Introduction
Welcome to the Bestway LAY-Z-SPA® Vancouver Airjet Plus™ experience. This inflatable spa is designed with DropStitch™ material, offering exceptional rigidity, durability, and strength, while its thin walls maximize internal space. Enjoy a relaxing soak with adjustable massage jets and water temperatures up to 40 °C. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your spa.
Image: The Bestway LAY-Z-SPA Vancouver Airjet Plus inflatable hot tub, showcasing its sleek design and external pump unit.
Safety Information
Always read and follow all instructions carefully before installing and using this product. Failure to do so can result in serious injury or property damage.
- Do not install the spa on an uneven surface.
- Ensure the electrical supply meets the specifications for the spa pump.
- Keep children under supervision at all times when near the spa.
- Do not use electrical appliances near the spa.
- Maintain proper water chemistry to ensure safe and hygienic conditions.
- Do not operate the spa if any part is damaged or malfunctioning.
Components
Your Bestway LAY-Z-SPA® Vancouver Airjet Plus™ package includes the following items:
- 1 x Inflatable Spa Liner (Vancouver Airjet Plus™)
- 1 x Spa Pump with Digital Control Panel
- 2 x Filter Cartridges
- 1 x Insulating Inflatable Cover with Safety Fasteners
- 1 x ChemConnect™ Chemical Dispenser
- Repair Kit (patches)
- Instruction Manual (this document)
Setup
Assembly of your LAY-Z-SPA® Vancouver Airjet Plus™ is straightforward and requires no special tools. Follow these steps for initial setup:
- Site Selection: Choose a flat, stable, and level surface capable of supporting the weight of the filled spa and its occupants. Ensure adequate drainage.
- Unpack Components: Carefully remove all items from the packaging.
- Inflate Spa Liner: Connect the spa pump to the inflation valve on the spa liner. Use the pump's inflation function to inflate the spa until it is firm to the touch but not over-inflated.
- Connect Pump: Attach the spa pump to the spa liner using the provided hoses and connectors. Ensure all connections are secure and watertight.
- Install Filter Cartridges: Insert the filter cartridges into the filter housing inside the spa liner.
- Fill with Water: Fill the spa with fresh water using a garden hose until the water level is between the minimum and maximum fill lines indicated on the spa wall.
- Connect Power: Plug the spa pump into a grounded electrical outlet. Ensure the outlet is protected by a Residual Current Device (RCD/GFCI).
- Initial Heating: Activate the heating function on the digital control panel. Allow sufficient time for the water to reach your desired temperature (up to 40 °C).
Image: A technical diagram illustrating the dimensions of the LAY-Z-SPA Vancouver Airjet Plus, including its inflated size and pump unit measurements.
Operating Instructions
Your spa is equipped with a user-friendly digital control panel for easy operation of its features.
Digital Control Panel
The control panel allows you to adjust temperature, activate the massage system, and manage filtration.
- Power Button: Turns the spa pump on/off.
- Temperature Adjustment: Use the up/down arrows to set your desired water temperature (up to 40 °C).
- AirJet™ Massage System: Press the AirJet™ button to activate the 140 AirJets, providing a soothing bubbling massage. The Vancouver model features 2 massage zones for enhanced relaxation.
- Filter Button: Activates the filtration system to circulate and clean the water.
- Heat Button: Turns the heating function on/off.
- Timer Button: Set a timer for heating cycles to save energy.
Image: A woman enjoying the soothing 140 AirJet™ massage system of the LAY-Z-SPA Vancouver, demonstrating the bubbling effect.
Freeze Shield™ System
The Freeze Shield™ automatic heating feature protects your pump and liner from frost damage during colder temperatures. When activated, the system will automatically heat the water to prevent freezing, ensuring year-round usability.
Image: The LAY-Z-SPA Vancouver with its insulating cover in place, highlighting the Freeze Shield™ technology that protects the spa in cold weather.
Seating Capacity
The LAY-Z-SPA® Vancouver Airjet Plus™ is designed to comfortably accommodate 3-5 people, making it ideal for small gatherings or family relaxation.
Image: Four people comfortably seated in the LAY-Z-SPA Vancouver, demonstrating its spacious interior and capacity for multiple users.
Maintenance
Regular maintenance is crucial for the longevity and hygienic operation of your spa.
Water Chemistry
- Use the included ChemConnect™ dispenser to ensure a stable level of chlorine and its homogeneous dispersion in the water.
- Regularly test the water pH and chlorine levels using a test strip kit. Adjust as necessary according to recommended ranges.
- Shock treat the water periodically to eliminate contaminants.
Filter Cartridges
- Clean filter cartridges daily or every other day by rinsing them with a garden hose.
- Replace filter cartridges every 1-2 weeks, or more frequently depending on usage and water quality.
Spa Cleaning and Draining
- Drain and clean the spa every 1-3 months, or as needed.
- Use a soft cloth and mild, non-abrasive cleaner to wipe down the interior and exterior surfaces.
- Rinse thoroughly after cleaning.
Storage
- Before storing, ensure the spa is completely drained and dry to prevent mold and mildew.
- Deflate the spa liner and fold it neatly.
- Store the spa and pump in a dry, temperature-controlled environment, away from direct sunlight and extreme temperatures.
Troubleshooting
This section addresses common issues you might encounter with your LAY-Z-SPA® Vancouver Airjet Plus™.
| Problem | Possible Cause | Solution |
|---|---|---|
| Spa not heating | Low water level; dirty filter; ambient temperature too low; heater malfunction. | Ensure water level is adequate; clean or replace filter; check Freeze Shield™ system; contact support if issue persists. |
| AirJet™ system not working | Pump not powered; air blower malfunction. | Check power connection; ensure pump is on; contact support. |
| Water cloudy or dirty | Dirty filter; improper water chemistry; insufficient filtration time. | Clean or replace filter; test and adjust water chemistry; run filtration longer. |
| Spa losing air | Leak in liner; valve not sealed properly. | Locate leak using soapy water and repair with patch kit; ensure inflation valve is tightly closed. |
Specifications
Detailed technical specifications for the Bestway LAY-Z-SPA® Vancouver Airjet Plus™:
- Model Number: 60027
- Dimensions (Inflated): 155 cm (61.02") L x 155 cm (61.02") W x 60 cm (23.62") H
- Seating Capacity: 3-5 people
- Water Capacity (80% full): 804 Liters (213 Gallons)
- Voltage: 220 Volts
- Number of AirJets™: 140
- Max. Heat Capability: 40 °C (104 °F)
- Material: DropStitch™ / DuraPlus™ (Puncture-resistant, UV-resistant)
- Shape: Round
- Item Weight (Empty): Approximately 33.51 kg (73.7 lbs)
- Assembly Required: Yes
Image: An infographic summarizing key features of the LAY-Z-SPA Vancouver, including capacity, Freeze Shield™, AirJet™ system, rapid heat, power saving timer, digital control panel, Drop Stitch construction, and inflated size.
Warranty and Support
Bestway products are manufactured to the highest quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official Bestway website. For technical support, spare parts, or any inquiries, please contact Bestway customer service through their official channels.
You can find more information and support at the Bestway Store on Amazon.