1. Introduction
Thank you for choosing the Wahl Home Haircutting Clipper Kit, Model 79722. This kit is designed for convenient and effective at-home hair cutting and trimming. Please read this manual thoroughly before first use to ensure proper operation, maintenance, and safety.
2. Kit Contents
Your Wahl Home Haircutting Clipper Kit includes the following items:
- Wahl Corded Hair Clipper (Model 79722)
- 12 Color-Coded Attachment Guards (ranging from 1/16" to 1")
- Clipper Blade Oil
- Cleaning Brush
- Styling Comb
- Scissors with Blade Cover
- Ear Taper Guides (Left and Right)
- Handled Storage Case
Figure 2.1: Complete Kit Contents
Figure 2.2: Color-Coded Guard Lengths
3. Safety Information
For external use only. Always ensure the clipper is unplugged before cleaning or maintenance. Keep out of reach of children. Do not immerse the clipper in water. This product is designed for use with USA plugs only (110-120V).
4. Setup
4.1 Initial Inspection
Upon opening, inspect all components for any damage. If any part appears damaged or tampered with, do not use the product and contact customer support.
4.2 Blade Oiling
Before first use, and regularly thereafter, apply a few drops of the provided clipper oil to the blades. Turn the clipper on for a few seconds to allow the oil to distribute evenly. This ensures optimal cutting performance and blade longevity.
4.3 Attaching a Guide Comb
Select the desired color-coded attachment guard based on the hair length you wish to achieve. Align the guard with the clipper blade and firmly snap it into place. Ensure it is securely attached before operating the clipper.
Figure 4.1: Clipper with Attachment Guards
5. Operating Instructions
5.1 Powering On/Off
Plug the clipper into a suitable electrical outlet. Use the side switch to turn the clipper ON (I) or OFF (O).
5.2 Hair Cutting Technique
For best results, cut hair when it is clean and dry. Move the clipper against the direction of hair growth. Use smooth, overlapping strokes for an even cut. The powerful motor ensures no-snag cutting.
Figure 5.1: Proper Hair Cutting Technique
5.3 Adjustable Taper Lever
The adjustable taper lever allows for easy blending and fading. Move the lever up for a closer cut and down for a longer cut. This feature is useful for blending hair between different guard lengths or for finishing edges.
Figure 5.2: Adjustable Taper Lever
5.4 Using Ear Taper Guides
The kit includes specific ear taper guides (left and right) to blend hair around the ears. Attach the appropriate guide and gently move the clipper around the ear, following the natural curve, to achieve a smooth transition from short to long hair.
Figure 5.3: Ear Taper Guide Usage
6. Maintenance
6.1 Cleaning the Blades
After each use, remove the attachment guard and use the provided cleaning brush to brush away any loose hairs from the blades. For thorough cleaning, the blades can be removed (refer to the detailed instructions in the included manual for blade removal and reattachment).
6.2 Oiling the Blades
Regular oiling is crucial for maintaining the self-sharpening precision blades. Apply 2-3 drops of Wahl Clipper Oil across the top of the blades and 1 drop on each side of the blade set after every few haircuts. Run the clipper for a few seconds to distribute the oil.
Figure 6.1: Self-Sharpening Precision Blades
6.3 Storage
Store the clipper and all accessories in the provided handled storage case in a cool, dry place. Ensure the blade guard is on the clipper when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Not plugged in correctly; power outlet issue. | Ensure the clipper is fully plugged into a working outlet. Test the outlet with another appliance. |
| Clipper pulls hair or cuts poorly. | Blades are dull, dirty, or not oiled; hair is wet. | Clean and oil the blades. Ensure hair is dry before cutting. If blades are dull, consider replacement. |
| Clipper makes a loud humming noise but doesn't cut. | Power screw adjustment needed. | Adjust the power screw (located on the side of the clipper) using a screwdriver. Turn clockwise until a loud hum is heard, then slightly counter-clockwise until the noise lessens but the motor still runs powerfully. |
8. Specifications
- Model: 79722
- Brand: Wahl
- Power Source: Corded (USA plugs only, 110-120V)
- Blade Type: Self-sharpening precision blades
- Attachment Guards: 12 color-coded guards (1/16" to 1")
- Dimensions: 7.88 x 11.25 x 3.38 inches
- Weight: 2 Pounds
- GTIN/UPC: 043917111513
9. Warranty and Support
Wahl products are manufactured to high standards. For warranty information, product registration, or further assistance, please refer to the documentation included in your kit or visit the official Wahl website. You can also find product tutorials and FAQs on their website: wahlusa.com.