Funmit KSTK1 27-inch Laundry Stacking Kit

1. Product Overview

The Funmit KSTK1 Laundry Stacking Kit is designed to securely stack your 27-inch wide front-loading LG or Samsung washer and dryer, optimizing space in your laundry area. This kit provides a stable and durable solution for vertical appliance arrangement, ideal for compact living spaces.

Figure 1.1: Overview of the Funmit KSTK1 Laundry Stacking Kit components.

Package Contents:

• 2 x 26-inch Side Brackets
• 1 x Stopper Bracket
• 4 x Self-Tapping Screws
• 1 x Stacking Support Guide

Figure 1.2: Detailed view of the package contents.

2. Setup and Installation

Proper installation of the KSTK1 stacking kit is essential for safety and stability. Please ensure both your washer and dryer are disconnected from power and water supplies before beginning. It is recommended to have assistance when lifting the dryer.

Installation Steps:

1. Prepare the Washer: Ensure the top surface of your washing machine is clean and dry.
2. Attach Side Brackets: Remove the protective paper from the adhesive strips on the stacking kit side brackets. Apply the double-sided tape to the top panel of the washer to securely fasten the stacking kit side bracket to the side of the top panel. Secure the stacking kit side brackets with screws.
3. Position the Dryer: Carefully lift the dryer and place it on top of the washer, ensuring the dryer's feet align with the designated slots on the stacking kit side brackets. The feet should slide into the openings.
4. Install Stopper Bracket: Slide the stopper bracket backward until the rear foot engages the brackets. Insert the front stacking kit between the brackets on both sides.
5. Secure the Front Plate: Make sure the tabs on the brackets cover the front feet of the dryer. Install the four self-tapping screws into the designated holes on the front plate using a screwdriver to firmly secure the dryer to the washer.

Figure 2.1: Visual guide for the installation process.

Installation Video Guide:

3. Operating Instructions

The Funmit KSTK1 Laundry Stacking Kit is a structural accessory and does not require specific operating procedures. Once installed, operate your LG or Samsung washer and dryer according to their respective manufacturer's instructions. The stacking kit ensures the stability of the stacked units during operation.

4. Maintenance

To ensure the longevity and continued stability of your stacked laundry units, periodic maintenance of the KSTK1 stacking kit is recommended:

• Check Screws: Periodically inspect all installed screws to ensure they remain tight. Tighten any loose screws to maintain secure fastening.
• Clean Surfaces: Keep the stacking kit and the contact surfaces between the appliances clean and free of debris. Use a soft, damp cloth for cleaning.
• Inspect for Damage: Regularly check the side brackets and stopper bracket for any signs of wear, corrosion, or damage. If any damage is observed, contact customer support for replacement parts.

5. Troubleshooting

While the KSTK1 stacking kit is designed for high stability, here are some common issues and their solutions:

• Wobbling or Instability:
  • Ensure all screws are tightened securely.
  • Verify that the dryer's feet are properly seated within the stacking kit's openings. It is crucial that the dryer's feet remain on the dryer and are not removed during installation, as they are designed to fit into the kit's slots.
  • Check that both the washer and dryer are level on the floor. Adjust their leveling feet if necessary.
• Difficulty with Screw Installation:
  • Ensure you are using the provided self-tapping screws.
  • Apply firm, steady pressure while screwing to allow the self-tapping feature to work effectively. If issues persist, ensure the pilot holes are clear.

6. Specifications

Figure 6.1: Dimensional specifications of the KSTK1 stacking kit.

7. Warranty and Support

Funmit is committed to providing high-quality products and excellent customer service. If you encounter any quality problems or require assistance with your KSTK1 Laundry Stacking Kit, please do not hesitate to contact the Funmit customer service team. We are dedicated to resolving your issues promptly.

For additional information or a detailed fact sheet, you may refer to the official documentation provided by the manufacturer:

• Fact Sheet (PDF)

Why Choose Funmit?