1. Introduction
Thank you for purchasing the Lucande Ezana LED Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.
2. Safety Information
WARNING: Electrical installation should only be performed by a qualified electrician.
- Ensure the main power supply is switched off at the circuit breaker before installation, maintenance, or cleaning.
- This product is designed for indoor use only (IP20 rating). Do not expose to moisture or direct water.
- The light source is integrated LED and cannot be replaced by the user.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and pose safety risks.
- Ensure the mounting surface can support the weight of the fixture.
- Always use appropriate tools and follow local electrical codes.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.
- Lucande Ezana LED Pendant Light fixture (with integrated LED light source)
- Ceiling mount bracket
- Mounting hardware (screws, wall plugs)
- Instruction Manual (this document)
4. Setup and Installation
Follow these steps for safe and correct installation of your pendant light.
- Prepare for Installation: Switch off the main power supply at the circuit breaker. Clear the installation area.
- Mount the Ceiling Bracket: Secure the ceiling mount bracket to the ceiling using the provided screws and wall plugs. Ensure the bracket is firmly attached and can support the fixture's weight (2.5 kg).
- Electrical Connection: Connect the fixture's electrical wires to your household wiring. Ensure correct polarity (Live, Neutral, Earth). This fixture requires a 230V AC supply.
- Attach the Fixture: Carefully lift the pendant light and attach it to the ceiling mount bracket. Secure it with the provided screws.
- Adjust Suspension Height: The pendant light's suspension height is adjustable up to a maximum of 150 cm. Adjust the cables to achieve your desired height before final tightening.
Figure 4.1: Product Dimensions. The light has a maximum height of 150 cm and a diameter of 80 cm.
Figure 4.2: Ceiling Mount Detail. This image shows the robust ceiling attachment for secure installation.
Figure 4.3: Suspension Cable Adjustment. The cables can be adjusted to customize the pendant's hanging height.
Figure 4.4: Internal Wiring. This view illustrates the LED driver and connection points within the ceiling canopy.
5. Operating Instructions
Once installed and connected to the power supply, the Lucande Ezana LED Pendant Light can be operated via a standard wall switch. The fixture features an integrated dimmer function, allowing you to adjust the light intensity to create your desired ambiance. The control method for dimming is typically touch-sensitive, either on the fixture itself or via a compatible wall dimmer (if installed separately and compatible with LED dimming).
6. Maintenance
To ensure the longevity and appearance of your pendant light, follow these maintenance guidelines:
- Cleaning: Always switch off the power supply before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, switch off the power and consult a qualified electrician.
- Light Source: The integrated LED light source is designed for long-term use and is not user-replaceable.
7. Troubleshooting
If you encounter issues with your Lucande Ezana LED Pendant Light, refer to the following common problems and solutions:
- Light does not turn on:
- Check if the main power supply is switched on.
- Verify that the wall switch is in the 'ON' position.
- Ensure all electrical connections are secure (consult a qualified electrician if unsure).
- Light flickers or dims unexpectedly:
- Check for loose connections.
- Ensure the dimmer switch (if applicable) is compatible with LED lighting.
- Unusual noise or smell:
- Immediately switch off the power supply at the circuit breaker.
- Contact a qualified electrician or the retailer for assistance. Do not attempt to repair it yourself.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Lucande |
| Model Number | 9624256 |
| Material | Metal |
| Color | Nickel |
| Product Dimensions (L x W x H) | 80 x 80 x 150 cm (Max Height) |
| Weight | 2.5 kg |
| Voltage | 230 Volts |
| Wattage | 53 Watts (LED) |
| Light Source Type | Integrated LED |
| Number of Light Sources | 1 |
| Area Lighting Classification | IP20 |
| Protection Class | I |
| Installation Type | Ceiling Mount |
| Control Method | Touch (for dimming, if compatible system is installed) |
| Energy Efficiency Class (New) | E |
| Energy Consumption | 52 kWh/1000h |
Figure 8.1: Energy Efficiency Label. For more details, visit the EPREL database.
9. Warranty and Support
This Lucande product is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. For technical support or inquiries, please contact the retailer or Lucande customer service.
10. Disposal
This product falls under the Waste Electrical and Electronic Equipment (WEEE) directive. Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. Proper disposal of old appliances helps prevent potential negative consequences for the environment and human health.