Introduction
This manual provides essential instructions for the safe and proper use, assembly, and maintenance of your AFG Baby Furniture Alice Glider Chair and Ottoman. Please read all instructions carefully before assembly and use to ensure optimal performance and safety.
Image: The Alice Glider Chair and Ottoman, featuring a white wooden frame and light gray cushions, designed for comfortable seating.
Safety Information
WARNING: Always follow safety guidelines to prevent injury or damage.
- Ensure all components are securely fastened before use.
- Do not allow children to play unsupervised near or on the glider and ottoman.
- Keep fingers and clothing clear of moving parts during operation.
- Periodically check all screws and bolts to ensure they remain tight.
- This product is intended for adult use.
- Certification meets or exceed ASTM & CPSC standards.
Setup and Assembly
The Alice Glider Chair and Ottoman are designed for straightforward assembly. While specific step-by-step diagrams are not provided here, the general process involves attaching the main components using the included hardware.
- Unpack Components: Carefully remove all parts from the packaging and verify against the parts list (typically found in the included physical manual).
- Assemble Chair Base: Attach the side frames to the main chair base using the provided bolts and Allen wrench. Do not fully tighten bolts until all components are aligned.
- Attach Chair Back and Seat: Secure the chair back and seat to the assembled base. Ensure the gliding mechanism is correctly aligned.
- Assemble Ottoman: Connect the ottoman's side frames and gliding mechanism.
- Install Cushions: Place the thickly padded seat, back, and arm cushions onto the chair. The cushions are removable for easy care.
- Final Tightening: Once all parts are in place and aligned, securely tighten all bolts and screws.
Image: A close-up view of the smooth ball bearing gliding mechanism on the chair base, highlighting the sturdy construction.
Operating Instructions
The Alice Glider Chair and Ottoman are designed for smooth, quiet gliding motion, providing comfort and relaxation.
- Using the Glider Chair: Sit comfortably in the chair, ensuring your back is supported by the back cushion. Gently push off the floor with your feet to initiate the gliding motion. The steel ball bearing glides ensure a smooth and quiet experience.
- Using the Ottoman: Position the ottoman in front of the glider chair. Place your feet on the ottoman to elevate them, enhancing comfort. The ottoman also features a smooth gliding action synchronized with the chair.
- Side Pocket: Utilize the integrated side pocket on the chair for convenient storage of small items such as books, remote controls, or baby essentials.
Image: A close-up of the convenient side pocket on the glider chair, shown holding a rolled magazine and a remote control.
Maintenance and Care
Proper care will extend the life and appearance of your glider chair and ottoman.
- Frame Cleaning: Wipe the solid wood frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cushion Care: The back and seat cushions are removable. For best results, dry clean cushions as specified. Spot clean minor spills with a mild detergent and damp cloth.
- Hardware Check: Periodically inspect all bolts and screws for tightness. Re-tighten as necessary to maintain structural integrity and smooth gliding.
Troubleshooting
If you encounter any issues with your Alice Glider Chair and Ottoman, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Squeaking or stiff gliding motion | Loose hardware; dust or debris in glides; lack of lubrication. | Check and tighten all bolts. Clean gliding mechanism. Apply a silicone-based lubricant to the ball bearings if necessary (avoid oil-based lubricants). |
| Chair or ottoman feels unstable | Loose assembly hardware. | Re-check and tighten all assembly bolts and screws. Ensure the chair is on a flat, level surface. |
| Cushions appear flattened | Normal wear and compression over time. | Fluff cushions regularly. Rotate if possible to distribute wear. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | AFG Baby Alice Solid Wood Glider Chair and Ottoman |
| Model Number | GL7236W |
| Brand | AFG Baby Furniture |
| Color | White (Frame) |
| Material Type | Wood, Fabric, Metal |
| Chair Dimensions (Overall Height) | 40 Inches |
| Chair Seat Depth | 33.5 Inches |
| Chair Seat Width | 27 Inches |
| Ottoman Dimensions (D x W x H) | 34"D x 40"W x 27"H |
| Item Weight | 44 pounds (Combined weight for chair and ottoman) |
| Special Features | Matching ottoman, smooth ball bearing gliding system, thickly padded cushions, integrated side pocket. |
| Included Components | Ottoman |
| UPC | 879065007695 |
Image: Diagram illustrating the dimensions of the ottoman: 27 inches in height, 34 inches in depth, and 40 inches in width.
Customer Support
For further assistance, parts replacement, or any inquiries not covered in this manual, please contact AFG Baby Furniture customer support.
Refer to your purchase documentation or the AFG Baby Furniture website for current contact information.
Online resources may be available at the AFG Baby Furniture Store.