VINABTY RC49141 Replacement Remote Control User Manual for Hitachi TV Models

Introduction

This user manual provides detailed instructions for the VINABTY RC49141 replacement remote control. This remote is specifically designed to be compatible with a range of Hitachi TV models, offering a direct replacement for your original remote without the need for complex programming.

The VINABTY RC49141 remote control is compatible with the following Hitachi TV models:

32HB1W66l, 32HB5W66, 43HL15W64, 32HB6T61A, 32HB4W65I, 32HB4T62, 40HB1W66l, 32HB4T41, 32HB4T62A, 32HB4T61
32HB4T61H, 32HB4T62H, 32HB6T41A, 43HB5T62, 32HB4T61-Z, 43HK4W64, 43HK5W64, 43HL15W69, 43HL5W69, 48HB6W62A
49HB5W62, 49HB6W62H, 49HK4W64, 49HK5W64, 49HK5W64A, 49HK5W64H, 49HL15W69, 49HL5W69, 55HB6W62A, 55HGW69K
55HK4W64, 55HK5W64, 55HK5W64A, 55HK5W64H, 55HL15W69, 65HL15W64, 65HL15W64A, 65HZ6W69A, 55HL5W69

Setup

The VINABTY RC49141 remote control is designed for immediate use. No programming or complex configuration is required. Simply install the batteries, and the remote will be ready to operate your compatible Hitachi TV.

Battery Installation

Locate the battery compartment on the back of the remote control.
Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
Insert two AAA alkaline batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Replace the battery compartment cover by sliding it back into position until it clicks securely.

Once batteries are installed, the remote control is ready for use.

VINABTY RC49141 Replacement Remote Control for Hitachi TV — An image showing the VINABTY RC49141 replacement remote control. The remote is black, ergonomic, and features standard television control buttons including a power button, number pad, volume and channel controls, navigation buttons, and dedicated buttons for Netflix and other functions.

Operating Instructions

This section describes the primary functions of the buttons on your VINABTY RC49141 remote control.

Power Button (): Turns the TV on or off.
NETFLIX Button: Provides direct access to the Netflix application.
Number Pad (0-9): Used for direct channel selection or entering numerical inputs.
TV Button (): Switches to TV mode or cycles through input sources.
Volume Control (V+/V-): Increases or decreases the TV volume.
Mute Button (): Mutes or unmutes the TV sound.
Channel Control (P^/P<): Changes the TV channel up or down.
Menu Button: Accesses the TV's main menu.
Q.MENU Button: Accesses the Quick Menu for common settings.
Navigation Buttons (Up, Down, Left, Right) and OK Button: Used to navigate through menus and confirm selections.
BACK Button: Returns to the previous screen or menu.
EXIT Button: Exits the current menu or application.
Info Button (i): Displays information about the current program or content.
EPG Button (): Accesses the Electronic Program Guide.
Colored Buttons (Red, Green, Yellow, Blue): These buttons have various functions depending on the TV menu or application.
LANG. Button: Changes the audio language or subtitle language.
SUBT. Button: Toggles subtitles on or off.
Media Control Buttons (Rewind, Play/Pause, Fast Forward, Stop, Record): Controls playback of media content.

For specific functions of certain buttons, refer to your Hitachi TV's original user manual.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your remote control.

Battery Replacement

Replace batteries when the remote control becomes unresponsive or its range decreases significantly.
Always replace both batteries at the same time with new AAA alkaline batteries.
Do not mix old and new batteries, or different types of batteries.
Remove batteries if the remote control will not be used for an extended period to prevent leakage.

Cleaning and Storage

Clean the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
Avoid dropping the remote control or exposing it to moisture.

Troubleshooting

If you experience issues with your remote control, refer to the following common problems and solutions.

Remote Control Not Responding

Check Batteries: Ensure batteries are correctly inserted with the correct polarity (+/-). Replace old batteries with new AAA alkaline batteries.
Line of Sight: Make sure there is a clear line of sight between the remote control's infrared emitter and the TV's infrared receiver. Obstructions can block the signal.
Distance: Ensure you are within the effective operating range (up to 10 meters) of the TV.
TV Power: Confirm that the TV is powered on and not in standby mode.

Buttons Unresponsive or Sticky

Clean Remote: Dust or debris under the buttons can cause them to stick. Gently clean the remote control surface with a dry cloth.
Battery Check: Low batteries can sometimes cause intermittent button response. Replace batteries if necessary.

Specifications

Brand	VINABTY
Model Name	RC49141
Product Model Number	DDCR-RC49141-time
Connectivity Technology	Infrared
Compatible Devices	Television (Hitachi TV models listed in Introduction)
Special Feature	Ergonomic design
Maximum Range	10 Meters
Battery Type	AAA Alkaline (2 required)
Number of Buttons	25

Support

For any issues not covered in this manual, or for further assistance, please contact VINABTY customer support. Refer to the product packaging or the retailer's website for specific contact information.

VINABTY is committed to providing excellent after-sales service. If you encounter any problems with your product or service, please do not hesitate to reach out for support.

VINABTY RC49141