicle base. Please read all instructions carefully before assembly and use, and keep this manual for future reference.
The Infanti Sky TS Travel System is designed for children from birth up to 15 kg for the stroller and up to 13 kg for the infant car seat (Group 0+). It features an aluminum frame, 3 wheels, a reversible bassinet seat, and a UV+ protected canopy.
1. Setup and Assembly
1.1 Unpacking
Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. Retain packaging for potential future transport or storage.
1.2 Stroller Frame Assembly
- Unfold the Stroller Frame: Place the folded stroller on a flat surface. Release the folding latch and lift the handlebar until the frame locks into place. Ensure both sides are securely locked.
- Attach Wheels: Insert the rear wheels into their designated slots on the frame until they click. Attach the front wheel by aligning it with the front fork and pushing it firmly until it locks.
- Adjust Handlebar: The integrated handlebar has height adjustment. Press the buttons on the sides of the handlebar and adjust to your desired height. Release the buttons to lock.
- Attach Storage Basket: Secure the storage basket to the designated attachment points on the lower frame.
Image: Side view of the Infanti Sky TS Stroller, showing the frame and wheels. This image illustrates the assembled stroller frame.
1.3 Stroller Seat Assembly (Bassinet/Reversible Seat)
- Attach Seat Unit: Align the seat unit with the attachment points on the stroller frame. Push down firmly until you hear a click, indicating it is securely locked.
- Reverse Seat Direction: The seat can face forward or backward. To reverse, press the release buttons on both sides of the seat unit, lift, rotate, and reattach until it clicks.
- Convert to Bassinet Mode: For newborns, the seat can be converted into a bassinet. Follow the specific instructions in the included seat manual for this conversion, typically involving adjusting straps and supports to create a flat sleeping surface.
- Attach Canopy: Secure the canopy to the seat unit. Ensure it is fully extended for UV+ protection.
- Attach Bumper Bar: Insert the bumper bar into the designated slots on the seat unit until it clicks.
Image: The Infanti Sky TS Stroller configured in bassinet mode, suitable for newborns. This shows the seat fully reclined and enclosed.
Image: A hand demonstrating the attachment of the bumper bar to the stroller seat. This illustrates how to secure the bumper bar.
1.4 Infant Car Seat (Narni) and Vehicle Base Installation
1.4.1 Car Seat to Stroller Frame Installation
- Ensure the stroller seat is removed from the frame.
- Align the Narni infant car seat with the attachment points on the stroller frame.
- Push down firmly until the car seat clicks securely into place. Verify stability by gently pulling upwards.
Image: The Infanti Narni infant car seat securely attached to the Sky TS stroller frame, viewed from the front. This shows the car seat in travel system configuration.
Image: Side view of the Infanti Narni infant car seat attached to the Sky TS stroller frame. This provides another angle of the car seat on the stroller.
1.4.2 Vehicle Base Installation (ISOFIX or Seat Belt)
The vehicle base can be installed using either the ISOFIX system or the vehicle's 3-point seat belts. Always refer to your vehicle's owner's manual for specific car seat installation instructions.
- ISOFIX Installation: Locate the ISOFIX anchors in your vehicle. Extend the ISOFIX connectors on the base and attach them to the vehicle anchors until they click and the indicators turn green. Extend the front leg (load leg) to the vehicle floor for stability.
- Seat Belt Installation: Route the vehicle's 3-point seat belt through the designated belt paths on the base. Buckle the seat belt and ensure it is tight, removing all slack. Use the plumb indicator on the base to ensure the correct recline angle.
- Attach Infant Car Seat to Base: Place the Narni infant car seat onto the installed vehicle base. Push down firmly until it clicks into place. Verify the secure attachment by pulling upwards on the car seat.
2. Operating Instructions
2.1 Stroller Operation
- Securing Your Child: Always use the 5-point safety harness. Adjust the shoulder straps to the appropriate height for your child. Fasten the buckle and ensure straps are snug but not too tight.
- Reclining the Seat: The stroller seat offers multiple recline positions (up to 4). Locate the recline mechanism (usually a lever or button on the back of the seat) and adjust to the desired angle.
