Jooli H Hollywood LED Mirror Vanity Table with Stool

Introduction

Thank you for purchasing the Jooli H Hollywood LED Mirror Vanity Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new vanity table. Please read these instructions carefully before use and retain them for future reference.

Figure 1: Jooli H Hollywood LED Mirror Vanity Table with Stool.

Safety Information

• Always assemble the product on a clean, soft surface to prevent scratches.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Do not overload drawers or place excessively heavy items on the tabletop.
• Disconnect the LED mirror power supply before cleaning or if not in use for extended periods.
• Wipe with a dry cloth for cleaning. Avoid abrasive cleaners or harsh chemicals.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Vanity Tabletop with Mirror Frame and LED Lights
• Table Legs (2)
• Drawers (2)
• Stool Seat
• Stool Legs (4)
• Assembly Hardware (screws, dowels, drawer slides, etc.)
• USB Power Cable for LED Lights

Setup and Assembly Instructions

Assembly is required for this product. It is recommended to have two people for assembly. While straightforward, some steps may require patience due to the number of fasteners. A screwdriver is necessary; power tools may not be suitable for all angles.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Check against the package contents list.
2. Assemble the Stool: Attach the stool legs to the stool seat using the provided hardware. Ensure all connections are tight.
3. Attach Table Legs: Secure the main table legs to the underside of the vanity tabletop.
4. Install Drawers: Assemble the two drawers according to the separate drawer assembly instructions (if provided). Install the drawer slides onto the vanity frame and then insert the assembled drawers.
5. Connect LED Mirror Power: Plug the USB power cable into the designated port on the mirror frame and connect it to a suitable USB power source (e.g., wall adapter, power bank).
6. Final Check: Verify that all parts are correctly assembled and all fasteners are secure.

Figure 2: Product Dimensions. This diagram illustrates the overall dimensions of the vanity table and stool, including detailed measurements for the table (140cm H x 80cm W x 40cm D), stool (43cm H x 36cm W x 24cm D), and drawer interiors.

Figure 3: Key Features. This image points out important features such as the LED lighting, USB charging port, spacious drawers, and the comfortable, easy-to-clean stool.

Operating Instructions

LED Mirror Lights

The vanity mirror is equipped with integrated LED lights for optimal illumination. To operate:

• Ensure the USB power cable is connected to a power source.
• Locate the power switch on the mirror frame or cable. Press to turn the lights ON/OFF.
• Some models may feature adjustable brightness or color temperature. Refer to specific controls if available.

Drawers

The two spacious drawers provide storage for cosmetics, jewelry, and other personal items.

• Gently pull the drawer handles to open.
• Push firmly to close, ensuring they are fully seated.
• Avoid forcing drawers if they feel stuck; check for obstructions.

USB Charging Port

A USB charging port is integrated for convenient charging of small electronic devices.

• Connect your device's USB cable to the port.
• Ensure the vanity's LED lights are powered on for the USB port to function.

Maintenance

Proper care will extend the life and appearance of your vanity table.

• Cleaning: Wipe surfaces with a soft, dry cloth. For stubborn marks, a slightly damp cloth followed by a dry cloth can be used. Avoid harsh chemicals, abrasive cleaners, or excessive moisture.
• Mirror Care: Clean the mirror with a standard glass cleaner and a lint-free cloth. Do not spray cleaner directly onto the mirror frame or LED components.
• Stool Maintenance: The stool seat is made of faux leather. Wipe clean with a damp cloth. Avoid sharp objects that could puncture the material.
• Hardware Check: Periodically check all screws and fittings to ensure they remain tight. Re-tighten as needed to maintain stability.

Troubleshooting

If you encounter any issues, please refer to the following common solutions:

• LED Lights Not Working:
  • Ensure the USB power cable is securely plugged into both the mirror and a working power source.
  • Check if the power source (e.g., wall adapter) is functioning correctly.
  • Verify the power switch on the mirror or cable is in the "ON" position.
• Drawers Are Sticking or Difficult to Open/Close:
  • Check for any obstructions inside the drawer or along the slides.
  • Ensure the drawer slides are properly aligned and securely attached.
  • Verify that the drawer contents are evenly distributed and not overloaded.
• Vanity Table Feels Unstable:
  • Re-check all assembly screws and fasteners, tightening any that are loose.
  • Ensure the table is placed on a flat, level surface.

Specifications

Warranty and Support

Jooli H products are manufactured to high-quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, missing parts, or warranty inquiries, please contact your retailer or the manufacturer directly through their official website or customer service channels. Please have your model number (HM0548102) and purchase date available.