Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your HOOBRO End Tables Set of 2, Model BF54BZP201G2. Please read these instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
- Keep the side table away from sharp, pointed objects to prevent damage.
- Avoid contact with corrosive chemicals.
- Children are not permitted to climb on the end table to prevent injury.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight capacity of 44 lbs (20 kg).
Setup and Assembly
The HOOBRO End Tables are designed for straightforward assembly. An assembly guide is included with the product. For a visual guide, please refer to the assembly video below.
Video: HOOBRO Narrow End Table Assembly Guide. This video demonstrates the step-by-step process for assembling the end table, including identifying parts, attaching panels, and securing the frame.
Assembly Steps:
- Unpack and Verify Components: Carefully unpack all parts and hardware. Refer to the included assembly guide to ensure all components are present and undamaged.
- Assemble Drawer Box: Attach the side panels to the front and back panels of the drawer using the provided screws and dowels. Secure the bottom panel.
- Install Drawer Glides: Attach the drawer glides to the inside of the main table structure and to the sides of the drawer box.
- Attach Metal Frame: Secure the metal frame components to the wooden drawer box using the designated screws.
- Install Top Panel: Place the top panel onto the assembled frame and secure it with screws.
- Insert Drawers: Carefully slide the assembled drawers into the glides.
- Attach Knobs: Screw the knobs onto the front of each drawer.
A screwdriver is recommended for assembly. An Allen wrench is typically included with the hardware.

Image: Detailed dimensions of the HOOBRO End Table, showing length, width, and height measurements in both centimeters and inches.
Operation and Usage
The HOOBRO End Tables are designed for versatile use in various living spaces. Their compact size makes them suitable for small areas.
Key Features:
- Compact Design: Sized at 23.6"L x 11.8"W x 24"H, these tables fit well in narrow spaces between recliners, next to sofas, or as bedside tables.
- Ample Storage: Features two drawers for organizing small items like remotes, controllers, and phone chargers. An open shelf above the drawers provides additional space for essential items.
- Multifunctional: Can be used as a side table, end table, snack table, small coffee table, or nightstand in living rooms and bedrooms.

Image: An assembled HOOBRO End Table positioned beside a sofa, showcasing its use as a functional side table with decorative items.

Image: An assembled HOOBRO End Table serving as a nightstand in a bedroom, with both drawers partially open to illustrate internal storage capacity.
Maintenance
Proper care will ensure the longevity of your HOOBRO End Tables.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Protection: Use coasters under drinks and placemats under hot items to protect the tabletop from stains and heat damage.
- Stability Check: Periodically inspect all connections and tighten screws as needed to maintain stability.
- Environment: Avoid placing the tables in direct sunlight or near heat sources to prevent warping or discoloration.
Troubleshooting
If you encounter any issues during assembly or use, please refer to the following common solutions:
- Missing Parts: If any parts are missing from your package, please contact HOOBRO customer service immediately for assistance.
- Wobbly Table: Ensure all screws are fully tightened. If the table remains wobbly, check that all components are correctly aligned according to the assembly instructions. Uneven flooring can also cause wobbling; consider using furniture pads or shims.
- Drawers Not Sliding Smoothly: Verify that the drawer glides are installed correctly and are not obstructed. Ensure the drawer box is assembled squarely. Lubricating the glides with a silicone-based spray can improve movement.
- Difficulty with Assembly: Re-read the instructions carefully, paying close attention to the orientation of each piece. The assembly video can also provide visual clarification. Do not force parts together.
Specifications
| Feature | Detail |
|---|---|
| Brand | HOOBRO |
| Model Name | End Tables Set of 2 BF54BZP201G2 |
| Product Dimensions (L x W x H) | 23.6" x 11.8" x 24" (60cm x 30cm x 61cm) |
| Item Weight | 45.5 Pounds (20.6 kg) |
| Maximum Weight Recommendation | 44 lbs (20 kg) |
| Frame Material | Metal |
| Top Material Type | Engineered Wood |
| Color | Rustic Brown + Black |
| Number of Drawers | 2 |
| Number of Shelves | 1 (open shelf) |
| Required Assembly | Yes |
| Tools Recommended For Assembly | Screwdriver (Allen wrench included) |
Warranty and Support
For specific warranty information, please refer to the documentation included with your purchase or contact HOOBRO customer service directly. HOOBRO is committed to providing quality products and support.
If you require further assistance, have questions about assembly, or need to report missing/damaged parts, please visit the official HOOBRO store or contact their customer support.
Official HOOBRO Store: Visit HOOBRO Store