- Braking: The stroller features a centralized brake on the rear wheels. Press the brake pedal down to engage the brake. Lift it up to release. Always engage the brake when the stroller is stationary.
- Front Wheel Swivel Lock: The front wheel has a swivel control. Engage the lock for straight-line travel on uneven terrain, and disengage for greater maneuverability.
- Folding the Stroller: To fold, ensure the seat is facing forward (if applicable) and in its most upright position. Follow the specific folding mechanism instructions, typically involving pressing release buttons and pushing the handlebar down until the stroller collapses and locks. The seat can be folded with the frame.
Image: Front view of the Infanti Sky TS Stroller, highlighting the 5-point harness system and seat design. This shows how a child would be secured.
2.2 Infant Car Seat (Narni) Operation
- Securing Your Child: Place your child in the car seat. Fasten the 3-point safety harness. Adjust the shoulder straps to be at or below your child's shoulders. Ensure the harness is snug.
- Handle Adjustment: The Narni car seat handle has 5 adjustable positions. Press the buttons on the sides of the handle to adjust it for carrying, rocking, or vehicle installation.
- Canopy: The car seat includes a retractable and removable canopy for sun protection.
3. Maintenance and Care
3.1 Cleaning
- Fabric Parts: The fabric covers for both the stroller and car seat are machine washable. Refer to the care labels for specific temperature and cycle recommendations. Use mild detergent.
- Frame and Plastic Parts: Wipe clean with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- Wheels: Regularly clean wheels to remove dirt and debris. Lubricate moving parts (axles, swivel mechanisms) with a silicone-based lubricant if needed.
3.2 Storage
Store the travel system in a dry, cool place away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storage to prevent mold or mildew.
3.3 Regular Checks
Periodically check all fasteners, rivets, and stitching for security and wear. Ensure all locking mechanisms function correctly. Replace any worn or damaged parts immediately. Do not use the product if any part is broken or missing.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stroller does not fold/unfold smoothly. | Folding mechanism is jammed or not fully disengaged/engaged. | Ensure all locks are released before folding. Apply light lubricant to moving parts if stiff. Check for obstructions. |
| Wheels squeak or are difficult to turn. | Dirt or debris in wheel bearings; lack of lubrication. | Clean wheels and axles. Apply silicone-based lubricant to moving parts. |
| Car seat does not click into stroller frame or vehicle base. | Incorrect alignment; obstruction; locking mechanism not fully engaged. | Ensure correct orientation and alignment. Push down firmly until a click is heard. Check for debris in connectors. |
| Harness is difficult to adjust. | Straps are twisted or buckle is stiff. | Untwist straps. Ensure no fabric is caught in the buckle. Clean buckle if necessary. |
5. Product Specifications
- Model: Infanti Sky TS Travel System
- Stroller Weight Capacity: Up to 15 kg
- Infant Car Seat Weight Capacity (Narni): Up to 13 kg (Group 0+)
- Age Range (Stroller): From birth (with bassinet mode) up to approximately 3 years (15 kg)
- Age Range (Car Seat): From birth up to approximately 1 year (13 kg)
- Materials: Aluminum (frame), Polyurethane, Polyester (fabrics)
- Harness Type (Stroller): 5-point adjustable harness
- Harness Type (Car Seat): 3-point adjustable harness
- Product Dimensions (Stroller): 50 x 60 x 86 cm (L x W x H)
- Product Weight (Stroller): 8.6 kg
- Care Instructions: Machine washable fabrics
- Safety Standards: INMETRO (ABNT NBR 14389 for stroller, ABNT NBR 14400 for car seat)
- Manufacturer Reference: CAX00466
- ASIN: B08DWXXWM6
- EAN: 7908238801754
6. Warranty Information
Specific warranty details for the Infanti Sky TS Travel System are not provided in this manual. Please refer to the warranty card included with your purchase or contact Infanti customer support for comprehensive warranty information.
7. Customer Support
For further assistance, spare parts, or inquiries not covered in this manual, please contact Infanti customer support. Visit the official Infanti website for contact details and additional resources.
You can find more information on the Infanti Brand Store on Amazon.