JEENDA Bob-Tach Lever Kit 6724776 6724775 Instruction Manual for Bobcat Skid Steer Loaders

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the JEENDA Bob-Tach Left and Right Hand Lever Kit. This kit is designed as a replacement part for various Bobcat Skid Steer Loaders, ensuring secure attachment of implements.

2. Safety Information

Always prioritize safety when working with heavy machinery and replacement parts. Failure to follow safety instructions can result in serious injury or equipment damage.

Ensure the Bobcat machine is turned off, parked on a level surface, and the parking brake is engaged before beginning any work.
Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
Refer to your Bobcat machine's original service manual for specific safety procedures related to the Bob-Tach system.
Do not operate the machine with damaged or improperly installed Bob-Tach components.
Keep hands and clothing clear of moving parts.

3. Package Contents

The JEENDA Bob-Tach Left and Right Hand Lever Kit includes the following components:

1x Bob-Tach Left Hand Lever (Part No. 6702903)
1x Bob-Tach Right Hand Lever (Part No. 6702904)
2x Bolts (Part No. 17C660)
2x Socket Head Screws (Part No. 7255136)
2x Wedge Pivots (Part No. 6731119)
2x Compression Springs (Part No. 6578253)
2x Bob-Tach Wedges (Part No. 6737191)
2x Pins (Part No. 7277777)
2x Compression Springs (Part No. 6713040)
2x Washers (Part No. 619021)
2x Bolts (Part No. 85D6)

JEENDA Bob-Tach Left and Right Hand Lever Kit components laid out on a white surface.

Image: All components included in the JEENDA Bob-Tach Left and Right Hand Lever Kit.

Video: An overview of the JEENDA Left and Right Hand Lever Kit components, demonstrating the parts included in the package.

4. Compatibility

This Bob-Tach lever kit is compatible with the following Bobcat Skid Steer Loader models. Always verify compatibility with your specific machine's serial number before installation.

Bobcat 751, 753, 763, 773, 7753, 863, 873
Bobcat S130, S220, S250, S300
Bobcat A220, A300
Bobcat S100, S130, S150, S160
Bobcat T110, T130, T140, T180, T190
Bobcat 630, 631, 632, 641, 642, 643, 645
Bobcat 730, 731, 732, 741, 742, 743
Bobcat 853, 864, 883

5. Installation Instructions

Follow these steps carefully to install the Bob-Tach Left and Right Hand Lever Kit. Refer to the diagram for visual guidance.

Diagram showing the assembly of the Bob-Tach Left and Right Hand Lever Kit with numbered parts.

Image: Detailed installation diagram for the Bob-Tach levers.

Preparation: Ensure the Bobcat machine is safely secured and the existing Bob-Tach levers are removed.
Assemble Wedge Pivots: For each lever, insert the smaller compression spring (Part No. 6713040) onto the pin (Part No. 7277777).
Attach Bob-Tach Wedge: Slide the Bob-Tach wedge (Part No. 6737191) onto the pin assembly.
Install Lever Assembly: Insert the assembled pin and wedge into the lever (Left Hand Lever 6702903 or Right Hand Lever 6702904).
Secure with Bolt: Use the appropriate bolt (Part No. 17C660 or 85D6) and washer (Part No. 619021) to secure the lever assembly to the Bob-Tach frame.
Install Main Compression Spring: Place the larger compression spring (Part No. 6578253) over the pivot point.
Final Fastening: Secure the remaining components using the socket head screws (Part No. 7255136) as indicated in the diagram.
Test Operation: After installation, manually operate both levers to ensure smooth movement and proper engagement of the Bob-Tach wedges.

Note: Some users have reported that the springs can be stiff, requiring a spring compressor tool for easier installation. Ensure all bolts and screws are tightened to the manufacturer's specifications.

6. Operation

The Bob-Tach lever system allows for quick and secure attachment and detachment of various implements to your Bobcat Skid Steer Loader.

Attaching Implements:
1. Ensure the Bob-Tach levers are in the open (unlocked) position.
2. Align the implement with the Bob-Tach frame.
3. Slowly raise the loader arms to engage the top hooks of the implement.
4. Tilt the Bob-Tach frame forward to allow the bottom of the implement to seat against the frame.
5. Push the Bob-Tach levers down to engage the wedges into the implement's pockets, securing it in place.
6. Visually confirm that both wedges are fully engaged before operating the machine.
Detaching Implements:
1. Park the machine on a level surface and lower the implement to the ground.
2. Engage the parking brake and turn off the engine.
3. Pull the Bob-Tach levers up to disengage the wedges from the implement.
4. Slowly back away from the implement.

7. Maintenance

Regular maintenance of your Bob-Tach lever kit will ensure its longevity and safe operation.

Inspection: Periodically inspect the levers, wedges, springs, and bolts for signs of wear, damage, or corrosion. Replace any worn or damaged components immediately.
Lubrication: Apply a suitable grease to pivot points and moving parts to ensure smooth operation and prevent rust.
Cleaning: Keep the Bob-Tach system free of dirt, debris, and mud, which can hinder proper engagement of implements.
Fastener Check: Regularly check all bolts and screws for tightness. Re-tighten as necessary to prevent loosening during operation.

8. Troubleshooting

Problem	Possible Cause	Solution
Levers are stiff or difficult to operate.	Lack of lubrication, bent components, or debris in the mechanism.	Clean and lubricate all pivot points. Inspect for bent parts and replace if necessary.
Implement does not attach securely.	Wedges not fully engaging, worn wedges/pins, or incorrect alignment.	Ensure levers are fully engaged. Inspect wedges and pins for wear and replace if needed. Verify implement compatibility and proper alignment.
Unusual noises during operation.	Loose fasteners, worn components, or lack of lubrication.	Check and tighten all bolts and screws. Inspect for worn parts and lubricate moving components.

9. Specifications

Part Numbers: 6724776, 6724775
Material: Metal (Alloy Steel, Iron)
Color: Multicolor (Components may vary in finish)
Product Dimensions: Approximately 6.42"L x 6.42"W (for individual lever components)
Item Weight: 6.2 Kilograms (total kit)
Handle Type: Lever
Handle Attachment Mechanism: Bolt
Hand Orientation: Ambidextrous (Left and Right Hand Levers included)
Additional Features: Easy to Install (with proper tools)

Diagram showing the dimensions of various components of the Bob-Tach lever kit, including springs, bolts, and levers.

Image: Dimensional overview of the Bob-Tach lever kit components.

10. Warranty and Support

Warranty: This product is returnable for 1 year for quality issues, allowing for free return and exchange.

Support: For further assistance, technical questions, or warranty claims, please contact JEENDA customer service through your original point of purchase or visit the official JEENDA website.

JEENDA 6724776 6724775