Ovitar 12V Cigarette Lighter Plug with Leads Instruction Manual

1. Introduction

Thank you for choosing the Ovitar 12V Cigarette Lighter Plug with Leads. This manual provides essential information for the safe and effective installation, operation, and maintenance of your product. Please read these instructions carefully before use and retain them for future reference.

2. Product Overview

The Ovitar 12V Cigarette Lighter Plug with Leads is a versatile automotive accessory designed to provide power from a vehicle's 12V-24V cigarette lighter socket to various devices. It features a male plug with an integrated 15A fuse for protection and an LED indicator to confirm power status. The attached leads allow for custom wiring to your specific application.

Image: The Ovitar 12V Cigarette Lighter Plug with Leads, showing the male plug and the red and black bare wire leads.

Key Features:

• Male cigarette lighter plug for automotive power sockets.
• Integrated 15A fuse for overcurrent protection.
• LED indicator to confirm power supply.
• SPT-2, 16AWG/2C red and black leads for flexible connections.
• Compatible with DC 12V to 24V power systems.

3. Safety Information

Observe the following safety precautions to prevent damage to the product, your vehicle, or personal injury:

• Voltage Compatibility: Ensure the connected device operates within the 12V to 24V DC range. Connecting to higher voltages can cause damage.
• Current Limit: Do not exceed the 15A current rating of the fuse. Overloading can blow the fuse or damage the wiring.
• Polarity: Always connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of your device. Incorrect polarity can damage the device or the vehicle's electrical system.
• Secure Connections: Ensure all wire connections are secure and properly insulated to prevent short circuits.
• Water Exposure: While the product has an IP66 waterproof grade, avoid prolonged submersion or direct high-pressure water exposure to the bare leads.
• Fuse Replacement: Only replace the fuse with a fuse of the same type and rating (15A, 250V, 6x30mm).

Image: Illustrates the protective features of the Ovitar 12V Cigarette Lighter Plug, including IP66 waterproof grade, over-heat protection, over-load protection, over-voltage protection, and short-circuit protection.

4. Setup and Installation

This product is designed for custom wiring applications. Follow these steps for proper installation:

1. Identify Device Requirements: Determine the voltage and current requirements of the device you intend to power. Ensure it does not exceed 24V DC and 15A.
2. Prepare Leads: The red wire is positive (+), and the black wire is negative (-). Strip a small portion of insulation from the ends of the red and black leads.
3. Connect to Device: Securely connect the red lead to the positive input of your device and the black lead to the negative input. This can be done via soldering, crimping with appropriate connectors, or using screw terminals, depending on your device. Ensure connections are robust and insulated to prevent short circuits.
4. Verify Polarity: Double-check that the polarity is correct before plugging into a power source.
5. Plug into Vehicle Socket: Insert the cigarette lighter plug firmly into your vehicle's 12V or 24V accessory power socket.

Image: Detailed diagram showing the components of the Ovitar 12V Cigarette Lighter Plug, including the male plug (P1), the bare wire leads (P2), and the internal LED indicator. It also illustrates conductor and jacket specifications, and fuse dimensions.

5. Operating Instructions

Once properly installed, operating the Ovitar 12V Cigarette Lighter Plug is straightforward:

1. Insert Plug: Insert the male cigarette lighter plug into your vehicle's 12V or 24V accessory power socket.
2. Check LED Indicator: The integrated LED light on the plug will illuminate when power is supplied to the plug. This indicates that the connection is active and power is flowing.
3. Power Your Device: Your connected device should now receive power.
4. Disconnect: To turn off power, simply pull the plug out of the vehicle's socket.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your Ovitar Cigarette Lighter Plug:

• Cleaning: Keep the plug and leads clean and free from dust or debris. Use a dry cloth for cleaning.
• Inspect Wiring: Periodically check the leads for any signs of wear, cuts, or damage to the insulation. Replace if damaged.
• Fuse Replacement: If the LED indicator does not light up and your device is not receiving power, the fuse may have blown. To replace the fuse:
1. Unplug the unit from the vehicle's socket.
2. Unscrew the tip of the cigarette lighter plug to access the fuse.
3. Carefully remove the old fuse.
4. Insert a new 15A, 250V, 6x30mm glass fuse.
5. Screw the tip back on securely.

7. Troubleshooting

If you encounter issues with your Ovitar Cigarette Lighter Plug, refer to the following troubleshooting guide:

• No Power / LED Not Lit:
• Ensure the plug is fully inserted into the vehicle's cigarette lighter socket.
• Check the vehicle's cigarette lighter socket for power by testing with another known working device.
• Inspect the fuse within the plug. If blown, replace it with a new 15A fuse (refer to Maintenance section).
• Verify that the vehicle's ignition is on, as some sockets are only powered when the ignition is active.
• Device Not Working (LED is Lit):
• Check the wiring connections between the leads and your device for proper polarity and secure contact.
• Ensure your device is functioning correctly by testing it with another power source.
• Confirm your device's power requirements do not exceed the 15A limit of the plug.

8. Specifications

Image: Technical drawing of the Ovitar 12V Cigarette Lighter Plug with Leads, indicating overall dimensions and cable length for precise installation planning.

9. Warranty and Support

For warranty information or technical support, please contact Ovitar customer service through your original point of purchase. Please have your product model number (OT-CA-34) and purchase details available when contacting support.