Dremel PC500 Versa Power Scrubber Accessory Value Kit

Introduction

The Dremel PC500 Versa Power Scrubber Accessory Value Kit provides a comprehensive set of cleaning pads and a brush designed for various cleaning applications, from delicate surfaces to heavy-duty tasks. This kit enhances the versatility of your Dremel Versa Power Scrubber, making cleaning more efficient across different materials and areas.

Image: The Dremel PC500 kit, showcasing the variety of cleaning pads and the corner brush included.

What's Included

Your Dremel PC500 Versa Power Scrubber Accessory Value Kit includes the following components:

• 15 Cleaning Pads: Designed for various applications, including polishing, erasing, non-scratch cleaning, kitchen scouring, and extreme scouring. Each type includes 3 pieces.
• 3 x PC362 White Eraser Pads
• 3 x PC363 Blue Non-Scratch Pads
• 3 x PC367 Kitchen Scour Pads (Green)
• 3 x PC361 Brown Heavy Duty Pads
• 3 x PC368 Black Extreme Scour Pads
• 1 PC369 Corner Brush: Specifically designed for cleaning corners and edges.
• 1 Nylon Storage Bag: For convenient storage and organization of your accessories.
• 1 Quick Start Guide: Provides essential information for immediate use.

Image: The Dremel PC500 kit as packaged, showing the included pads and brush.

Setup and Accessory Attachment

The Dremel PC500 accessories are designed for quick and easy attachment to your Dremel Versa Power Scrubber (sold separately) using a hook and loop system. Ensure your Dremel Versa tool is turned off before attaching or detaching any accessories.

1. Select the Appropriate Accessory: Choose the cleaning pad or brush best suited for your cleaning task (refer to the "Operating Instructions" section for guidance).
2. Align and Attach: Align the hook and loop backing of the chosen accessory with the base of your Dremel Versa Power Scrubber. Press firmly to ensure a secure attachment.
3. Verify Attachment: Gently tug on the accessory to confirm it is securely fastened before beginning operation.
4. Detaching Accessories: To remove an accessory, simply peel it off the hook and loop base.

Operating Instructions

This kit provides a variety of accessories for diverse cleaning needs. Always test the chosen pad on an inconspicuous area first to ensure compatibility with the surface and desired cleaning outcome. Use appropriate cleaning solutions as needed for your specific task.

1. PC362 White Eraser Pads

These pads are ideal for delicate surfaces and light polishing tasks. They are effective for removing scuffs and marks without harsh abrasives.

• Recommended Use: Polishing, light cleaning on sensitive surfaces, removing scuff marks from walls or floors.
• Application: Use with water or a mild cleaning solution.

Image: A Dremel Versa tool with a white eraser pad being used to clean a white shoe.

Image: A Dremel Versa tool with a white pad cleaning a glass shower door, demonstrating its use on delicate surfaces.

2. PC363 Blue Non-Scratch Pads

These pads are designed for general cleaning tasks where scratching is a concern. They are effective on various surfaces without causing damage.

• Recommended Use: Non-stick cookware, glass, porcelain, fiberglass, and other delicate surfaces that require gentle scrubbing.
• Application: Use with water and appropriate cleaning agents.

Image: A Dremel Versa tool with a blue non-scratch pad being used to clean a copper pot.

3. PC367 Kitchen Scour Pads (Green)

These green pads are suitable for everyday kitchen cleaning and general scrubbing tasks. They offer a balance of effectiveness and surface safety for common kitchen materials.

• Recommended Use: Sinks, countertops, stovetops, and general kitchen surfaces.
• Application: Use with water and dish soap or kitchen cleaner.

Image: A Dremel Versa tool with a green kitchen scour pad cleaning a stovetop.

Image: A Dremel Versa tool with a green kitchen scour pad cleaning a griddle surface.

Image: A Dremel Versa tool with a green pad cleaning a refrigerator shelf.

4. PC361 Brown Heavy Duty Pads

These pads are designed for more aggressive cleaning tasks on durable surfaces. They provide increased scrubbing power for stubborn dirt and grime.

• Recommended Use: Concrete, garage floors, outdoor furniture, and other robust surfaces.
• Application: Can be used wet or dry, depending on the cleaning task and surface.

Image: A Dremel Versa tool with a brown heavy duty pad cleaning stains from a concrete floor.

5. PC368 Black Extreme Scour Pads

These are the most aggressive pads in the kit, suitable for the toughest cleaning challenges. Use with caution on surfaces that may be prone to scratching.

• Recommended Use: Cast iron, grills, oven racks, and other extremely durable surfaces with baked-on grime.
• Application: Best used with appropriate heavy-duty cleaning solutions.

Image: A Dremel Versa tool with a black extreme scour pad cleaning rust from a trailer hitch.

6. PC369 Corner Brush

The corner brush is specifically designed to reach and clean tight spaces, corners, edges, nooks, and crannies that pads cannot effectively access.

• Recommended Use: Grout lines, sink fixtures, car interiors, and other areas with intricate details or tight angles.
• Application: Use with water or appropriate cleaning solutions.

Image: A Dremel Versa tool with the corner brush cleaning around a sink faucet.

Image: A Dremel Versa tool with the corner brush cleaning a bathroom counter around fixtures.

Image: A Dremel Versa tool with the corner brush cleaning a car interior, reaching into tight spaces.

Maintenance and Care

Proper maintenance of your Dremel PC500 accessories will extend their lifespan and ensure optimal performance.

• Cleaning Pads: After each use, rinse the cleaning pads thoroughly with water to remove any debris or cleaning solution residue. For heavily soiled pads, a mild soap can be used. Allow pads to air dry completely before storing.
• Corner Brush: Rinse the brush bristles under running water to remove dirt. If necessary, use a small brush or pick to dislodge stubborn debris. Allow to air dry.
• Storage: Store all accessories in the provided nylon storage bag in a clean, dry place, away from direct sunlight or extreme temperatures. This helps maintain the integrity of the hook and loop system and the cleaning materials.

Troubleshooting and Best Practices

• Pad Effectiveness: If a pad is not cleaning effectively, it may be worn out or the wrong type for the task. Replace worn pads and ensure you are using the appropriate pad for the surface and soil level.
• Surface Damage: Always perform a spot test on an inconspicuous area before cleaning the entire surface, especially with more abrasive pads (Brown Heavy Duty, Black Extreme Scour). This helps prevent unintended damage.
• Conflicting Information (Blue Non-Scratch Pads): While some general product descriptions might suggest broad use, always refer to the specific instructions provided with your Dremel Versa tool and the accessory kit for detailed material compatibility. For instance, if your Dremel Versa manual advises against using blue non-scratch pads on stainless steel, adhere to that specific guidance to prevent potential scratching or dulling of the finish.
• Accessory Not Staying Attached: Ensure the hook and loop surfaces on both the accessory and the Dremel Versa tool are clean and free of debris. If the hook and loop system is worn, it may be time to replace the accessory.

Specifications

Warranty and Support

For detailed warranty information and customer support regarding your Dremel PC500 Versa Power Scrubber Accessory Value Kit, please refer to the official Dremel website or contact Dremel customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Dremel Official Website: www.dremel.com